Black Buttons 2.0
 

So, after reading the Black Buttons thread i picked up quite a few things. But you have to go through 20 something pages before how and what you need to order starts to make sense.
So this is it broken down as plain and simple for anyone who plans to order these in the future.
http://i1374.photobucket.com/albums/...ps792c58fc.jpg


- (TECHNICAL NAME) - - - - (PART ##)
1 COVER, PLASTIC Toyota SU00303270 1 - Right door handle
2 COVER, PLASTIC Toyota SU00303271 1 - Left door handle
3 HANDLE, INDOOR Toyota SU00301562 1 - Right door lever (with lock)
4 HANDLE, INDOOR Toyota SU00301563 1 - Left door lever (with lock)
5 COVER, PLASTIC Toyota SU00301927 1 - Right Knee Pad garnish
6 COVER, PLASTIC Toyota SU00301928 1 - Left Knee Pad garnish
7 COVER, PLASTIC Toyota SU00301932 1 - Dash trim (passenger dash) US LHD
8 COVER, PLASTIC Toyota SU00301910 1 - Dash trim (radio surround) US LHD
9 COVER, PLASTIC Toyota SU00303190 1 - Shifter surround
10 COVER, PLASTIC Toyota SU00301915 2 - AC vent covers. (you need 2 of these)
11 COVER, PLASTIC Toyota SU00304253 1 - Steering wheel trim
12 HANDLE, SWITCH Toyota SU00300883 1 - MT shift knob
13 COVER, PLASTIC Toyota SU00301931 - Dash trim (passenger dash) RHD Vehicle
14 COVER, PLASTIC Toyota SU00301909 1 - Dash trim (radio surround) RHD Vehicle
15 SWITCH Toyota SU00302486 1 - Buttons (traction control/sport) (manual)
16 SWITCH Toyota SU00302487 1 - Buttons (Traction control/sport - Sport/Snow)(Attomatic)
17 CLIP Toyota SU00302967 (as many as you think you'll need)- Extra clips, just incase you happen to break them or lose them


Door card removal: http://www.ft86club.com/forums/showthread.php?t=12520
Inner HVAC garnish: http://www.ft86club.com/forums/showthread.php?t=13583

Vent rings: Just get a tool under them and pop them off
Door handle garnish: See Door card removal
Radio/dash panel: See JDM knee pad DIY
Sport/Trac buttons: See JDM knee pad DIY
Shifter garnish: See JDM knee pad DIY

Sites to order from
http://www.toyotapartszone.com/
http://www.amayama.com/
http://www.villagescionparts.com/pro...e=0&searchTerm=
US members can order MOST of these parts locally from toyota. Almost all part numbers will work there minus RHD specific pieces and the MT shift knob. I believe.
And Some canadian dealerships will also order them in @Assunta
Just not mine apparently:(

Origional Thread about Black Buttons
http://www.ft86club.com/forums/showthread.php?t=22352


Big Thanks to! @Superhatch @jazztennor @Nikkojoe
Compiled their information into a much neater package for all:bow::thanks::respekt:


NOTE: Picture above does not show the toyota shift knob. Below is the picture of the part

http://i1374.photobucket.com/albums/...ps34f5762e.jpg
And this is what the final product all black out looks like:coolpics::coolpics:
http://i1374.photobucket.com/albums/...psabbdcfc2.jpg

This is awesome! Thanks for taking the time and putting in the effort to get this all into one post... On the first page no less!

Awesome thanks for compiling this

thanks for this, i did everything except the door levers and dash trims. looks a lot better now without that cheap silver trim that wears off anyway. i did notice that the cf look on the oem pieces is a vinyl though, so i'm sure it's the same black pieces under and you could probably peel it off and goo gone it and have the same thing. not sure if anyone has tried or done that, just something i noticed that i figured i'd point out.

Thank you for this. Mine should be here in two weeks :)

I wanted to ask, are the OEM knee pads, the actual padded knee pads or just black colors trim?

Holy crap you are an awesome human being for putting this together...

Sent from my Nexus 10 using Tapatalk

They are that side piece of plastic, black aclantara wrapped with red stitching. They are a bit easier on the knee but, they don't have foam in them or anything.

Finally ordered the blackbuttons, tried the local 'yoda dealership. After about 10min of searching he thinks he found the right buttons. Had him match the part # to make sure he wasn't pulling the silver stockers... should be here by the end of the week!:party0030:

Thanks a lot for this! This is just what I needed for my new project of 2015... Scion FR-S "RC" ;)

Right on - just ordered the full set minus the shift knob from Amayama. Comes out to 189.54 shipped to NY.

Just installed all of mine - I'm having second thoughts on the door handle lever (the silver piece that you pull to open the door). I'm not sure I like the black over the silver.

bump for awesome thread, ordering a few of these parts :thumbsup:

thats the main reason i didn't do it, the flat black feels cheap, and then i went pull strap :lol:

Love your pull strap mod!

Sent from my Nexus 5 using Tapatalk