Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB
Page 1 of 8 1 2345 Last »
Show 40 post(s) from this thread on one page

Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB (https://www.ft86club.com/forums/index.php)
-   BRZ First-Gen (2012+) -- General Topics (https://www.ft86club.com/forums/forumdisplay.php?f=23)
-   -   Things on your car that you have grown to like... (https://www.ft86club.com/forums/showthread.php?t=95430)

JD001 09-27-2015 01:27 PM
Things on your car that you have grown to like...
 

1. I used to dislike the standard rear wing, now I like.
2. I didn't like the standard rims but since installing my spacers I like.

Mike&Ike 09-27-2015 02:26 PM
At first I just wanted a premium brz with no fogs, seat heaters, and leather, but now I am fully satisfied that I got the limited model.

dbrandt01 09-27-2015 02:34 PM
Recently got rid of mine, but...

I originally hated that mine was a manual. After a week or so, I learned how to drive it. So I grown to like it :)

WhiteFRS69 09-27-2015 02:46 PM
i personally hated where the 3rd brake like was located, now im used to it, kinda helps block bright lights

ARTBRZ 09-27-2015 03:14 PM
I also hated and regretted getting the manual. Now I love it! Since I'm getting better at heal and toe downshift, I get excited every time I drive my car.

Fastbrew 09-27-2015 03:32 PM
I used to hate the torque dip but now I hardly notice it.

JD001 09-27-2015 03:38 PM
Quote:
Originally Posted by Fastbrew (Post 2402908)
I used to hate the torque dip but now I hardly notice it.
Kissed that demon goodbye with an UEL header...

LWAA 09-27-2015 03:40 PM
Quote:
Originally Posted by JD001 (Post 2402909)
Kissed that demon goodbye with an UEL header...

Tell me more please....


Sent from my iPhone

JD001 09-27-2015 03:52 PM
1 Attachment(s)
[QUOTE=LWAA;2402911]Tell me more please....

I was after the flat four burble and an UEL was the solution and this also gets rid of the dip. See Tomei UEL Expreme.

LWAA 09-27-2015 03:55 PM
[quote=JD001;2402918]
Quote:
Originally Posted by LWAA (Post 2402911)
Tell me more please....



I was after the flat four burble and an UEL was the solution and this also gets rid of the dip. See Tomei UEL Expreme.j

This: http://www.ft86speedfactory.com/tome...ader-1686.html
?


Sent from my iPhone

JD001 09-27-2015 03:59 PM
[quote=LWAA;2402919]
Quote:
Originally Posted by JD001 (Post 2402918)
Yes that's it. I also installed Milltek OP and a Berk fast cat.

LWAA 09-27-2015 04:07 PM
[quote=JD001;2402922]
Quote:
Originally Posted by LWAA (Post 2402919)



Yes that's it. I also installed Milltek OP and a Berk fast cat.

Did you do a tune too? I read that these need a tune after instal. I've no idea where I could get that done. Is it something you have to do yourself or can a local tuning shop do it?
As you can tell, I'm new to all this 😊


Sent from my iPhone

JD001 09-27-2015 04:17 PM
[quote=LWAA;2402926]
Quote:
Originally Posted by JD001 (Post 2402922)


Did you do a tune too? I read that these need a tune after instal. I've no idea where I could get that done. Is it something you have to do yourself or can a local tuning shop do it?
As you can tell, I'm new to all this 😊


Sent from my iPhone
I haven't had it tuned yet however in its current state it seems fine. It revs more freely.

ButeraFRS 09-27-2015 04:36 PM
[quote=JD001;2402928]
Quote:
Originally Posted by LWAA (Post 2402926)

I haven't had it tuned yet however in its current state it seems fine. It revs more freely.
Did you disconnect the battery at all or did it automatically get rid of the torque dip just on install?


All times are GMT -4. The time now is 03:35 AM.
Page 1 of 8 1 2345 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
User Alert System provided by Advanced User Tagging v3.3.0 (Lite) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.


Garage vBulletin Plugins by Drive Thru Online, Inc.