Leg Intake funnel, MOR LOUD
 

hey club ftttttttttttttt 86.

I got my shipped from Japan parts. only took about a month :mad0259:

ill post the stuffs i gots, the one i installed today was the LEG hyper intake.

the intakes louder, tho i also installed the trd filter so that may be helping, but it is like 50% louder so yea. I also, cut about 10 of the triangle things in my bumper grill for the whole mouth to be exposed, ill take pics 2m coz its dark now. I also feel more power :drool:

Edit: this was very light, i didnt weigh it, but id have to guess under 3 lbs. Its made out of fiber glass, not plastic. The car does feel faster also, tho i did the jdm trd filter swap too


http://farm4.staticflickr.com/3748/1...900cec7e_c.jpg

Before:http://farm8.staticflickr.com/7358/1...93526ac5_c.jpg
After:
http://farm4.staticflickr.com/3813/1...85c1f756_c.jpg

http://farm6.staticflickr.com/5517/1...4ac08be5_c.jpg
http://farm4.staticflickr.com/3704/1...9c870cd3_c.jpg
http://farm4.staticflickr.com/3684/1...9dfd6291_c.jpg
http://farm8.staticflickr.com/7359/1...465e973e_c.jpg[/url]

hmm interesting. feel faster?

deffinetly

Please do explain your gold foil airbox cause that looks amazing

These stock-intake mods are starting to get ridiculous

http://www.ft86club.com/forums/showthread.php?t=49277

:thanks: by now i could of bought a cai :bonk:

Does this piece stick directly to the environment inside the front grill?

yes, ill post a pic tomorrow, you can see the bottom opening through the bumper grill

I foresee a potential inhalation of water.

You might as well remove that gold resonator box if you want moar loud

Where do you live that you see water flow up?

I have been looking at the zeek kit and syms kit. Where did you purchase this peice at?

japanparts.com wait is long........ also their "point system" is bs. i spent $1600 usd, and they gave me $1.20 usd in credit.

Woah hope you got more than a intake duct lol. I like japanparts online store haven't made any purchases yet but was considering the syms cf intake setup from them. I am trying to get the sard carbon I take tube from rakuten.com right now but that is a serious importing process. Looks good bro. Evasive motorsports has a kit from a company called. Zeek that looks real nice too. Thanks for the info autoCAR

Coool... although looking at that, I think it can be replicated with sheet metal rather easily.

true. u can make it very easily if your nice with fabricating thin aluminum. Also if you want to just make everything at normal angles, this would be a cake for a decent fabricator. My guess would be it be heavier tho.

I like it and would consider it w my vortech kit but I'm worried about water and if it'd cover some area of the top of the intercooler

That's a huge opening. I'm liking the variety of ducts now available. Was the $1600 for the duct alone?

nooo this duct was about $250. I got a bunch of other stuff too off japanparts

This leg duct is 326.91 shipped
Zeek Fiberglass 314.61 shipped
HKS 216.50 shipped

Honestly I'm digging the hks one the most since the opening looks larger and it wouldnt get in the way of my vortech intercooler

Yea I was noticing the Leg one is real thin, the Zeek is slightly bigger and HKS is wide open

I got the zeek kit on the way. I will do a dyno and write up for it. It looks very nice behind the grill can't wait to see some vids of the sound it creates! Are you planning on changing the tube from the throttle body to the airbox?

Yea it will look great through the bumper grill. Add a oil cooler and now were talking lol. Cant wait to order mine just need reviews

All the bugs that would end up in the rad would not glue themselves to that.. You would have to use a power washer to get them off and that would make its way up top.. Not a lot of it but that one asshole water droplet would

So anybody got a stock snorkel I can have to do a few tests on?

I got one but I wanna keep it incase I ever sell the car, n wanna turn it back to stock

hks just came out w a new funnel/snorkel/pre air filter system, but this ones unique in that it comes with essentially a radiator shroud to direct air into the funnel. Check out the pics at Japan parts,

edit: price is bonkers tho, almost $600

http://www.japanparts.com/db/parts_d...=18&submit.y=8

this is a tuning company called Kansei. different tuning branch not an actual HKS part. this is made of carbon and blocks off all outside and engine heat. looks to be the real deal but pretty expensive. i feel that anyone with some fiberglass know-how could make the block off plates and save a few hundred bucks.

bump.

Spare yourself the dyno because these parts are not made for typical dyno conditions. I can speak from direct racing experience that these "ram air" type ducts are amazing and work wonders for the car IN THE CONDITIONS IT WAS MEANT TO BE USED. That is the key point. This is a circuit machine and those ducts work at speed. Above 60ish and above 5K rpm's you will know what i am saying. U cant truely dyno this without proper wind tunnel, but drive car the way i said and u will feel it.

I know this ram air style induction setup is much more for tracking the car due to airbox restricted classes and not gains on the dyno but I am keeping a strict record of upgrades and power gains.

@autoCAR where did you get your beatrush stuff from?

ft86speedfactory

You would need to drive through a few feet of water to pose a problem. At that point you should have bought a jet ski! :)

does anyone have this for the brz?
i am wondering about the cut on the bumper you have to do to apply this according to japanparts.com
i want to order it but depends where the cut is and how.

not saying your wrong but i ordered this for my BRZ and i am not aware of any cutting of the bumper. just checked japanparts website too, and i dont see anything :iono:

@DAN_BRZ, if you search air element and scroll down to it, at the bottom it says "BRZ owner needs to cut bumper for this item to install." thats the only thing thats holding me back from ordering this.

Ever figure out if Legsport fits brz?