| CoolHandMoss |
06-09-2019 02:34 PM |
Magnaflow catback $200 (VA)
This is a Magnaflow catback exhaust for a BRZ / FR-S / 86. Last year this was on my car when I got rear ended. There is some cosmetic damage on the tips that isn't too noticeable. That is seen on the right outlet in the picture with the unit right side up. The real damage happened in the tight bend near the muffler, where the bend was "pinched" a bit and therefore is out of shape and has a hole in it. Fortunately, that exact piece is available by itself from Magnaflow. I bought the piece planning to fix it but I don't want to use it anymore. That piece alone was $100. So, all you have to do if you buy this is to get it mounted up under your car (as well as is possible considering some of the hangars won't line up due to the bend), bring it to a shop that does welding and have them cut the old one out and weld the new bend in, then you just finish fitting it to the remaining hangers. This probably won't cost more than $50 as that is what most exhaust shops charge for small jobs that take less than an hour. So, in conclusion, this exhaust does have some damage, but a new replacement for the specific part that is damaged is included with purchase so a repair at a welding shop would be very cheap and easy to make it almost like new. Other than that, this exhaust is in decent shape and will look good and sound good once fixed. I am asking $150, cash only, picked up. So even after getting it repaired, you would probably have no more than $200, $300 MAX, in this exhaust which sells for over $700 new, which I think is more than fair for someone willing to put in a little effort to save a lot of money. I will not ship this. I will not accept any payment other than cash. I am located in Virginia about an hour east of Richmond.
https://i.ibb.co/rtJ142X/20190609-140844.jpg
https://i.ibb.co/tLhj6NS/20190609-140913.jpg
https://i.ibb.co/3hpGLcr/20190609-140855.jpg
https://i.ibb.co/Fb3cJJ5/20190609-140849.jpg
https://i.ibb.co/h24fB69/20190609-142519.jpg |
