Colours |
05-01-2021 04:26 PM |
Spec-D Wiring on a 10 Series FRS
I've been searching pretty much everywhere to find a good easy solution to be able to put my Spec-D Headlights which come with the base frs 6-Pin connector on my 10 Series which comes with the HID's from factory so it has the 8-Pin connector instead of the 6.
I've seen a lot of threads and I've been getting a lot of information and nothing that's really helped me fully. I'm not opposed to custom wiring aka De-pinning the connector on the stock headlight and then de-pinning the connector on the Spec-D and re-pinning it so that it has an 8-Pin on it. But I also really wouldn't mind a just straight up connector if it exists somewhere.
I've seen a few out there but I haven't really been sure which one I should get so if any of you 10 Series owners have purchased one and done this exact same thing and could help me out. It would be much appreciated. Thanks!
|