JUN GT SURGE TANK FOR FT86/BRZ
 

Hi guys recently discovered this beauty, anyone have any info or thoughts on this intake manifold seems promising able to "boost stock rpm7200 to 8000rpm".link here https://www.nengun.com/jun/gt-surge-tank-for-ft86-brz

http://www.junauto.co.jp/news/enews000206.html

Yeah found it also. Wonder what the HP gain is for a N/A.
Not a bad way to spend 351,000 JPY..

Even if hp gains are less, ability to rev higher is good by itself, due enabling of longer being in lower gears. Though this looks not so much enabling reving higher (which i guess would rather need extra stronger engine internals, like in some more boosted FI setups with rebuilt engines), but rather changing intake manifold design to skew optimisation to top rpm range (probably hurting low rpm/mid rpm performance). Am i wrong?

If you change the title to intake Jun Intake Manifold you may get a bit more interest in this thread.

The intake isn't the biggest problem for the rpm limiter; it's the valvetrain. No way in hell will I run 8k redline on stock springs.

The translation is very rough.

So, it's an intake manifold with tuned runner diameter and length for a volumetric efficiency peak at higher than stock RPM.

"Surge tank" is a poor translation.

If max VE, and max torque stays the same, but moves higher in the Rev range, the percent increase in horsepower will be equivalent to the percent increase in RPM for peak torque, because of how horsepower is calculated.

Getting this installed this week
 

Pics from my build thread
http://i63.tinypic.com/2wmkgar.png
http://i64.tinypic.com/2rcpjzl.png
http://i63.tinypic.com/24mc3rn.png
http://i66.tinypic.com/wahlsm.png
http://i63.tinypic.com/293eetz.png
http://i65.tinypic.com/28hdgyp.png
http://i65.tinypic.com/v7gxvd.png

Holy smokes Batman...4500 AUD for it. Thats turbo/SC money man! I really hope the gain is as high as the amount spent on it too. I mean if it would make say 15-25hp for that money it would be great but highly doubt it.

Keep us updated

Might be closer to $6k as I'm getting it installed and car retuned as well. Gonna put my TODA T/B on for dat throttle response :P
http://i66.tinypic.com/6yo850.jpg

I'll be very happy if I manage over 15hp tbh lol

Car already has *most* of the N/A and response mods you could think of
- HKS EL Headers, MOTIV overpipe, CBE will be changing out to HKS Single Racing Version(3in)
- HD Clutch, 10.5lbs flywheel
- CF driveshaft
- 4.556 final drive
- Lightest 18's you can get(TWS T66F)

at any rate, it will be a good supporting mod for when I go turbo later on

Nice! Would love to get a sound clip and footage of your car.

Sent from my HTC One_M8 using Tapatalk

Holy s*it dat price. In for results.

Needs more ACE header! ;) My mods are very similar to yours and I can say it is pretty quick

Installed, but requires tune
http://i66.tinypic.com/n1e45h.jpg

Very nice!