Nameless Overpipe/Front Pipe VIDEOS RESONATED OR NON-RESONATED POST HERE !!
 

hey guys i know this nameless piece has shown to show some pretty big gains on the dyno from what i saw it was 10-16HP in different ranges of the RPM ... my question is either to go Resonated or Non Resonated. i have a Takeda CAI and a GReddy SP Elite exhaust Axleback and just looking for a deeper rumble and not a shitty ricey sound that some cars have from just over-doing it. i cant find any videos of these so if you all can help i would much appreciate it.
What i want: deeper rumble sound
What i dont want: Drone and Ricey Sound

PLEASE POST ANY VIDEOS WITH THESE SYSTEMS ON THE CAR. if you personally have this and everything else is stock that would be awesome to compare to our pieces already to see how loud it will actually sound

I have the frontpipe + overpipe combo with the high flow cat and helmholtz resonator (And their axleback). Definitely adds a deeper grumble when I compared side to side with another car with just the Nameless Axleback. No drone! I have never heard the non-resonated though but i'd say get the resonator if you don't want ricey.

Sorry, I haven't taken a video of it but videos never really do it justice. Sound is pure sex.

edit: And here's a pic from my journal!

http://i.imgur.com/rXKT3x7.jpg

RESONATED /End Thread

awesome ill get the resonated thank you

I had it resonated and had a fellow local owner had it un-resonated. The difference between the two is the resonator makes it growl deeper, so definitely go for it.

awesome ill be sure to make a vidoe

Does the Nameless Overpipe/Front pipe include the actual overpipe? Looking at the picture it just looks like a Front Pipe.

it bolts directly to the header and goes back to the stock mid piping...instead of two stock pieces it is one.

I can post a vid of my unresonated one later today. It definitely is ricer expecially when the engine is cold. But its fine with me I like sounding like a glass pack occasionally

This car sounds like crap on many exhausts cold start. Sounds great after that.

it is actually the overripe and front pipe in one… they welded the two together which is actually pretty smart and i like that concept. its definitely cheaper when you think about it also. I'm getting mine from Prime Motoring for a really nice price and cheap installation. I'm getting the Catted Resonated version to go along with my AFE CAI and GReddy SP Elite axle back hopefully it sounds like a pornstar getting rammed from behind :paddle:

Yeah I feel a little bad in the morning cause it sounds like a rhinoceros is fighting a Semi truck when I start up definitely loud enough to wake up a few people

I cold start my 3" with the JDL UEL at 6 am every morning. I'm sure I wake up many people. You can quickly end the cold start by moving though. I try not to be a total jerk about it and just let it idle for 2 minutes.

That's actually the combo I was thinking about going with. Wasn't sure if the Greddy Axle back matched up with the front pipe. Might go with the axle back section from Invidia (Q300) for a full 2.5 inch system since the Greddy is 60mm (which I'm not completely opposed to but need to do more research and see if that even matter when NA). Also looking at the Nameless EL or UEL catted header that should be coming out soon. No rush so I'm just gonna wait and see what looks like the best option.

The axle back doesn't go to the front pipe it goes to the midpipe which does match up to Greddy ... Cat back would go to the front pipe and plus they all should match up because they are all made to fit stock pieces

Sorry, meant to say mid pipe. Thanks!

I have it installed and in fact it does match up perfectly

Anybody ever get a sound clip of the nameless down/over pipe, especially with the rest of the exhaust still stock?

I went from a Nameless catted/resonated over/front pipe to a Motive overpipe and Motiv catted front pipe. I can not hear any difference in sound. I was worried about drone losing the helmholtz resonator that the Nameless pipe had but there was absolutely no difference.

any reason for the change?

My car has the Nameless FP/OP combo with resonator and high-flow cat, along with their axleback with 5" mufflers. Those are the only exhaust/engine mods in this video.

[ame="https://www.youtube.com/watch?v=qGtXeoXXYC4"]BRZ Nameless Exhaust FP/OP Combo with Axleback - YouTube[/ame]