|
Crashdummy's Release Series 1.0 build
Hello all!
I have spent many hrs lurking and reading your posts, thank you for all for knowledge that you have logged in here, hopefully I can make a few contributions too. :bonk: Back story Purchased "Nanako" on June 30th 2015, she has 2,656 fun miles on her now. Haven t experienced any of the crickets, or other stuff that ppl complain about. I can live with the small rattles and the road noise, just the electronic babysitters I can do without. The babysitters are no more! :) Most of the mods right now will be non performance type. I still need some time with the car and more input is need for me to decide which way to go. Edit: Have 12,000 Miles on her now and all is well. Edit: Have 17,500 Miles and purrs like a kitten Edit: 2/25/17 Have 30,009 Fun miles on her, 3 major road trips and no problems. :party0030: Edit: 5/9/17 Damn Racoon damage has been fixed. Took them 3 trys to paint the front splitter! :iono: Edit: 4/1/2018 Have 41,000 Miles on her. Interior redo is progress. Edit: 5/1/2019 Have 50,200 Miles on her. Interior and Sound System Complete. All Mods, for now, are done. Putting it how the RS 1.0 should have been from the factory. Here is the list of stuff I have accomplished::popcorn: K&N Air Filter - Done Greddy Hood Struts - Done Suntek Window Tint 18%/Sun Strip 18% - Done Paint TRD logos on Front Fender Garnish - Done Sound Tube delete - Done TRD rear bumper decal - Done Clutch Spring Removal - Done New Fog Light Stalk - Done Diode Dynamics Front Fog Lights - Done JDM Clear Side Marker Lights - Done Tint license plate lights - Done Hella Horns - Done Install Bug Screen in front of condenser - Done Toyota Front Arm Rest - Done Custom 8 Ball Shift Knob - Done Destroy Seat Belt Chime - Done Intec 3rd Brake Light Relocate - Done Echomaster Backup Camera - Done Gentex Auto-Dimming Mirror with Homelink, Compass & Temp - Done TRD Rims 18x7.5 Square - Done Michelin Pilot Super Sports Tires 245/35 ZR18 - Done Applied Clear Paint Protection film to the lower door panels, sils and a few other places - Done Custom Decepticon Emblems - Done TRD Aero Stabilizing Trunk Cover - Done Rear Arm Rest - Done Courtesy light in doors - Done Custom Ghost Lights in doors - Done Red LED Floor Lights - Done Partsam H11 LED Fog Lamps - Done Radium Dual Catch Cans - Done Radium Master Cylinder Brace - Done Hotchkis Strut Tower Brace - Done Custom Made 4ga Grounding Cables - Done Converted center console outlet to constant 12V power - Done Finished Rear Fog lamp install - Done TRD Door Stiffeners - Done Subaru Bolt Head Covers - Done Red LED trunk lights - Done Beatrush Rear Strut Tower Brace - Done SPC Rear Lower Control Arms - Done SPC Front Camber Bolts - Done Velox Front Tire Deflectors - Done JDM Underpanels - Done Stiffen Rear Bumper Cover - Done Velox Rear Under Spoiler - Done Rear Ghost Light - Done Amgain Rear Window Spoiler - Done Modellista Tail Light Covers - Done Alignment [COLOR=Blue]- Done Greddy Magnet Drain Plug - Done Beastronix 86Nanny PD + ABS - Done Velox Transmission Tunnel Cover with custom made 3rd panel - Done Mishmoto Oil Cooler - Done Greddy Air Intake Snorkel - Done Black Suede Headliner - Done Change All Red Stitching to Yellow - Done Silver pieces wrapped with Dark Grey Carbon Fiber wrap - Done Yellow Seat Belts - Done Infinity Kappa Perfect Front and Rear Speakers - Done Subaru Trunk Lid Trim Panel - Done Custom Door Sills - Done Katzkin Leather Kit - Done Custom Floor Mats - Done Pics Before: http://www.exoticautorestylers.com/i...0/p8100020.jpg http://www.exoticautorestylers.com/i...0/p8100021.jpg http://www.exoticautorestylers.com/i...0/p8100022.jpg http://www.exoticautorestylers.com/i...0/p8100024.jpg http://www.exoticautorestylers.com/i...0/p8100027.jpg http://www.exoticautorestylers.com/i...0/p8100028.jpg http://www.exoticautorestylers.com/i...0/p8100029.jpg http://www.exoticautorestylers.com/i...0/p8100036.jpg Pile of parts and more parts http://www.exoticautorestylers.com/i...0/p8110043.jpg http://www.exoticautorestylers.com/i...0/p8110048.jpg http://www.exoticautorestylers.com/i...0/p8110049.jpg TRD Rims 18x7.5 and Michelin Pilot Super Sport 245-35-ZR18 http://www.exoticautorestylers.com/i...0/p8110042.jpg Custom Made Center Caps http://www.exoticautorestylers.com/i...0/p7310005.jpg thats all for now, laterz |
are you building a track car?
|
Quote:
Doubtful since his post says most of his mods will be non performance. Sent from my iPhone using Tapatalk |
Quote:
|
Looks good so far.
|
sound deadening the doors maybe? i've been wanting to do that to mine...
|
Quote:
|
Quote:
I am wiring some custom ghost lights and the door Courtesy Lights |
Did you join the RS1 FB group? We have quite a bit of members now.
|
RS 1.0, the next day
Accomplished a few things::cheers:
Diode Dynamics Front Fog Lights - Done New Fog Light Stalk - Done JDM Clear Side Marker Lights - Done Hella horns - Done Clutch Spring Removal - Done Tint license plate lights - Done Front Fog lights According to the wiring diagrams, this FR-S is pre-wired for factory fog lamps all the way to the front end. :D Pin 4 White wire http://www.exoticautorestylers.com/i...0/p8110086.jpg Pin 3 Red with White stripe and pin 5 White with Red Strip at the BECM http://www.exoticautorestylers.com/i...0/p8110084.jpg Look for these connectors where the turn signals extension plugs plug into http://www.exoticautorestylers.com/i...0/p8110081.jpg http://www.exoticautorestylers.com/i...0/p8110080.jpg Pull them down, and 3 of the 4 pins are populated on the turn signal extension plug, on the car side, all 4th are there. The missing pin on the extension side is for the fog light. http://www.exoticautorestylers.com/i...0/p8110087.jpg http://www.exoticautorestylers.com/i...0/p8110088.jpg http://www.exoticautorestylers.com/i...0/p8110091.jpg http://www.exoticautorestylers.com/i...0/p8110092.jpg Thanks to my friends at International Auto in Sheboygan, I got a hold of the correct weather pack pins to put in the connector and also the H11 connectors http://www.exoticautorestylers.com/i...0/p8120003.jpg http://www.exoticautorestylers.com/i...0/p8120006.jpg http://www.exoticautorestylers.com/i...0/p8120008.jpg http://www.exoticautorestylers.com/i...0/p8120010.jpg Assemble? http://www.exoticautorestylers.com/i...0/p8120020.jpg http://www.exoticautorestylers.com/i...0/p8120023.jpg Installed the clear corners also http://www.exoticautorestylers.com/i...0/p8120014.jpg http://www.exoticautorestylers.com/i...0/p8120015.jpg http://www.exoticautorestylers.com/i...0/p8120017.jpg New Fog Light Stalk with Rear Fog light option: Steering wheel removal http://www.exoticautorestylers.com/i...0/p8110103.jpg Clock Spring removal MAKE SURE YOU DONT MOVE IT OR TWEEK IT TOO MUCH you can damage it! http://www.exoticautorestylers.com/i...0/p8110102.jpg Switch Assemblies removed http://www.exoticautorestylers.com/i...0/p8110104.jpg Push this tabe to remove the wiper switch http://www.exoticautorestylers.com/i...0/p8110108.jpg Push wiper switch into new for light stalk assembly http://www.exoticautorestylers.com/i...0/p8110109.jpg Install assembly back on to steering wheel column, and return clock spring assembly and mount steering wheel http://www.exoticautorestylers.com/i...0/p8110113.jpg Test? http://www.exoticautorestylers.com/i...0/p8110116.jpg http://www.exoticautorestylers.com/i...0/p8120011.jpg http://www.exoticautorestylers.com/i...0/p8120012.jpg http://www.exoticautorestylers.com/i...0/p8120013.jpg :party0030: Success! Must have been left ON in the BECM from the factory. In testing all the options, the fogs only come on when the headlights are ON, and go off when the brights are turn ON in either Flash mode or constant ON. Hmmmmm I like driving with my park lights and the fogs ON at the same time, without the head lights, Hmmmm, figure that out later... on to the rest! Hella Horns Removed the Stock horns http://www.exoticautorestylers.com/i...0/p8120024.jpg http://www.exoticautorestylers.com/i...0/p8120025.jpg Wired up http://www.exoticautorestylers.com/i...0/p8120026.jpg Made custom mounting brackets for them http://www.exoticautorestylers.com/i...0/p8120032.jpg Connected to factory horn wires http://www.exoticautorestylers.com/i...0/p8120033.jpg Horns and Fogs grounded to factory ground points http://www.exoticautorestylers.com/i...0/p8120035.jpg http://www.exoticautorestylers.com/i...0/p8120036.jpg Finished http://www.exoticautorestylers.com/i...0/p8120028.jpg Clutch Spring Removal Tools needed Hook Tool - your best friend and some times your worst nightmare Flat head screw driver - aka combination pry bar, paint scraper, scratch awe etc http://www.exoticautorestylers.com/i...0/p8130001.jpg Pull the C Clip off and then push in the clutch pedal, at the same time, forcefully pry the pin LEFT and it should pop out, release the clutch pedal. You may have to move the top around for it to get it all the way off. Once you get the top off, you can pull the C clip on the bottom and that pin Left too, and should pop out easly. I can tell a difference right a way without even driving it! We will have to see in a few days:burnrubber: http://www.exoticautorestylers.com/i...0/p8070015.jpg http://www.exoticautorestylers.com/i...0/p8070018.jpg http://www.exoticautorestylers.com/i...0/p8070016.jpg Tinted license plate lights They were too bight IMO, so why not darken them A lil VHT Night Shades does the tick! http://www.exoticautorestylers.com/i...0/p8110065.jpg http://www.exoticautorestylers.com/i...0/p8110063.jpg thats all for now, have a good one................ |
Quote:
will when I get a chance |
day after last
Didn't accomplish much today, but one thing:
Install Bug Screen in front of condenser To keep the bugs and rocks from damaging the A/C condenser, you put a screen infront of it. Have done this on all my cars, really does the trick. A bar of aluminum, some screen, glue and a strip of vinyl and wa-la, ready to install http://www.exoticautorestylers.com/i...0/p8130004.jpg A little epoxy trim adhesive on the bottom to bond it to the frame Not worried about it looking perfect on the bottom, it gets completely covered http://www.exoticautorestylers.com/i...0/p8130005.jpg more to come! |
The bug screen idea is a good one. Nice build so far
|
Quote:
|
Nice man! Is that the mustang 3rd brake light you are going to use to replace the oem one?
|
The black wheels are going to look killer...can't wait
|
The rest of the story
Didn't have a chance to post the progress over the last few days, so here is stuff that was done.
Echomaster Backup Camera - Done Gentex Auto-Dimming Mirror with Homelink Compass & Temp - Done Rear Fog Light - 1/2 Done INTEC 3rd Brake Light Relocate - Done TRD Aero Stabilizing Trunk Cover - Done Custom 8 Ball Shift Knob - Done Toyota Front Arm Rest - Done Apply Clear Paint Protection film to the lower door panels, sil plates and a few other places - Done Custom Decepticon Emblems - Done TRD Rims 18x7.5 Square - Done Michelin Pilot Super Sports Tires 245/35 ZR18 - Done Destroy Seat Belt Chime - Done Items to install at a later date: Rear Window Spoiler Rear Arm Rest Courtesy lights in doors Custom Ghost Lights in doors Echomaster Backup Camera http://www.exoticautorestylers.com/i...0/p8130009.jpg Follow indentation on the left side for where to drill the hole for the camera http://www.exoticautorestylers.com/i...0/p8130010.jpg Drill and moun the camera (sorry no pic) Mount the trunk garnish and run your wires to the back of the radio (I included the wire for the rear fog light in my run to the front) http://www.exoticautorestylers.com/i...0/p8140013.jpg http://www.exoticautorestylers.com/i...0/p8140016.jpg http://www.exoticautorestylers.com/i...0/p8140017.jpg http://www.exoticautorestylers.com/i...0/p8140018.jpg Head Unit Wiring http://www.exoticautorestylers.com/i...0/p8140005.jpg You must add a pin into slot 2 of the 28 Pin connector on the back of the radio and wire it to the reverse light circuit, IP J/B Connector 3D Pin 4, to kick on the monitor. The wires for the back-up camera get hooked up to Acc and Ground. I used the Blk/Lt Blue wire in pin 7 for Ground and Red pin 3 for Acc (connector is below the one on the left) http://www.exoticautorestylers.com/i...0/p8140022.jpg IP J/B Wiring http://www.exoticautorestylers.com/i...0/p8140019.jpg Plug in the connector they give you that has the Video plug http://www.exoticautorestylers.com/i...0/p8140004.jpg Assemble, turn Acc on and put in reverse to test Success! http://www.exoticautorestylers.com/i...0/p8140023.jpg Gentex Auto-Dimming Mirror with Homelink Compass & Temp Adaper install Best to use blue lock-tite on all 3 screws so they done vibrate loose http://www.exoticautorestylers.com/i...0/p8140024.jpg Mount the mirror and wire. Connector for ACC power and Ground is near the light in the headliner, reach up and to the right and you should get it. Its a three pin connecctor, wrapped in grey foam, 2 pins are ground ,1 pin ACC. Wire up the ground to the middle ground wire and the red and yellow to the ACC wire http://www.exoticautorestylers.com/i...0/p8140034.jpg http://www.exoticautorestylers.com/i...0/p8180112.jpg Rear Fog Light Have this half done, still have to do the LED in the cluster and wating for my pulse latching relay http://www.exoticautorestylers.com/i...0/p8150071.jpg http://www.exoticautorestylers.com/i...0/p8150073.jpg Test http://www.exoticautorestylers.com/i...0/p8150074.jpg INTEC 3rd Brake Light Relocate Pretty simple and straight forward http://www.exoticautorestylers.com/i...0/p8140038.jpg Remove rear deck, and grind off plactic welds to remove the factory 3rd brake light, then put on the supplied felt covers http://www.exoticautorestylers.com/i...0/p8140051.jpg http://www.exoticautorestylers.com/i...0/p8140052.jpg Clean the top inside of the window thoroughly, (if you have some adhesive promoter, you can put in on where the 2 sided tape will attach to the window) Pull out the plastic plug in the roof, line it up and peel off the 2 sided tape and stick. Run your wire down the pass side c pilar and under the rear deck to the 3rd brake light connector. http://www.exoticautorestylers.com/i...0/p8140053.jpg http://www.exoticautorestylers.com/i...0/p8140046.jpg http://www.exoticautorestylers.com/i...0/p8140042.jpg Done http://www.exoticautorestylers.com/i...0/p8140043.jpg TRD Aero Stabilizing Trunk Cover Glad I can read pretty pictures! lol instructions in Japanese! Not that hard to install, really like how it looks on the car!! http://www.exoticautorestylers.com/i...0/p8160087.jpg http://www.exoticautorestylers.com/i...0/p8160089.jpg http://www.exoticautorestylers.com/i...0/p8160092.jpg Custom 8 Ball Shift Knob A tradition that has been done to every manual trans car I have owned Drill and Tap the ball http://www.exoticautorestylers.com/i...0/p8180096.jpg Give the shifter a half inch hair cut, and re-cut the threads http://www.exoticautorestylers.com/i...0/p8180099.jpg Rollin http://www.exoticautorestylers.com/i...0/p8180105.jpg Front Arm Rest Got so involved in it that I didn't take any pics :( finished pics in next post!!! Laterz!:cheers: |
Quote:
|
Quote:
|
Love it!
|
Finished pics
Here are the finished pics as she sits right now.
I have a few more things that need to be done, I just dont have the parts yet or the time right now. Nanako........ http://www.exoticautorestylers.com/i...0/p8160078.jpg http://www.exoticautorestylers.com/i...0/p8180101.jpg http://www.exoticautorestylers.com/i...0/p8180104.jpg http://www.exoticautorestylers.com/i...0/p8160079.jpg http://www.exoticautorestylers.com/i...0/p8160080.jpg http://www.exoticautorestylers.com/i...0/p8210007.jpg http://www.exoticautorestylers.com/i...0/p8160081.jpg http://www.exoticautorestylers.com/i...0/p8210015.jpg Now to put some miles on her! :party0030: |
Finally had some time to get a few more things done!
Rear Arm Rest Courtesy light in doors Custom Ghost Lights in doors Red Floor Lights All the stuff laid out http://www.exoticautorestylers.com/i...926_122815.jpg Rear Arm Rest Pretty simple! remove seat and unbolt the 2 10mm bolts for the console and pull out the arm rest http://www.exoticautorestylers.com/i...926_185144.jpg The factory glue was not holding so I re-glued it http://www.exoticautorestylers.com/i...926_184646.jpg Installed http://www.exoticautorestylers.com/i...926_191701.jpg Courtesy Lights and Ghost lights B+ and Ground ran through door boot http://www.exoticautorestylers.com/i...926_132805.jpg http://www.exoticautorestylers.com/i...926_132821.jpg Courtesy Lights and Ghost Lights mounted and wired in the door panels http://www.exoticautorestylers.com/i...926_142858.jpg http://www.exoticautorestylers.com/i...926_151302.jpg Red LED floor lights for front and rear foot wells Put a few coats of VHT Nightshades to knock down the brightness http://www.exoticautorestylers.com/i...926_183435.jpg http://www.exoticautorestylers.com/i...926_184005.jpg Since there was nowhere to mount them, I made custom brackets for them Front Drivers From the Fuse box to the OBDII support bracket http://www.exoticautorestylers.com/i...929_175413.jpg Pass Front JB Welded this one to the 2 flat spots on the blower assembly http://www.exoticautorestylers.com/i...929_175505.jpg Drivers and Pass Rear Mounted both to the flap that runs down from the backrest to under the seat, zip ties do the trick. Then ran the wire along with the factory harness. http://www.exoticautorestylers.com/i...926_194251.jpg Finished! The set up: Each side is wired to the factory door switch at the BCM and diode isolated Drivers door opens - Ghost lights, Courtesy light come on there side only, all floor lights on Passenger door opens - Ghost lights, Courtesy light come on there side only, all floor lights on Park lights - All Floor lights come on http://www.exoticautorestylers.com/i...929_181606.jpg http://www.exoticautorestylers.com/i...929_181100.jpg http://www.exoticautorestylers.com/i...929_181123.jpg More things in the works....................soon! laterz |
some interesting things you're doing! keep it up!
|
loving your build, i got my rear fog working too [IMG]http://i1304.photobucket.com/albums/...psg8acwek9.jpg[/IMG]
|
Quote:
|
where did you get the Courtesy light from?
|
Quote:
Interested on how this is done. Sent from my iPhone using Tapatalk |
Quote:
Darkened them up with some VHT Nightshades |
Quote:
Got me started and then I figured out the rest. i just have not had the time to complete the relay wiring yet. |
Installed a set of these in my fog lamps while its parked for winter
now DRL/headlights match http://www.exoticautorestylers.com/i...0/pc060001.jpg http://www.exoticautorestylers.com/i...0/pb280009.jpg http://www.exoticautorestylers.com/i...0/pb280007.jpg http://www.exoticautorestylers.com/i...0/pb280001.jpg |
MMMM more parts on the way!
Radium Dual Catch Cans Radium Master Cyl Brace Hotchkis Strut Tower Brace JDM underpanels Beatrush Rear Strut Brace FT-86 SpeedFactory Rear Diffuser :D |
Parts!
:happyanim:
Next round of parts are in!! Radium Dual Catch Cans Radium Master Cylinder Brace Hotchkis Strut Tower Brace Custom Grounding Cables JDM Underpanels TRD Door Stiffners Beatrush Rear Strut Tower Brace SPC Lower Control Arms SPC Front Camber Bolts Subaru Trunk Lid Trim Panel Subaru Door Bolt Head Covers Greddy Magnet Drain Plug http://www.exoticautorestylers.com/i...0/p2260005.jpg Items that were installed today: Radium Dual Catch Cans Radium Master Cylinder Brace Hotchkis Strut Tower Brace Custom Grounding Cables Hotchkis Strut Tower Brace Custom Made Grounding Cables http://www.exoticautorestylers.com/i...0/p2260007.jpg Radium Dual Catch Cans http://www.exoticautorestylers.com/i...0/p2260008.jpg http://www.exoticautorestylers.com/i...0/p2260009.jpg Radium Master Cylinder Brace http://www.exoticautorestylers.com/i...0/p2260010.jpg More on Sunday! |
Some more goodies done:
Converted center console outlet to constant 12V power Finished Rear Fog lamp install TRD Door Stiffeners Bolt Head Covers Finished Rear Fog lamp install Had to wire up the pulse relay to work with the switch and the dash light http://www.exoticautorestylers.com/i...0/p2280003.jpg http://www.exoticautorestylers.com/i...0/p2280001.jpg TRD Door Stiffeners Panted the TRD Black to make it stand out http://www.exoticautorestylers.com/i...0/p2280012.jpg http://www.exoticautorestylers.com/i...0/p2280024.jpg http://www.exoticautorestylers.com/i...0/p2280027.jpg http://www.exoticautorestylers.com/i...0/p2280029.jpg http://www.exoticautorestylers.com/i...0/p2280030.jpg http://www.exoticautorestylers.com/i...0/p2280032.jpg Bolt Head Covers http://www.exoticautorestylers.com/i...0/p2290033.jpg http://www.exoticautorestylers.com/i...0/p2290034.jpg Till next! |
Keep rolling on.....
A few more installed today:
Red LED trunk lights Beatrush Rear Strut Tower Brace Installed Red Trunk lights in the trunk. Wired it up with a 3 position rocker switch so I can switch between the stock light, the Red LEDs or keep them both off. http://www.exoticautorestylers.com/i...0/p3010003.jpg Switch Mounted http://www.exoticautorestylers.com/i...0/p3010007.jpg http://www.exoticautorestylers.com/i...0/p3010006.jpg Beatrush Rear Tower Brace http://www.exoticautorestylers.com/i...0/p3010011.jpg Cant wait till I can drive it!!:thumbup: |
Long Day of installs
Had some time to get all that done yesterday and early this morn, thanks to a shit-snowstorm :cry: SPC Rear Lower Control Arms SPC Front Camber Bolts Velox Front Tire Deflectors JDM Underpanels Stiffen Rear Bumper Cover Velox Rear Under Spoiler Rear Ghost Light Amgain Rear Window Spoiler Modellista Tail Light Covers Alignment SPC Rear Lower Control Arms http://www.exoticautorestylers.com/i...0/p3120002.jpg http://www.exoticautorestylers.com/i...0/p3120004.jpg SPC Front Camber Bolts http://www.exoticautorestylers.com/i...0/p3130005.jpg http://www.exoticautorestylers.com/i...0/p3130012.jpg Velox Front Tire Deflectors http://www.exoticautorestylers.com/i...0/p3250004.jpg http://www.exoticautorestylers.com/i...0/p3250005.jpg JDM Underpanels Stiffen Rear Bumper Cover Velox Rear Under Spoiler http://www.exoticautorestylers.com/i...0/p3140041.jpg http://www.exoticautorestylers.com/i...0/p3140042.jpg Custom Brackets made to replace the plastic OEM ones http://www.exoticautorestylers.com/i...0/p3130014.jpg http://www.exoticautorestylers.com/i...0/p3130033.jpg http://www.exoticautorestylers.com/i...0/p3130034.jpg http://www.exoticautorestylers.com/i...0/p3130022.jpg http://www.exoticautorestylers.com/i...0/p3130024.jpg http://www.exoticautorestylers.com/i...0/p3140044.jpg http://www.exoticautorestylers.com/i...0/p3140037.jpg http://www.exoticautorestylers.com/i...0/p3140040.jpg Rear Ghost Light When the Trunk opens, it lights up http://www.exoticautorestylers.com/i...0/p3140053.jpg http://www.exoticautorestylers.com/i...0/p3140056.jpg Amgain Rear Window Spoiler http://www.exoticautorestylers.com/i...0/p3150058.jpg http://www.exoticautorestylers.com/i...0/p3150059.jpg http://www.exoticautorestylers.com/i...0/p3150060.jpg http://www.exoticautorestylers.com/i...0/p3150061.jpg Modellista Tail Light Covers http://www.exoticautorestylers.com/i...0/p3170062.jpg http://www.exoticautorestylers.com/i...0/p3170063.jpg Pics http://www.exoticautorestylers.com/i...0/p3170064.jpg http://www.exoticautorestylers.com/i...0/p3170065.jpg Alignment Specs Front Camber -1.6/-1.6 Front Toe +0.1/+0.2 Rear Camber -1.3/-1.3 Rear Toe +0.8/+0.8 Thats all for now, only a few more small things to do. |
Great job!!! Could you please tell me where you purchase the led headlights you put in as fog lights and what temp they are? Been trying to get my diode dynamics fogs to match my headlights too, have tried 4 or 5 bulbs haha
Thank you |
love this build
|
Quote:
6500K should be the temp, I did not use any of the colored lenses, just left them off |
Great, thank you! I will give those a try.
|
| All times are GMT -4. The time now is 12:28 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
User Alert System provided by
Advanced User Tagging v3.3.0 (Lite) -
vBulletin Mods & Addons Copyright © 2026 DragonByte Technologies Ltd.