Dyno before my SC install
 

Well I've been out of the scene for awhile, but for good reasons. Finally decided to upgrade and purchase a Kraftwerks Supercharger kit and new wheels for this season. And also setting up the FRS for track this summer.

So before I install my SC my instructor said I could dyno my car before and after the install. So here are vids before. After vids will probably happen in 1 week, when I can use the dyno again.

Mods:
Perrin intake
Frankenstein exhaust
Borla UEL V1 header
UniChip Pretune Map

Mustang dyno

4th gear pull

[ame="https://www.youtube.com/watch?v=74nrP8OTiSM"]https://www.youtube.com/watch?v=74nrP8OTiSM[/ame]

Decided to also do a simulate 1/4 for fun haha

[ame="https://www.youtube.com/watch?v=TD2dO5cFBDE"]https://www.youtube.com/watch?v=TD2dO5cFBDE[/ame]

So have you already ordered the kraftwerks kit?


Sent from my iPhone using Tapatalk

yah, it's sitting in my living room. haha
Can't install til Saturday night or Sunday when I'm off work and no class.

Which kit? C30 or c38?


Sent from my iPhone using Tapatalk

C30 for now. Next year plans are for C38 with built motor

Nice! Another 86er doing the auto tech at spscc. Was that your only pull? Because that's the first time I've seen an 86 get a higher tq number than its hp lol

yah, I thought that was weird too. I did 3 pulls and they were all about the same. I think every car we did the torque was higher than the HP. I don't know if the dyno is reading things backwards but they haven't update the dyno software in awhile. Had to use an S2000 to get a close simulated reading.