|
exactly what ive been waiting for! was it plug and play? cant tell from pics
|
Quote:
|
Quote:
I'm still waiting for my TRD license plate frame to arrive so I haven't finished tucking all the wires from the trunk, and fishing it through the car's rubber tubing. Have you done that? Any tips on how to do it easily? |
Looks great. Its too bad I didnt get a BeSpoke.
|
Will this work with the BRZ head unit?
|
Can u update what camera and install kit we need (link not working)
Thenittis.com |
I just installed mine today. The easiest way I found to get the wires through the trunk grommets was to unplug the wiring connector and pull the grommet loose from both the trunk and the body. That way you can straighten it out and push a straightened coat hanger through. Tape the camera wire to the coat hanger, and pull it back through the grommet, and untape. Simple.
|
Quote:
|
Quote:
|
Quote:
|
What hardware is required for this install? Thanks.
|
Quote:
- 10mm socket, socket wrench, extension - Very small flat head screw driver (the ones used to disassemble glasses) - Extra stereo wires (up to 7.5ft) - 1 x Ring Terminal for wire ground - Electric Tape - 1 x Male 14-16 Gauge Bullet Connector - Panel Removal Tool (or anything that can pry open the headunit (something thin and non abrasive) I used a plastic wax comb for surfboards.) |
Great write up.
|
| All times are GMT -4. The time now is 04:45 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
User Alert System provided by
Advanced User Tagging v3.3.0 (Lite) -
vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.