Keyless Entry Reversal on 2013 BRZ
 

Hey everyone,

I have a 2013 Subaru BRZ Limited in Canada. I saw the post about being able to change the keyless so that when you hold the handle, it will unlock both doors as opposed to one. I noticed when i did this and am walking up to the car and click the unlock button instead, now it will only unlock one door, which basically mean the two things were reversed.

I would like to revert it back to what it was before which is the button unlocks both door and the handle only unlocks one. I tried doing the same method (open door/hold unlock and lock for 5 seconds till it beeps), however it won't revert back. Didn't see anything in the manual either.

Anyone able to shed some light on this or do i need to go into a dealer?

TL;DR: did trick to change smart key unlock to both doors without button, want to revert back to one door/both doors with unlock button, how?

Thanks :thanks:

This isn't really an answer to your question but don't you press unlock twice to unlock both doors?

http://www.ft86club.com/forums/showthread.php?t=16518

here you go!

I can but it beeps like 4 times which is kind of annoying. Would prefer to revert it back to hit unlock to open both doors and use the handle to only open driver's side door.

Thanks for that! But I did that and now am trying to reverse it back to the factory default which is unlock both doors with fob and handle unlocks one door.