Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB

- Member's Car Journals (https://www.ft86club.com/forums/forumdisplay.php?f=40)

- - JonRZ's 17' BRZ JDM tS Build (https://www.ft86club.com/forums/showthread.php?t=121181)

JonRZ's 17' BRZ JDM tS Build

Welcome to JonRZ's 17' BRZ JDM tS Build
Instagram: @TheJonRZ

The Current Build:
Exterior:
STI Front Spoiler
STI Side Spoiler
STI Rear Spoiler
STI Front/Rear Badges
STI Valve Stems
STI Front Cherry Blossom Red Grill Lip
STI Rear Cherry Blossom Red Pinstripe
Helix Clear Side Markers
OLM Carbon Fiber Rear Mirror Covers
Drambeenie 17' Spoiler Riser

Interior:
STI Push Button Start
STI 6MT Shift Knob
'STI' Door Sill Covers
'STI' Center Seat Warm Coverplate

Suspension:
STI Front Flexible Strut Tower Brace
STI Coil Springs (paired with Performance Package Sachs Dampers)
STI Transmission Mount
STI Rear Trailing Arms

Engine/Performance:
STI Sport Performance Muffler/Exhaust
WORKS Drop-In Air Filter

Wheels/Tire/Brakes:
STI Enkei 18x7.5 15-Spoke Black Wheels
Firestone Firehawk Indy 500 225/45/18
Brembo BBK w/ 12.8in/12.4in Rotors (Performance Package)

The Goal:
To achieve the closest JDM tS build based on the MY17 BRZ as possible.

The Influences:
There others who have gone down this route such as @kuczynskika and @DSOmegaX and I had always been a huge fan of their progress and the dedication to keeping something in-house (in this case STI) as far as mods go.

After seeing the 2017 BRZ STI Sport Concept at the Tokyo Auto Salon, and learning about the subtle yet significant MY17 changes which closely resembled this concept - I knew I had to order one.

The 2017 BRZ STI Sport Concept:

http://img-cdn.jg.jugem.jp/360/25051...15_4850060.jpg
http://img-cdn.jg.jugem.jp/360/25051...15_4850061.jpg
http://img-cdn.jg.jugem.jp/360/25051...15_4850063.jpg

New Look
https://i.imgur.com/xBBidNL.jpg

The Conclusion:
I'm very excited to continue modifying this car and thread based on the above principals of sticking to an all 'in-house' STI/tS build. I will continue to update this thread with my progress in hopes of also positively having an impact on the car community, especially with our FT86/BRZ/FRS Community!

Thanks for taking a look and feel free to reach out!

- Jon

**Reserved for Pictures of Modifications/Install!**

Excited to see this build progress! I plan on making similar mods to my 17 just because I love the look of the STI sport concept.

Looking forward to this as well. How does the 2018 TS compare to that JDM ts concept?

One thing I noticed that the 2018 TS will have is the same foglight grill that the concept has. Might be another thing to add to your list!

Quote:

Originally Posted by Drambeenie (Post 2960804)

From what I can tell, the 2017 STI Sport Concept was nothing more than a 2017 BRZ with performance package, special color, 18" STI 15-Spoke Enkei Wheels and STI Sport Exhaust with the foglight grill and some interior bits colored including the seats. It doesn't look lowered by the STI Springs (15mm) so I would venture to guess it's otherwise a glorified 2017 BRZ with performance package and a few add-on bits hence the want to buy it :)

The STI Performance Exhaust was certainly the hardest to come by and the most expensive of the mods above. I also had to fit a 13-16 midpipe to get the axleback to fit as the flanges (as you know) are difference on the 17'. They do make an updated STI axleback but it's almost impossible to find at the moment despite having the part number.

I will say however that I like my foglights. Mind you, I ordered this car back in January. I likely would have waited for a 2018 tS had I known ... but, since I didn't, I'm making it my own!

Quote:

Originally Posted by JonRZ (Post 2960676)

[B][LEFT][SIZE="4"][FONT="Arial Narrow"]Welcome to
The Goal:
To achieve the closest JDM tS build based on the MY17 BRZ as possible.

The Influences:
There others who have gone down this route such as @kuczynskika and @DSOmegaX and I had always been a huge fan of their progress and the dedication to keeping something in-house (in this case STI) as far as mods go.

The Conclusion:
I'm very excited to continue modifying this car and thread based on the above principals of sticking to an all 'in-house' STI/tS build. I will continue to update this thread with my progress in hopes of also positively having an impact on the car community, especially with our FT86/BRZ/FRS Community!

Thanks for taking a look and feel free to reach out!

- Jon

Eyyyyyyy! Good to see someone else committing! :thumbsup:

Do you have and before and after pics of the sti pinks installed?

Quote:

Originally Posted by imnotsureaboutbrz (Post 2974047)

Do you have and before and after pics of the sti pinks installed?

Apologies for the quality, but you can see (especially with the rear wheel) the 15mm difference. These are on the stock 17x7.5 215 Tires.

Went down a 130mi. mountain pass stretch north of Pittsburgh with a few members of our local club and ended up in Brady's Bend. Just thought I'd share a quick photo I took this past Sunday!

https://i.imgur.com/PRCul7v.jpg

Just a quick note! I ordered the tS Red Trim and tS 18x7.5 STI Wheels successfully! So I'll be able to confirm to those wanting these parts. Here are the part numbers for reference. Pics to come!

28111CA130 - 18" tS/STI Wheels
J1210CA301 - Front Red/Cherry Stripe tS Molding
J1210CA401 - Rear Red/Cherry Stripe tS Molding

Can you confirm the part numbers for the front grill pieces? I like the way the mesh grill looks on the tS model

Quote:

Originally Posted by derekbrz24 (Post 3047118)

Can you confirm the part numbers for the front grill pieces? I like the way the mesh grill looks on the tS model

I like them too! May need to confirm with @trippinbillies40 on a part number. He's been on fire with them lately.

This may help ... https://parts.subaru.com/a/Subaru_20...10-590-06.html

Front and Rear tS came in!
J1210CA301 - Front Red/Cherry Stripe tS Molding
J1210CA401 - Rear Red/Cherry Stripe tS Molding

https://i.imgur.com/hiVc66J.jpg

https://i.imgur.com/YFfzAri.jpg

https://i.imgur.com/IslRADy.jpg

Quote:

Originally Posted by JonRZ (Post 3047854)

Front and Rear tS came in!
J1210CA301 - Front Red/Cherry Stripe tS Molding
J1210CA401 - Rear Red/Cherry Stripe tS Molding

Dang you definitely took the plunge! Let us know how the install goes! Kinda curious.