Can somebody post the stock injection timing and DI/PFI split maps?
 

I'm hoping to update my sticky thread. Toyota has a new generation D-4S system coming out pretty soon (if it hasn't already) and I'd like to have updated information.

I've got the open loop fueling target AFR table, the primary ignition map, and the cam phasing maps here. I forgot who posted them. I think OpenFlash or BRZedit can display injection angle. Also, any other stock maps that might be interesting please post legible screenshots below.

http://www.ft86club.com/forums/attac...1&d=1379540939

http://www.ft86club.com/forums/attac...1&d=1379540939

http://www.ft86club.com/forums/attac...1&d=1379540939

Here ya go. There are three maps (cold, warm and hot). They are all mapped identically in the stock tune (as well as in our current OTS tunes).

Thanks @shiv@vishnu ! I see "GDI firing angle" and fuel pressure targets on the left parameter tree. If it's not too much trouble, could you post screenshots of [at least some of] those too? Maybe GDi pressure target and warm condition firing angle at least?

Sure..

lol, i posted those fire angle tables and split tables in the sticky thread a long while ago.

http://www.ft86club.com/forums/showp...2&postcount=50

Ha I actually just realized that. But this is the first time I've seen the DI pressure targets.

yup, lots of good stuff, and lots more tables still left to define :drool:

Is this a turbo engine in your first post?