Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB

Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB (https://www.ft86club.com/forums/index.php)
-   Wheels | Tires | Spacers | Hub -- Sponsored by The Tire Rack (https://www.ft86club.com/forums/forumdisplay.php?f=24)
-   -   Brz On Works Vs Kfs 18x10 (https://www.ft86club.com/forums/showthread.php?t=81528)

Funk 01-28-2015 04:26 PM
Brz On Works Vs Kfs 18x10
 
These Are Works Vs Kf's 18x10 Et 15 , Let me know what yall think and yes i know im still on stock suspension

http://i87.photobucket.com/albums/k1...800e0fc3_1.jpg

http://i87.photobucket.com/albums/k1...psc915fc04.jpg

boucher 01-28-2015 04:36 PM
Man I'd have waited til you were low to post. It will look good though.

STV3 01-28-2015 04:37 PM
Quote:
Originally Posted by Funk (Post 2109228)
Let me know what yall think
Looks just about as bad as every other car on here with over sized wheels and tiny tires that don't fit properly.

Funk 01-28-2015 05:01 PM
Quote:
Originally Posted by STV3 (Post 2109240)
Looks just about as bad as every other car on here with over sized wheels and tiny tires that don't fit properly.
These are friend of mine wheels i wanted to test fit before i gave him an answer cause im thinking about buying them but id have to stance the shit out of my car to do it though so im still deciding

BRZZZZZZZZZZ 01-28-2015 05:27 PM
Looks terrible on stock suspension. Will look ok with suspension and camber/fender work.

8R6 01-28-2015 05:37 PM
those wheel/tire specs + stock suspension + stock fenders = VIP GT DONK

ghettofab.

Funk 01-28-2015 08:10 PM
i knew someone would say something lmao i have coilovers and etcc , but im going with Those Jdm Rocketbunny fenders that just bolt right on but ill need to run at least -5 camber all around and honestly they are growing on me

themajesticone 01-28-2015 08:21 PM
You're going to be VERY much slower - hope you are ok with that.

Funk 01-28-2015 08:46 PM
Quote:
Originally Posted by themajesticone (Post 2109570)
You're going to be VERY much slower - hope you are ok with that.
Yeah i understand that im buying these wheels for just looks then im getting another set for drifting and the track , it will be hard but im willing to do it , just to have fun with the car .

hanabie 01-28-2015 09:33 PM
sorry.. ewwwwww

2much 01-28-2015 10:02 PM
those tires are too small

D1cker 01-28-2015 10:51 PM
you need a rocket bunny kit if you're going to run those.

Funk 01-29-2015 05:07 AM
well you can rocket bunny or you can choose not to and just have about -6 camber all around and be alright but like i said just experimenting

vividracing 01-29-2015 02:14 PM
I have always been a KF fan :) seems like there is huge plans for the car.

adamg 01-29-2015 02:25 PM
dont listen to anyone on here. they will look great, youll need atleast -6 all around and possibly roll/pull fenders. rb is not necessary.

and for everyone else. he was obviously not going to run these wheels on stock suspension, and no shit it will be "slower" but by how much 2hp for slightly heaver wheels.. jesus people they are daily wheels and no the tires are not to small, they are a decent size

STV3 01-29-2015 03:06 PM
Quote:
Originally Posted by adamg (Post 2110488)
dont listen to anyone on here. they will look great, youll need atleast -6 all around and possibly roll/pull fenders. rb is not necessary.

and for everyone else. he was obviously not going to run these wheels on stock suspension, and no shit it will be "slower" but by how much 2hp for slightly heaver wheels.. jesus people they are daily wheels and no the tires are not to small, they are a decent size
Oh yeah they're a decent size... until he's casually driving around a curve one day on the highway at 60 mph and accidentally hits a pot hole and the tire pops off the bead because he is running 50 psi in his overly stretched tires.

He'll keep control of the car though right?? oh wait no he's running a retarded amount of camber, because you know "stance bro", and he only has about 4" of a contact patch with the road on only 3 tires now and spins out of control and takes out 3 other cars.

Yeah stance bro.

Yeah I know people run cars like this and never get into accidents. There are also a lot of people that smoke all their life and never get cancer. Still doesn't make it a good idea...

Besides the fact that the car will look like complete ass...

adamg 01-29-2015 04:03 PM
Quote:
Originally Posted by STV3 (Post 2110541)
Oh yeah they're a decent size... until he's casually driving around a curve one day on the highway at 60 mph and accidentally hits a pot hole and the tire pops off the bead because he is running 50 psi in his overly stretched tires.

He'll keep control of the car though right?? oh wait no he's running a retarded amount of camber, because you know "stance bro", and he only has about 4" of a contact patch with the road on only 3 tires now and spins out of control and takes out 3 other cars.

Yeah stance bro.

Yeah I know people run cars like this and never get into accidents. There are also a lot of people that smoke all their life and never get cancer. Still doesn't make it a good idea...

Besides the fact that the car will look like complete ass...
1. Have you ever seen that happen? i forgot wheels had bead locks and its fucking 2015, tires dont come off that easy

2. 18x10 wheel with maybe 8-9" of contact patch after stretch and then maybe 7-8" after -6 degrees of camber. still the same amount as factory wheels

3. butthurt?

4. Yea it looks horrible, its on stock suspension.

Funk 01-29-2015 06:12 PM
Quote:
Originally Posted by adamg (Post 2110622)
1. Have you ever seen that happen? i forgot wheels had bead locks and its fucking 2015, tires dont come off that easy

2. 18x10 wheel with maybe 8-9" of contact patch after stretch and then maybe 7-8" after -6 degrees of camber. still the same amount as factory wheels

3. butthurt?

4. Yea it looks horrible, its on stock suspension.
you are right

TylerLieberman 01-30-2015 12:34 PM
Quote:
Originally Posted by STV3 (Post 2110541)
Oh yeah they're a decent size... until he's casually driving around a curve one day on the highway at 60 mph and accidentally hits a pot hole and the tire pops off the bead because he is running 50 psi in his overly stretched tires.

He'll keep control of the car though right?? oh wait no he's running a retarded amount of camber, because you know "stance bro", and he only has about 4" of a contact patch with the road on only 3 tires now and spins out of control and takes out 3 other cars.

Yeah stance bro.

Yeah I know people run cars like this and never get into accidents. There are also a lot of people that smoke all their life and never get cancer. Still doesn't make it a good idea...

Besides the fact that the car will look like complete ass...
Really? I didn't know running higher tire pressure would cause a tire to de bead when it hits a bump lol.


Wtf did I just read?

Bergen23 01-30-2015 12:55 PM
Doesn't look great at that height. But with a drop it could look ok.

Also, those "JDM bolt on RB fenders" are just knock off junk.

Funk 01-30-2015 04:51 PM
Quote:
Originally Posted by Bergen23 (Post 2111826)
Doesn't look great at that height. But with a drop it could look ok.

Also, those "JDM bolt on RB fenders" are just knock off junk.
im talking about to Todoreki fenders that are like 1300 bucks or the victory function fenders

Bergen23 01-30-2015 05:46 PM
Quote:
Originally Posted by Funk (Post 2112160)
im talking about to Todoreki fenders that are like 1300 bucks or the victory function fenders
So what's up this post? Specifically the bolded part... As the Rocket Bunny "bolt on fenders" are FRP garbage that will NOT line up with your front bumper, unless you get the extra piece that goes on your bumper before the fender flair starts. And you can only get that by getting the entire fender piece. The Todoroki fenders and VF fenders are a different kind of fender from what you mentioned. I believe you're referring to these: http://www.ebay.ca/itm/FRP-Rocket-Bu...5387dd&vxp=mtr

Quote:
Originally Posted by Funk (Post 2109562)
i knew someone would say something lmao i have coilovers and etcc , but im going with Those Jdm Rocketbunny fenders that just bolt right on but ill need to run at least -5 camber all around and honestly they are growing on me

Funk 01-31-2015 01:22 AM
Quote:
Originally Posted by Bergen23 (Post 2112240)
So what's up this post? Specifically the bolded part... As the Rocket Bunny "bolt on fenders" are FRP garbage that will NOT line up with your front bumper, unless you get the extra piece that goes on your bumper before the fender flair starts. And you can only get that by getting the entire fender piece. The Todoroki fenders and VF fenders are a different kind of fender from what you mentioned. I believe you're referring to these: http://www.ebay.ca/itm/FRP-Rocket-Bu...5387dd&vxp=mtr
ohh hell no not that nothing from ebay that is body wise is going on my car everything im getting is Authentic , i just didnt say it the right way and well i was see Ryan turek'd videos and he bought A regular fender with the rocket bunny flare already on it i was looking for it but i couldnt find it guess its only special for him

Bergen23 01-31-2015 03:57 AM
Quote:
Originally Posted by Funk (Post 2112755)
ohh hell no not that nothing from ebay that is body wise is going on my car everything im getting is Authentic , i just didnt say it the right way and well i was see Ryan turek'd videos and he bought A regular fender with the rocket bunny flare already on it i was looking for it but i couldnt find it guess its only special for him
Maybe I'm too drunk for forums, but fuck bro. Learn some grammar.

Funk 02-01-2015 07:36 AM
sorry grammar isnt that good , anywho i hope this helps anyone looking

ckkone 02-01-2015 08:50 AM
Looks really bad, thanks for posting.

Funk 02-02-2015 08:54 PM
Quote:
Originally Posted by ckkone (Post 2113791)
Looks really bad, thanks for posting.
damn i mean hate all you want , like i said its on stock everything its a test fit . half the people on here hate but yet i clearly stated everything in the first post


All times are GMT -4. The time now is 10:04 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
User Alert System provided by Advanced User Tagging v3.3.0 (Lite) - vBulletin Mods & Addons Copyright © 2026 DragonByte Technologies Ltd.


Garage vBulletin Plugins by Drive Thru Online, Inc.