Where to buy 17x9.5 +38 RPF1
 

I've searched the forums, Googled and apologize for asking this if it has already been asked..

I'm looking for 17x9.5 RPF1's 5x100 +38. I know they sell them and i'm not particular on color, i'll get them stripped and powder coated.

Thank you.

17x9.5 does not come in 5x100 from Enkei. It will only be possible if a vendor ordered 40 pieces in bulk.

it does come in 5x100 and 17x9.5.. i read a thread back when I was just lurking that said they are available but only in silver

17x9.5 5x100 et38

sadly though I've searched and searched and can't find it!!

As Vivid said 17x9.5 5x100 is a VERY special size and not something that has been made by Enkei in a very long time. We stock 17x9 +35 in silver if you are still hunting for something close.

A 17x9.5 +38 would have some fitment issues on the FRS/BRZ anyway.

on coils with a 1" drop their would be issues?

That wheel is our exclusive and is currently on order. It is special production run as are most of the wide 5x100 enkei fitments

http://www.autornd.com/product-p/rpf...5100-38-si.htm

Might take 4 months to get here as the order was recently placed.

Currently the RP03 is in stock in that fitment in SBC Finish. It's pretty awesome and concave.

http://cdn3.volusion.com/fnjtj.shffw...jpg?1380737499

We are new here and hope this answers your question without over stepping any forum policies. We are an authorized vendor here.

No problems at all on the 17x9 +35. Simple, flush, and effective.

I have a set that I've been possibly thinking about selling. If you are local in So Cal and the price is right I may have what you are looking for.

I'm about as local to socal as i am new york city :-P but if they don't fit like ft86sf said i'd have to pass :-(

Care to explain? Are you referring to fitment issues with the suspension or the fenders?

Considering I am running 18X9.5 squared on coils, I would say they fit just fine....

and yes, the RP03's in SBC on 18X9.5 look sick.

http://www.ft86club.com/forums/showp...11&postcount=1

to answer all the nay sayers :P

There are tons in stock right now. As seen here.

You would need coilovers to fit these due to backspacing issues up front.

http://www.autornd.com/product-p/rpf...5100-38-si.htm

Hi, just saw your thread. I own a set of 17x9.5 +38 RPF1's. Im not selling just relating fitment issues they're talking about.
Yes, it'll rub the shock if youre stock. Im lowered on Fortune Auto 500's with 20mm body thread left on the rear and 25mm left in the front. Also I have Stance rear LCA.

NOW, as fitment. Theyre perfect. At least in my opinion. I'm running 245/40-17 YK580 since I'm just looking for the best bang for my buck at the time. But there is no rubbing issues. My fender is approximately 24 1/4 inches from the ground all around. and yeah. idk what else. just bugged me how they said there would be fitment issues when there isnt. just let me know if you want pics.

Oh, also, im -2 camber front and -1.5 rear, i want to zero out the rear camber but I couldnt without buying shorter toe arms aka aftermarket. but yes. they fit, and yes theyre rare, I got them from a guy from craigslist that was selling them for auto RnD for 1100.

Are these particular RPF1 rims still being produced?
I checked various vendors including the one mentioned in this thread but they are all out of stock.

Yeah they're a little hard to come by, why not just go 17x9?


Sent from my iPhone using Tapatalk

Read the second post. That is the only way get them.

You'll likely only find them on the used market unless some vendor puts in an order for them, which is unlikely due to the very aggressive fitment.

Did you try to call the site that listed them earlier in this thread? Their web site shows them in stock. :iono:

I already have the 17"x9" RPF1.
I'd like to try a wider Avon slick and this one requires a width of at least 9.5" (I think the lighter CSP Miatas in the US are even running up to 275 wide racing tires). Since I need more wheels anyway (to have more flexibility depending on weather, course and tire wear/age) I think an additional but slightly wider set makes more sense.

I've contacted the vendor which supposedly has them stocked and he said that he sold the last set (a few weeks ago and also said to get the RP03 instead, which is more expensive, heavier and somewhat flashy with that finish).