finally made the 180 mile trip to 2 different pep boys for my exhuast tips. think it was well worth the 5 hours it took! Then another 5 minutes to install them. made for a nice sunday road trip.

Sometimes it's good to be unique :P

I also put 335 miles on my car today.

There better be some pics!

Yup

http://www.ft86club.com/forums/showt...416#post303416

Delta Region autocross.

I just hardwired my V1 into the wiring for my auto dimming mirror and it powers up with the car and off with the car with the cord running up behind my mirror and into the headliner :happyanim:

- Installed the two underbody rubber plugs that my dealer forgot to install during PDI. You might find these in your glove box (like I did).
- Enabled the factory alarm system.
- Added 50ml of 2-stroke oil to fuel tank to kill the angry DI pump crickets.
- Ordered Perrin crankshaft pulley.
- Attempted to install Cusco drift button -- don't think that's going to happen. No instructions and our e-brake design doesn't allow for easy removal of stock button.

Can you post a link to the underbody plug thread along with what you mean about enabling the factory alarm? Thanks!

Drove 8 hours on interstates. Decided that's a little far for me.

Here's the link to the alarm thread : http://www.ft86club.com/forums/showthread.php?t=11049

As for the plugs, I remember seeing it here and checked my glove box for the baggy. The plugs go over the holes used to tie-down the car during shipping (I guess). They are about 6" from the side of the car on both sides and about 6 to 12" in front of the rear wheels.

Link: http://www.ft86club.com/forums/showthread.php?t=7204

I'll report how my cross country drive from CT to California....and then back to CT after a month goes :happy0180:

I drove to work today and then came home, does that count?! :D

Sill plugs = http://www.ft86club.com/forums/showthread.php?t=7204
Alarm activation = http://www.ft86club.com/forums/showthread.php?t=11049

edit... too slow

Btw if anyone with a auto dimming or mirror with homelink is interested in hardwiring their radar detecter I bought a cord from Invisicord (http://invisicord.com/osc2/catalog/p...products_id=31) and it's extremely easy to do! I will post pictures and a quick writeup in the DIY section tomorrow when it's light out.

I bought the 12" cable which I thought would be long enough but it barely reached to where I have my V1 mounted so I would recommend getting the 16" wire and tucking anything you don't need. I'll post pictures where my V1 is positioned as well so you can get an idea of the wire length needed.