1st FR-S TRD Kit fitted w/jdm lights
 

Here is our FRS fitted with the first full TRD Body kit including JDM Headlights in the US. Here are a few pics I took before all completed.

JDM SPECS:
TRD Front Lip
TRD Side Skirts
TRD Rear Bumper
Trd Trunk Lip Spoiler
Trd Shifter
Toyota 86 Headlights
Toyota 86 Clear Side markers
Toyota 86 Emblems



Attachment 8484

Attachment 8485

Attachment 8486

Attachment 8487

Attachment 8488

Attachment 8489

Attachment 8490

Attachment 8491

looks great!

Wow! I got to start saving my pennies now! Thanks for posting. Want to share the cost?

Spooge! I want those headlights!

What are the installs like for the sides and spoiler?

I can see for the sides that it has fasteners, but does it also have double side tape?

For the spoiler, does it have hole mounts or just pure double side tape? Also, can you take a picture of the top of the lip. I would like to know if it would cover any holes from the BRZ limited spoiler.

Yes, curious to know if installing the side skirts require any drilling. Moreover, if any of the parts including the rear lip spoiler require drilling.

The front lip required two holes inside the grill, the side skirts no drilling at all, the rear trunk lip had 2 small screw holes to be opened into the trunk an I decided I didn't want to use them. Everything else is installed with the supplied 3m tape already attached to the parts. Also, every part was a perfect fit. Also, the rear bumper cover has not been installed yet so I will update install on this piece once installed this week.

Were are the holes located in the trunk so I can let you know if they will get covered

the complete trd kit is around 2200, and about 1100 for each of the headlights plus shipping.

More important than the kit... how much were the headlights and where can you source them? Being for the JDM market, are they angled towards the left rather than the right?

Are the headlights aimed the wrong direction since they are jdm?

Full bodykit means you also have the rears right?

Didnt see a pic! Show us the rears as well


Also were the lights plug and play with US harness?

Write up please!

I have no idea since I don't have my BRZ just yet :sigh:

If you could post a top view of the trunk I could just do a visual to see if it would cover the are the limited spoiler sits. I'm assuming it would be a direct cover, but I'd rather not waste money and be wrong.

If anyone with a BRZ limited could chime in that would be helpful as well

I didnt have time to install the rear bumper piece and will post pics once installed. The JDM headlights use a diff harness plug, so I just rewired them to use with the oem US-SPEC plug and that was it.

Ok, I will get you some pics of that view.

I didnt have any problems with the angle on the lights. We can get you the lights if needed.

Are the led strip working? How about leveling?

Can you do a install write up for us?

Also noticed that you still have scion caps. Time to change it as well. Haha

Looks damn good! and a better reason why it should have been a Toyota here in the US in the first place.

There is just something about it that makes it look better with the Toyota emblems.

Are the body parts pre-painted?

I believe from another thread I read that they are painted either black or white or come unpainted.

wheels will be changed to some aftermarket. The led strips work perfectly. I decided not to order the leveling unit from japan as it its the same one used on the BRZ so i will be getting it here in the states from my local subaru dealer for much cheaper.

thats correct, the kit will come pre painted in only white, or black, and unpainted.

Looks pretty nice, but id grab some chrome bulbs to get rid of those egg yolks in the front.

That sucks, they should take a que from mazda. I'd like to do a lip spoiler, but having to spend a crap load on paint will probably change my mind.

Love the headlights might install them on my Frs

that rear lip is sex

i like the spoiler on this car - where can i buy it and how much ??

I dont like that it came with the front license plate holder. Wouldn't stop me from getting it though. Your car looks sexy. Could you do a write up of how you did led wiring?

Can you take some more pictures of the spoiler?? I can't decide if i want this or the five axis wing.

So u are saying u just taped the trunk spoiler without using the screws at all?

Is the spoiler sturdy??

Thx

prIce to shIp to AustralIa? Interested In skIrts and front bumper!

duckbill spoilers typically don't experience the kind of drag that other wings do. They function to aid latent rear detachment and smoothen out turbulence.

So 3m or any real sticky and strong adhesive is enough to mount those kinds of spoilers. They are not required to be bolted in.

I would bolt it in though to prevent it from being stolen but that's just me.

whats the price of the jdm headlights?

SU003-02512
Headlamp　1181.00

SU003-02514
Headlamp Leveling ECU 220.00

SU003-02513
Leveling Sensor 185.00

Can be found in this link
http://www.ft86club.com/forums/showthread.php?t=5584

wow one or pair? still wow

I did an edit that you may not have caught. That's just the lights that are set to JDM specs.

I think you can get the Subaru ECU and leveling sensor to save some money here in the USDM market at a Subaru dealer

is it the lighting or something... looks like the kit colour doesn't match :s which i hoped it did as it was stated it would :s

Color will vary from part to part unless they were painted on the same run.

The price of 1100 is per headlight. Meaning that 2 would cost 2200.

Think of the duckbills as an extension of the car whereas the gt or raised spoilers where the weight is further back and above the car need to be bolted down.

3m will do the job to keep the wing in place. Just think of it as a giant emblem.

Those pics are sexy indeed. I must resist the urge to spend all money's immediately after taking delivery...

I just want to verfiy and be sure.So this kit can order with the same whiteout paint that is used on the car right? Not a different shade of white right?