*SOLD* TRD RS 2.0 Forged Wheels w/ Tires
 

These have been sitting for a while now. I have another set of wheels and absolutely love. I don't think I'll be selling my car any time soon so this is going up for sale. I am the original owner of my car and these stock TRD wheels.

TRD RS2.0 Forged Wheels (17x7.5 +43, squared)
-Bridgestone Turanza All Season Tires (215/45 R17, squared) *Original tires from new*
-Original TPMS sensors still installed
-OEM Wheel Lug Nuts included
-New OEM Scion Wheel Caps (Came with the car, don't know if they are for these wheels)
*Will clear '17+ BRZ PP Brembo Brakes

Condition: All blemishes are pictures below.
Wheel #1 and 2: Coating is chipping around TRD center cap. (known issue with RS2.0 wheels)
Wheel #3: Perfect.
Wheel #4: Slight curb damage smaller than a dime.

Tires have at least a few seasons left on them. (Only used them for 10K miles)


SOLD

*Update on 5/18/21* Gave them a wash during lunch today :drool:
https://i.ibb.co/h78hXvr/20210518-200116.jpg https://i.ibb.co/cTpkjm5/20210518-200108.jpg

I have the same wheels but mine are the gunmetal color ones- not the shiny ones. I believed the shiny ones are for RS2.0 and the gunmetal ones are as an accessory


Sent from my iPhone using Tapatalk

Yep, correct!

pm'd

Replied!

Updated with images of the cleaned wheels.

Free bump. Love mine.

Wow this definitely inspired me.

Here’s mine! https://uploads.tapatalk-cdn.com/202...d72a088f4b.jpg

Wow, the wheels look amazing on the DGM. All your car needs are the TRD fender fins and your car would literally be perfect in my eyes.

:D I have been looking at getting some for a long time haha. So hard to find the carbon versions now and they are waaay too expensive when you do see a set.

Yeah, I'm on the same boat. Unfortunately they go for $1K+ for a new-ish set unfortunately since they are discontinued now. I might just end up going for an unpainted one and paint matching it at this point before those become discontinued too.

I think this is the move. They sell them already paint matched as well if you have one of the more common colors. You could also get them laid in carbon fiber if you wanted to go the extra mile. Even then they're pretty expensive for how small they are.

Unfortunately, I don't. I have the RS 2.0 so I'm forced to get one unpainted if I want it paint-matched. There were genuine TRD CF fins on JP auctions going for around MSRP but they have a few slight blemishes if you don't care about that. I think I'd still rather get it paint-matched if it had blemishes though.