Originally Posted by Fish (Post 257362)

You can't put a clear bra over the opticoat. It can't adhere to it. You would need to put the bra first, then opticoat.

Originally Posted by Reflections (Post 257793)

Incorrect. The opti-Coat doesn't prevent adhesion of the clear bra.

Chris@Optimum: Yes, it will be fine and cause no problems. You can use a solvent as usual to prep and go ahead as you normally do. Now, if you remove a clear bra that had OC applied up to, but not under the edges you will have to compound down the line and reapply to the area. You can also apply OC directly to the clearbra material to maintain a fresh new look that will not fade/yellow.

Source: http://www.detailingbliss.com/forum/...protection.htm

Originally Posted by Reflections (Post 257793)

Incorrect. The opti-Coat doesn't prevent adhesion of the clear bra.

Chris@Optimum: Yes, it will be fine and cause no problems. You can use a solvent as usual to prep and go ahead as you normally do. Now, if you remove a clear bra that had OC applied up to, but not under the edges you will have to compound down the line and reapply to the area. You can also apply OC directly to the clearbra material to maintain a fresh new look that will not fade/yellow.

Source: http://www.detailingbliss.com/forum/...protection.htm

Originally Posted by Reflections (Post 257793)

Incorrect. The opti-Coat doesn't prevent adhesion of the clear bra.

Chris@Optimum: Yes, it will be fine and cause no problems. You can use a solvent as usual to prep and go ahead as you normally do. Now, if you remove a clear bra that had OC applied up to, but not under the edges you will have to compound down the line and reapply to the area. You can also apply OC directly to the clearbra material to maintain a fresh new look that will not fade/yellow.

Source: http://www.detailingbliss.com/forum/...protection.htm

Originally Posted by bryansbestwax (Post 264923)

I dont disagree fully but i have had 2 cutomers have ahesion issues especially on smaller fender pieces. I would suggest after bra install to ne 100% sure. Thats just from experience. I have done about 70 opticoats and only 2 out of 30 had issues with the clearbra afterwards

Originally Posted by Hamza7 (Post 263197)

Wrong Wrong Wrong.

- Opti Coat
- Clear Bra
- Opti Coat
- Permanon Platinum 3-4/year

Don't try to anal rape the car in front, try to fall back or get a car in front of you if there's a dump truck carrying any type of debris...

That's how you avoid rock chips and even then there's a chance for them "attacking"...

Remember there's no shame in driving your car like a car but it never hurts to be extra pre-cautious.

Originally Posted by Aznek (Post 267051)

I spoke with Jeff at AudioHeaven today and he told me they cannot install it over Opti-coat, said it wouldn't stick...

Originally Posted by Hamza7 (Post 267074)

Do you happen to know what brand of wrap he is using?