15mm and 25mm wheel spacers
 

SOLD

I have 2 sets of spacers for sale.

First set is from B2autodesigns. 15mm thick, 5x100, hubcentric, used for about 12-15k miles. Nothing wrong with them. the nuts that hold the spacer to the hub are 17mm.

Second set is from Eibach. 25mm thick, 5x100, hubcentric, I bought these used, so I'm not sure exactly how many miles are on them, but they are still in perfect working order. The nuts that hold the spacer to the hub are 19mm.

In my opinion, this is a better setup than the 20/25mm combo.

Looking for $80 per set, or $150 for both sets shipped.

PM for any questions/concerns/comments/etc.

http://i1219.photobucket.com/albums/...psum9sxlrb.jpg
http://i1219.photobucket.com/albums/...ps5ujnyfeo.jpg

W/ Stock wheels

http://i1219.photobucket.com/albums/...psawv4stae.jpg

Still available

Do I just use the existing bolts to attach these spacers to the hub? Then the shown bolts are used to hold the stock wheels to the spacers?

Basically, is this compatible with stock wheels and stock lug nuts? I won't need anything else to push the wheels out 25mm?

thanks!

@SurfAndSand Exactly. Nothing else is needed. I would however, make sure that the wheels you plan to use have a cavity on the back side in between the lug holes in case the stock studs stick out past the spacer (OEM wheels have this).

Example of how it mounts:
http://www.elementauto.com/wp-conten.../06/spacer.jpg

Example of cavities:

http://kfdown.s.aliimg.com/kf/HTB1EJ...Xq6xXFXXXK.jpg

We're are you located

Sent from my SM-G935T using Tapatalk

I'll check my wheels this weekend.

Cincinnati, OH

pm'd

Sent from my VS987 using Tapatalk

sold