Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB

Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB (https://www.ft86club.com/forums/index.php)
-   Software Tuning (https://www.ft86club.com/forums/forumdisplay.php?f=88)
-   -   Look for the ZA1JA03N complete RomRaider Editor Definition definition file. (https://www.ft86club.com/forums/showthread.php?t=149948)

nerve86 05-31-2022 01:47 AM

Look for the ZA1JA03N complete RomRaider Editor Definition definition file.
 
1 Attachment(s)
Look for the ZA1JA03N complete RomRaider Editor Definition definition file.

I found ZA1JA03N my RomRaider Editor Definition is incomplete. Searched the forum and there is no, only ZA1JA01g.
thanks.
Attachment 212316

steve99 05-31-2022 06:15 PM

see here


https://www.ft86club.com/forums/show....php?p=3060187

nerve86 06-01-2022 07:04 AM

Quote:

Originally Posted by steve99 (Post 3526673)

Can I modify the calid in the xml of A01G to be 03N?

nerve86 06-01-2022 07:11 AM

Quote:

Originally Posted by steve99 (Post 3526673)

I want to edit the stock 03n and then use it for ecutek, not the 03n of oft based on 01g, can I directly modify calid=03n to use it?

nerve86 06-01-2022 07:41 AM

@steve99, I modified the xml calid=03n of A01G, opened the rom, and the table data displayed in it was wrong.

steve99 06-02-2022 05:33 AM

Are you using romraider and oft roms or ecutek ?


oft A03N will be based on a substitute rom and that will confuse ecutek



if ecutek use ecuteks editor if you want to edit genuine A03N roms

steve99 06-02-2022 05:38 AM

Quote:

Originally Posted by nerve86 (Post 3526744)
@steve99, I modified the xml calid=03n of A01G, opened the rom, and the table data displayed in it was wrong.


post up tje rom your trying to edit here ill jave a look

nerve86 06-02-2022 03:35 PM

Quote:

Originally Posted by steve99 (Post 3526972)
Are you using romraider and oft roms or ecutek ?


oft A03N will be based on a substitute rom and that will confuse ecutek



if ecutek use ecuteks editor if you want to edit genuine A03N roms

ecutek is missing some table definitions, such as overrun, I use romraider to edit the missing table in the stock ROM, and then use ecutek to edit it.

nerve86 06-02-2022 03:38 PM

Quote:

Originally Posted by nerve86 (Post 3527091)
ecutek is missing some table definitions, such as overrun, I use romraider to edit the missing table in the stock ROM, and then use ecutek to edit it.

But I can't find the complete definition file of the romraider for the stock rom of A03N.

nerve86 06-02-2022 03:52 PM

1 Attachment(s)
Quote:

Originally Posted by nerve86 (Post 3527095)
But I can't find the complete definition file of the romraider for the stock rom of A03N.

this is the file i use,
genuine A03N roms,and RR_ZA1JA03N.xml,Incomplete definition, like my first post.
Attachment 212367

nerve86 06-02-2022 04:24 PM

3 Attachment(s)
Quote:

Originally Posted by steve99 (Post 3526973)
post up tje rom your trying to edit here ill jave a look

After modifying RR_ZA1JA01G.xml, an error is displayed.
Attachment 212375
Attachment 212373
Attachment 212374

steve99 06-02-2022 07:49 PM

Quote:

Originally Posted by nerve86 (Post 3527101)
After modifying RR_ZA1JA01G.xml, an error is displayed.
Attachment 212375
Attachment 212373
Attachment 212374




OK my trick with definitions only works with OFT roms as their A03N tunes are actually based on A01G roms




you could just use A01G in your car as a substitute for the A03N rom.


There are no romraider definitions for genuine A03N roms


however easier to just use ecutek if you have it



Ecutek has all the tables you need in the A03N they are just called different names


The idle overun tables you want are called


"Ignition Timing Idle" there is about 6 tables defined more than romraider in A01G they are under Ignition timing folder in ecutek they are fully defined so just edit your A03N rom in ecutek

nerve86 06-03-2022 02:32 AM

Quote:

Originally Posted by steve99 (Post 3527137)
OK my trick with definitions only works with OFT roms as their A03N tunes are actually based on A01G roms




you could just use A01G in your car as a substitute for the A03N rom.


There are no romraider definitions for genuine A03N roms


however easier to just use ecutek if you have it



Ecutek has all the tables you need in the A03N they are just called different names


The idle overun tables you want are called


"Ignition Timing Idle" there is about 6 tables defined more than romraider in A01G they are under Ignition timing folder in ecutek they are fully defined so just edit your A03N rom in ecutek

Thank you for your reply!
ecutek prevents me from flashing the A01G.
If I flash the A01G with ecuflash, I will lose the ecutek license.
Is there a way to transplant the rr definition of A01G to 03N?

steve99 06-03-2022 07:42 AM

sent you private message


All times are GMT -4. The time now is 11:17 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
User Alert System provided by Advanced User Tagging v3.3.0 (Lite) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.


Garage vBulletin Plugins by Drive Thru Online, Inc.