Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB
Page 1 of 14 1 234511 Last »
Show 40 post(s) from this thread on one page

Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB (https://www.ft86club.com/forums/index.php)
-   Forced Induction (https://www.ft86club.com/forums/forumdisplay.php?f=78)
-   -   Engine Blew! (https://www.ft86club.com/forums/showthread.php?t=145040)

Irace86.2.0 04-22-2021 10:36 AM
Engine Blew!
 
Pop, my engine went. I started laughing when it did because it was so obvious. There is oil on the ground and an obvious hole in the motor. I’ll probably be parting out what I can, and probably sell my supercharger if all looks well with it.

I was on it on the way to work. It was early, but I always drive aggressive. I hit a big bump during a pull, so I don’t know if that was part of it, but then it went.

I had new AMSOIL in it and 82k on the motor and maybe 25k on the supercharger with maybe 5k on the 75mm pulley. Pop! It is what it is. I might just sell the car for a loss and let someone else deal with it. We will see.

spcmafia 04-22-2021 10:41 AM
Quote:
Originally Posted by Irace86.2.0 (Post 3425995)
Pop, my engine went. I started laughing when it did because it was so obvious. There is oil on the ground and an obvious hole in the motor. I’ll probably be parting out what I can, and probably sell my supercharger if all looks well with it.

I was on it on the way to work. It was early, but I always drive aggressive. I hit a big bump during a pull, so I don’t know if that was part of it, but then it went.

I had new AMSOIL in it and 82k on the motor and maybe 25k on the supercharger with maybe 5k on the 75mm pulley. Pop! It is what it is. I might just sell the car for a loss and let someone else deal with it. We will see.

Damn, I'm sorry man. Best of luck.

Irace86.2.0 04-22-2021 10:46 AM
2 Attachment(s)
Isn’t this stuff suppose to be inside the engine?

FR-S2GT86 04-22-2021 11:31 AM
Ouch! I know you had a lot into that build. Sorry man. But at least I know now not to move up to the 75mm pulley.

You could always keep the twin and wait until there's a crate electric motor available.

p1l0t 04-22-2021 11:55 AM
Quote:
Originally Posted by FR-S2GT86 (Post 3426013)
Ouch! I know you had a lot into that build. Sorry man. But at least I know now not to move up to the 75mm pulley.

You could always keep the twin and wait until there's an crate electric motor available.
AWD twin w00t

Sent from my SM-G975U using Tapatalk

NoHaveMSG 04-22-2021 12:05 PM
Let go pretty hard to do that much damage. Did it make any noise before it went?

wbradley 04-22-2021 12:09 PM
It would be so much better if there could be a happy ending to this story. Good luck.

Lonewolf 04-22-2021 12:12 PM
Quote:
Originally Posted by Irace86.2.0 (Post 3425995)
Pop, my engine went. I started laughing when it did because it was so obvious. There is oil on the ground and an obvious hole in the motor. I’ll probably be parting out what I can, and probably sell my supercharger if all looks well with it.

I was on it on the way to work. It was early, but I always drive aggressive. I hit a big bump during a pull, so I don’t know if that was part of it, but then it went.

I had new AMSOIL in it and 82k on the motor and maybe 25k on the supercharger with maybe 5k on the 75mm pulley. Pop! It is what it is. I might just sell the car for a loss and let someone else deal with it. We will see.

I'm sorry to hear it...your build was amazing :(

DarkPira7e 04-22-2021 12:26 PM
What a shame :( glad the failure didn't also incur a safety consequence

NoHaveMSG 04-22-2021 12:30 PM
Quote:
Originally Posted by DarkPira7e (Post 3426045)
What a shame :( glad the failure didn't also incur a safety consequence
That is such a fear of mine. The way these engines let go makes me afraid of oil spray getting on the exhaust, there was one instance of this after a J02 recall failure that led to an engine bay fire.

Irace86.2.0 04-22-2021 12:39 PM
Quote:
Originally Posted by NoHaveMSG (Post 3426031)
Let go pretty hard to do that much damage. Did it make any noise before it went?
It made a bang when I hit the bump and then grinding like a spun rod and then clank, clank, clank as shit went through the block. It was pretty epic. Surprisingly, I had this sheepish look on my face like, “hehe, I pushed it too hard.” I’ll rip it apart tomorrow and see what is going on.

Irace86.2.0 04-22-2021 12:43 PM
Quote:
Originally Posted by NoHaveMSG (Post 3426048)
That is such a fear of mine. The way these engines let go makes me afraid of oil spray getting on the exhaust, there was one instance of this after a J02 recall failure that led to an engine bay fire.
There was steam from the coolant, but no loss of traction or anything crazy.

It is funny because I was probably a month or two away from converting it back to a CARB/stock condition for smog and then I was going to leave it that way for nursing school. Oh well, but I have plenty of cash. I will just need to figure out what I want to do. I might sell the supercharger or not. I might part stuff or not. I might sell it all as is or not. I might do a swap and have it NA or not. I’ll have to assess the damage and think about it.

Irace86.2.0 04-22-2021 12:45 PM
1 Attachment(s)
More carnage.

FR-S2GT86 04-22-2021 12:59 PM
Quote:
Originally Posted by Irace86.2.0 (Post 3426056)
More carnage.
I think you should change your user name to ICan'tRace86.2.0
:D


All times are GMT -4. The time now is 01:53 AM.
Page 1 of 14 1 234511 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
User Alert System provided by Advanced User Tagging v3.3.0 (Lite) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.


Garage vBulletin Plugins by Drive Thru Online, Inc.