KWV3 + Stock Wheels
 

Anybody here have this set up? I picked up some KWV3s this weekend and plan on using them with my stock wheels for a couple months and was just curious on what sized spacers I should get. :bonk:

20mm (front) / 25mm (rear) is a good set up that i've been seeing when i searched but I've only been seeing that setup for the stock height.

Can anyone help me out? Thanks!

Why do you need spacers with coilovers? There's no clearance issues unless you are going for looks-only.

-alex

I wanted to make my stock wheels more flush but not rub.

You have stock wheels, there is no way you would rub!

I always thought spacers were more for looks?
That or you have a bbk.

I'm on RCE yellows, about a 20mm drop. I'm running 20mm front and 25mm rear and they look perfect. I don't have any pictures at a decent angle to show it but 20/25 is the right size.

Awesome! Any recommended brand on spacers?

http://i174.photobucket.com/albums/w...ps30541825.jpg

EDIT: KW V3 coilovers, 20mm front, 25mm rear B2 spacers.

Looks NICE^

Don't know what suspension or what size spacers but this is what to aim for, I am :)

Attachment 96121

Same here! looks super clean!

Thanks for the input guys! Finally had time to do the install yesterday. I ended up picking up some H&R spacers and went with 20mm & 25mm. Here is how it turned out. :thanks:

http://i61.tinypic.com/30t5dvt.jpg

What do you guys think!! :w00t:

I think we need more pics, looks great :clap:

Definitely looks good!

looks good. japanese manufactures need to start making more cars look like audis and bmws stock wheel fitment.

Ill try to take more pics! Thanks guys

Here's more pictures guys, sorry for the shitty angles. :bonk:

http://i60.tinypic.com/2eqc0p1.jpg


http://i60.tinypic.com/2s6kguw.jpg


http://i60.tinypic.com/ofzar.jpg

How low are you? I installed my kwv3's without adjusting the ride height then found out they were set from the factory to be lower than the designated safe-zone (20mm - 50mm) for packaging purposes. I cracked the dust cover, or whatever it's called, during my test drive after install. Your ride sits just like mine before I raised the car to a safe height.

Dust cover? im not sure what part youre talking about

I never measured it, I actually bought them used and just installed them to whatever the height the prevoius owner set them to. But the back is a 1 finger gap and the front is like half a finger gap. I've been meaning the adjust the height.

Here's a pic of another member's cracked dust cap. It's the black cover below the bump stops.
http://www.ft86club.com/forums/attac...1&d=1373945503

Mine don't have that on there lol The previous owner must have taken them off.