![]() |
HIS V1 install manual wanted
As the title states. I finally received a replacement for my damaged V1 unit. I had restored the pulleys to stock to occasionally drive the car last summer. I have all the parts but cant remember how to reconfigure the pulleys for the supercharger.
There must be a PDF somewhere. I have a V2 manual but I think it might be different. Thanks in advance! |
I put it all together yesterday how I *think* it goes but I wouldn't dare crank the engine and risk damage. What I really need is to reconcile the pulley configuration with the manual before going any further. Even a phone pic of that page/pages would really help. I know there are several V1 owners out there. Somebody be a good Samaritan and help me out please.
|
Nevermind...spent the evening yesterday and a good chunk of today putting the pulleys, blower, etc back in.
I am please to say that finally my ordeal is over, my supercharger is working perfectly. I was without the blower from early May until now. This due to a mistake on my part which destroyed the supercharger.. This was a costly error but I am pleased to say the car drives amazing again. Compared to my WRX, running the FR-S on the Ecutek dyno tune for the blower with no blower in the car was a sluggish drag. Hopefully I can enjoy many years of reliable performance and the memory of this experience will fade. |
| All times are GMT -4. The time now is 06:22 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
User Alert System provided by
Advanced User Tagging v3.3.0 (Lite) -
vBulletin Mods & Addons Copyright © 2026 DragonByte Technologies Ltd.