![]() |
Sharkfin options
Besides the TRD and Beatsonic, what other antenna options are there for plug and play (no modification)?
|
The 2015 models come with sharkins so you could replace the entire antenna assembly. Haven't been able to get a part number though as I don't think the dealers have an updated 2015 parts catalog yet.
|
Quote:
|
Quote:
Just look in the FRS or BRZ specific forums at the thread on 2015 models and you'll see pics that people have posted of their cars. Or just go to your local Scion/Subie dealer and look at it in person. |
MY15 shark fin diagram here - the top where it saw ZN6 A,B are for original cars while the below diagram where it says ZN6 C is for the MY15 car. Part numbers are included although as you will see if you read further the part numbers may vary from country to country http://iforce.co.nz/i/4rfvhbid.5mo.png
As mentioned it replaces the whole antenna assembly so looks like you need to remove roof liner to get to bolt that holds it. As this part is the antenna assembly and amplifier it is very expensive. Part number here in New Zealand is SU003-05515 for the shark fin and base. You will see the diagram part numbers for the base are the same so you'd need to be sure you're ordering the new version "C" rather than version "A, B". The wiring has different part numbers from the MY14 and earlier models with three parts being SU003-02659, SU003-02661 and SU003-02658 while the MY15 shark fin has the part numbers for the three wiring sections as SU003-05230, SU003-05232 and SU003-05229 Your part numbers may vary. Personally I have tried four shark fins being beatsonic, modellista, a cheap ebay one and the genuine TRD fin. All degrade the FM reception. The TRD one (even though I have full TRD car) is ugly as sin. Far too big and is more an entire shark rather than just the fin! The beatsonic is nice but I think the modellista is the nicest I have tried. I am now using internet radio so don't care about reception so have the modellista one back on - it's here https://www.japanparts.com/parts/detail/41005 http://iforce.co.nz/i/z2nzxvm1.r1k.jpg I have seen the 2015 fin in the flesh and it looks nice. Personally I prefer the shape of the modellista more but as it still needs to fit over the standard antenna base the MY15 one is smaller. Pics of MY2015 fin I saw here http://iforce.co.nz/i/i2ur3r5o.mwe.jpg http://iforce.co.nz/i/oc3vv4y5.qnu.jpg |
While we are on this topic, does anyone happen to know the part number for the BRZ sharkfin?
|
http://www.ft86club.com/forums/<iframe src=
<iframe src="https://onedrive.live.com/embed?cid=...D2Bm8YZSKyROdc" width="320" height="180" frameborder="0" scrolling="no"></iframe>Part number for the BRZ fin is 86321CA610(V2) - V2 is the color code. Unlike the beatsonic and other fins this is not a shell it is a full replacement and it actually made my SiriusXM and FM reception better over the stock R/C antenna. |
Quote:
Also, what did it cost? |
Quote:
|
I hope someone else comes up with at least one more option. I have the beatsonic WRB shark fin but i swear the color is off a shade.
|
http://i.imgur.com/ZmPrhUm.jpghttp://imgur.com/ZmPrhUm
I may be biased but I like my Perrin shorty. :) Nice and subtle, super cheap. |
Quote:
|
Quote:
https://www.japanparts.com/parts/detail/42987 and http://global.rakuten.com/en/store/s.../item/rubr053/ |
Quote:
|
Quote:
Yeah it's going to have to be a USDM part for a direct replacement, 86321CA610 is the best thing I can think of based on the post earlier but I can't seem to find anything with that part number via Google. It especially sucks for us SWP and classic WRB owners as we're going to have to get it custom painted for an exact color match as they aren't 2015MY colors. They probably don't even come unpainted either. |
Quote:
|
Quote:
|
OK. . found a link for all the antenna stays. . no clue on which color each one is though.
http://www.xtremevwparts.com/?p=cata...str=86321CA610 I sent an email to ask them if they could tell me which one was DGM at least. Will post back if I get a response. |
Well based on what we got so far:
86321CA610W6 - Unpainted 86321CA610V2 - Crystal Black Silica (D4S) 86321CA610B5 - ??? 86321CA610E4 - ??? 86321CA610EN - ??? 86321CA610RL - ??? 86321CA610TQ - ??? I'll see if I can match it up with any color codes and update this post. Since MY2015 has 6 colors and there are 7 options, it makes sense for one of them to be unpainted. Unmatched are: WR Blue Pearl Crystal White Pearl Dark Gray Metallic Lightning Red Ice Silver Metallic |
We have Modellista one C7P (Painted version) in stock.
http://nigel-jdmparts.com/toyota-86-...-sport-antenna |
Found this is off the Retail Accessory Guide effective May 14, 2014 for the Australian market. Link here: http://www.subarutoowong.com.au/broc...ccessories.pdf
WU - Satin White Pearl V2 - Crystal Black Silica B5 - Galaxy Blue Silica S3 - Sterling Silver Metallic EN - Dark Gray Metallic RL - Lightning Red PG - WR Blue Mica TQ - Ice Silver Metallic E4 - WR Blue Pearl So the updated list looks like this: 86321CA610W6 - Unpainted 86321CA610V2 - Crystal Black Silica (D4S) 86321CA610B5 - Galaxy Blue Silica 86321CA610E4 - WR Blue Pearl 86321CA610EN - Dark Gray Metallic 86321CA610RL - Lightning Red 86321CA610TQ - Ice Silver Metalli |
If that's the case, W6 has to be Crystal White Pearl then. I thought Galaxy Blue Silica was discontinued? But I do trust the that the B5 paint code is in fact GBS but then it makes me wonder why there's no antenna for Satin White Pearl (WU)... Anyways, I guess the final result is:
86321CA610W6 - Crystal White Pearl (K1X) 86321CA610V2 - Crystal Black Silica (D4S) 86321CA610B5 - Galaxy Blue Silica (Now known as Galaxy Blue Pearl) (E8H) 86321CA610E4 - World Rally Blue Pearl (K7X) 86321CA610EN - Dark Gray Metallic (61K) 86321CA610RL - Lightning Red (C7P) 86321CA610TQ - Ice Silver Metallic (G1U) EDIT: Just realized that all of the 7 colors above are available for the 2015 WRX, which leads me to believe that the color options are specific to the WRX. This is why GBS is available even on a 2015MY part versus SWP. I believe the WRX and BRZ share a common part number for the antennas, so for those who have a GBS BRZ wanting to have a factory paint matched shark fin antenna, you guys lucked out. |
|
I should have mentioned in my original post that in order to get the part number I had to take the VIN number from a Crystal White Pearl BRZ, Blue series to be exact. The parts guy told me its unpainted but it could also very well be White like you suggest.
Quote:
|
Quote:
Quote:
Quote:
|
Quote:
|
Modellista is the best shark fin but goddamn 260+ dollars for a fucking shark fin? jeesus >=(
|
Quote:
Quote:
|
| All times are GMT -4. The time now is 05:52 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
User Alert System provided by
Advanced User Tagging v3.3.0 (Lite) -
vBulletin Mods & Addons Copyright © 2026 DragonByte Technologies Ltd.