BoostLab BL5858 T3 Turbo - $500 shipped
 

SOLD




Selling a turbo I bought for my setup that I'm not going to use and have not connected to anything; no fluids have been run through it. It's a turbo put together by a specialist company named Boostlab- the turbo is modeled after a generic Garrett T3/T04E frame but has the milling to fit a larger Precision style compressor and exhaust wheel.

As you've probably put together, this should perform similarly to a PTE5858.
It is configured as follows-

T3 flange
T31 exhaust housing w/ 2.5" discharge in .63 AR
T04E style compressor housing with 3" inlet / 2"outlet
I took the following measurements

Compressor wheel
Inducer-56mm
Exducer-80mm

Exhaust wheel
Exducer-56mm
Inducer-64mm


Link to product -
https://www.theboostlab.com/bl-5858-billet-turbocharger

Bump

@Joveen

Soon! Lol

Sent from my SM-N960U using Tapatalk

This sold, thread can be closed