Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB
Page 1 of 2 1 2
Show 40 post(s) from this thread on one page

Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB (https://www.ft86club.com/forums/index.php)
-   Transmission and Driveline (https://www.ft86club.com/forums/forumdisplay.php?f=61)
-   -   Sold (https://www.ft86club.com/forums/showthread.php?t=141514)

86TOYO2k17 07-19-2020 02:40 PM
Sold
 
2 Attachment(s)
I installed these and drove about 20mins less than 15miles and decided to go back to my STI mounts. Combined with trans mount insert, rear diff collar inserts, and 1pc carbon driveshaft the vibration under 2k rpm was too much for me on my daily driver. Above 2k rpm it wasn’t really different.
My loss is your gain.
Can’t get any newer “used” mounts.

150$ shipped.

kevtronzero 07-19-2020 03:29 PM
PM sent

Summerwolf 07-19-2020 08:14 PM
Quote:
Originally Posted by 86TOYO2k17 (Post 3350495)
I installed these and drove about 20mins less than 15miles and decided to go back to my STI mounts. Combined with trans mount insert, rear diff collar inserts, and 1pc carbon driveshaft the vibration under 2k rpm was too much for me on my daily driver. Above 2k rpm it wasn’t really different.
My loss is your gain.
Can’t get any newer “used” mounts.

Asking 210$ shipped to lower 48 states w/ paypal.
I recently just shipped oem mounts across entire country was 24$.
FACK.

86TOYO2k17 07-20-2020 06:32 PM
Bump still for sale

Joveen 07-20-2020 06:45 PM
Are you NA or FI? I think that would make a difference. If have them when I get some funds I'll take them.

Sent from my SM-N960U using Tapatalk

86TOYO2k17 07-20-2020 07:06 PM
Quote:
Originally Posted by Joveen (Post 3350794)
Are you NA or FI? I think that would make a difference. If have them when I get some funds I'll take them.

Sent from my SM-N960U using Tapatalk
FI, might contribute but definitely the combination of everything else.
I knew the cuscos would add vibration at idle and below 2k rpm and thought I wouldn’t mind but i couldn’t do it. Above 2k rpm it’s not much different. Definitely does what it’s supposed to do.

Just PM me if/when ready to buy if I haven't posted as sold yet.

86TOYO2k17 07-27-2020 10:35 PM
Bump

StraightOuttaCanadaEh 07-28-2020 07:35 AM
Heh. I have the new Perrin ones and love the extra racket, especially while redlining it and/or with ac on, but I heard the Cusco might be even more extreme

86TOYO2k17 07-28-2020 08:58 AM
Quote:
Originally Posted by StraightOuttaCanadaEh (Post 3352629)
Heh. I have the new Perrin ones and love the extra racket, especially while redlining it and/or with ac on, but I heard the Cusco might be even more extreme
Perrin is more extreme then STI but Cusco is a little more extreme than Perrin.

I was thinking about going Perrin but read/saw too many stories of failures and the bushings melting because of how close it is to the header and it doesn't have a heat shield like the other designs. This turned me off from ever wanting to use them.

StraightOuttaCanadaEh 07-28-2020 10:17 AM
Quote:
Originally Posted by 86TOYO2k17 (Post 3352648)
Perrin is more extreme then STI but Cusco is a little more extreme than Perrin.

I was thinking about going Perrin but read/saw too many stories of failures and the bushings melting because of how close it is to the header and it doesn't have a heat shield like the other designs. This turned me off from ever wanting to use them.
IIRC that was the older design. They released the updated ones several months ago and they look very different

86TOYO2k17 07-28-2020 12:14 PM
Quote:
Originally Posted by StraightOuttaCanadaEh (Post 3352662)
IIRC that was the older design. They released the updated ones several months ago and they look very different
where are you seeing a new design change?
Do you have pictures of old vs new?
When i see the pics of the ones for sale on the websites they look identical to the pictures i see of the melted mounts on the forums.

DarkPira7e 07-28-2020 12:45 PM
Quote:
Originally Posted by 86TOYO2k17 (Post 3352688)
where are you seeing a new design change?
Do you have pictures of old vs new?
When i see the pics of the ones for sale on the websites they look identical to the pictures i see of the melted mounts on the forums.
I think he means the Perrin mounts.

Old style - https://emnotek.com/products/perrin-...yABEgLMF_D_BwE

New style - https://www.rallysportdirect.com/par...iABEgJn7vD_BwE

86TOYO2k17 07-28-2020 12:57 PM
Quote:
Originally Posted by DarkPira7e (Post 3352691)
Yeah we are talking about the Perrins,

I have seen those Perrin V2 mounts, I always thought they where an even more solid version. like 1 step down from actual solid mounts. and a much stiffer option than the V1, didn't realize it was the replacement for the V1, I wonder how they compare.

StraightOuttaCanadaEh 07-28-2020 02:52 PM
Quote:
Originally Posted by 86TOYO2k17 (Post 3352695)
Yeah we are talking about the Perrins,

I have seen those Perrin V2 mounts, I always thought they where an even more solid version. like 1 step down from actual solid mounts. and a much stiffer option than the V1, didn't realize it was the replacement for the V1, I wonder how they compare.
There are some comments on their instagram posts of people asking the same question... TBH I can't remember what the answer was lol


All times are GMT -4. The time now is 09:58 AM.
Page 1 of 2 1 2
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
User Alert System provided by Advanced User Tagging v3.3.0 (Lite) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.


Garage vBulletin Plugins by Drive Thru Online, Inc.