Khorne's - AUDM Red 86 GTS Sprintex
 

Hello All,

Thought i should make a journal now that my car is boosted.

Recieved in Feb 2013, car was build Jan 2013.

First mod was wheels and tyres, 5Axis S5:F Wheels 18x8 with Federal 595 SS 225/40/18.

Second was gear knob from flossy with the 86 logo on it. Invidia N1 Catback.

Next was Invidia Mid pipe and motiv overpipe and a Seibon VS style carbon hood.

Yesterday i picked the car up from getting a Sprintex intercooled supercharger on the car, no headers or intake yet.

Tuned to run on 98RON/93AKI it's putting down 230whp and 184ftlb :party0030:.

Planned:
Headers
CAI
Oil Cooler (will be on next week)
E85 Tune

http://i.imgur.com/gmun7Pv.jpg

http://i.imgur.com/311dSV5.jpg

http://i.imgur.com/4c0wNJ2.jpg

Subscribed!

Ordered a set of red crystal eye tail light. Been meaning to replace mine for a while due to the fogging/leaking problems.

http://i.imgur.com/EAPF28L.jpg

Also buying a P3 cars vent of a good mate @stevo_12v to monitor my oil temps.

http://i.imgur.com/ugXEp72.jpg

Installed my P3cars vent gauge. Works awesomly good for keeping an eye on temps now im FI.
Also picked up a Mocal oil cooler kit which will be installed soonish (as its almost summer here).
And my Crystal eye lights were delayed so i should have them next Wednesday.

Crappy pic but the gauge in action, fits in nicely with the oem cluster.
Install was very easy total about 30 mins, this was the first time i've takes any trim off a car. Picked up a 5 pack of various trim removal tools for $10 from Supercheap Auto as well.

http://i.imgur.com/E9UGEDh.jpg

how well does that p3 cars gauge work? I was thinking of getting one since I went the forced induction route

Only had 2 drives with it so far, mostly been using the coolant, air and oil temp options, but it's easy to install and seems accurate and very user friendly.

Got my Crystal Eye's intalled.

http://i.imgur.com/I0Nn0KV.jpg

http://i.imgur.com/gXdwLDw.jpg

Niiiiice!! This is the sickest Mount Fuji Red GTS in Perth!! :P

Btw, thanks for the help on the P3vent install. I did 6.2sec for 0-100 last night ! :D

Just a small update with some crappy pictures, been trying my hand at vinyl wrapping.

http://i.imgur.com/0xyrjLX.jpg

http://i.imgur.com/jc1V2o0.jpg

http://i.imgur.com/FFZ4K12.jpg

Overall im pretty happy with it, a few mistakes on the gauge cluster surround but since it was a first try im pretty happy.

$46AU for 2.3mx1.5m of vinyl in cherry red metallic, brand is Avery.

Oil cooler should be on in a few weeks, and have a GT wing and some cannards on the way.

So reading the first post i said my oil cooler was going to be on in a week at the end of September and it still isnt :cry:.

Held off to do it with a oil change, got it all ready and BAM found that Toyota had over torqued the factory drain bolt, almost rounded it off. Decided to get its 15,000Km service done and the plug removed at a shop. Had the OEM plug replaced with a Fumoto valved plug and its holding up fine and should make the next oil change a treat.

While i did have the front off before we found the plug problem i removed the plastic grill to run open mouthed and spray painted the crash beam black.

I picked up my new plates for the car as well.

Oil cooler now 100% will be on the saturday after xmas come hell or high water. A week after will be my car's first trip to the track since the S/C went in and im really looking forward too it. :burnrubber:

Pic1 - Front off
http://i.imgur.com/thfPLau.jpg

Pic2 - Blacking it's teeth
http://i.imgur.com/RCE9Ovx.jpg

Pic3 - Fumoto valve
http://i.imgur.com/vvVssDw.jpg

Pic4 - Open mouthed
http://i.imgur.com/LO1TROT.jpg

Pic5 - New plates
http://i.imgur.com/VOvrj8h.jpg

It's about dayum time :thumbup: Oil cooler is finally in the car.

Install time 3.5 hours, Only trouble was the clamping mechanism on the hoses wasn't normal. Other than that no cutting or modification of the body or panels required for install.

Small leak on the left fitting on the oil cooler after tightening it is now down to a few drops after my shakedown tonight but still a small leak need another spanner to tighten more which ill have tomorrow.

In action it is awesome, usual reported cruising oil temp was 94-98 degrees depending on ambient. Only tried in hot weather today and it was sitting on the thermostat at 83-85 degrees reported. Under heavy load the temp rises a bit but once backed off it shoots down.

Track next weekend will report back.

Overall a pretty clean install and freaking awesome results so far.

http://i.imgur.com/DtUIQ2e.jpg

http://i.imgur.com/M0JTckB.jpg

http://i.imgur.com/PzvzEwK.jpg

Also went to a nearby dam for sunrise this morning before i installed the oil cooler for some photo ops.

http://i.imgur.com/Xy4HqkB.jpg

http://i.imgur.com/akFADhO.jpg

http://i.imgur.com/cOeYZRq.jpg

I ordered some MCA blue coilovers as well this week, along with some 17x9 Enkei RPF1's, time to get some low.

Tidied up my lines

http://i.imgur.com/kdmNsxu.jpg

Nice car man! Serpentine shots look great!

Cleaned my tips

http://i.imgur.com/rnSywBM.jpg

Had some fun on the track. As you can see from the videos I'm not that great a driver, though i have improved a fair bit since my first track outing.

2 Videos 1 AutoX Skidpan, 1 Full Track at RAC training center in Perth West Aus.

I'll upload a few more vids and add them here.

[ame="https://www.youtube.com/watch?v=9woDxkND8vI"]Toyota 86 Supercharged AutoX - YouTube[/ame]

[ame="https://www.youtube.com/watch?v=z1bZynwj4LY"]Toyota 86 Supercharged Full Track - YouTube[/ame]

*Edit*

A good AutoX run haha

[ame="https://www.youtube.com/watch?v=_FwIhyw3MW8"]GOPR0032 - YouTube[/ame]

Some cruddy pics of my new shoes.

17X9 +35 Wrapped in RE002 235/45/17

http://i.imgur.com/N2onlzZ.jpg

http://i.imgur.com/Bh3EzlR.jpg

lol, another rpf1 in perth.

There's quite a few(incl me) with RPF1's :D

Its a great wheel. light and cheap. Hard to beat. Great offset you chose. :clap:

Got my coilovers yesterday afternoon.

MCA Blues. Dealing with MCA has been great while a bit slow to respond to emails they have a ton of knowledge.

Be patient the pictures are a bit large.

http://i.imgur.com/OrtV4wY.jpg

http://i.imgur.com/pTmFmHa.jpg

http://i.imgur.com/GGG6jXj.jpg

http://i.imgur.com/Nt89QqT.jpg

http://i.imgur.com/NOVZWME.jpg

http://i.imgur.com/EdOqrra.jpg

http://i.imgur.com/Rh1lShm.jpg

http://i.imgur.com/t3Y8EJc.jpg

This is why i'm putting my xd9s back on today....

RPF1 club for Perth :P

All good actually, I just hadn't seen the exact same size/offset/colour wheel as mine on the road yet until this one.

Coilovers are in.

Full review at http://www.ft86club.com/forums/showt...99#post1472899

http://i.imgur.com/YubZLVR.jpg

Did you get it aligned?

That would then make it 4 people in black(including me), 17*9 and +35 (and a couple more in silver). I still love these wheels though :)

Some pictures i took last weekend.

Also have a Cusco leveliser arm on it's way to fix the headlight dip problem and drop the last 10mm off the rear.
Also in the post;
Sharpie white oil based paint pens
Scantool MX + OBD2 Y cable
Whiteline LCA's
Works bell hub + NRG Quick release + Momo steering wheel.

http://i.imgur.com/jMxHEGX.jpg


http://i.imgur.com/zLKXeLa.jpg

Looks great mate. Love the fat tyre look. Will look good with the lettering done on them.

Nice shots....where were they taken?

My cusco arm for the headlights and my scantool showed up today so i can drop the rear some more now.

Yeh it should look good, i think i got too many pens 10 of them but better off with more than half colored half not.

Abernethy Rd in Oakford, 200m stretch of road the trees make a little tunnel.
I cannot wait until winter/spring when its nice and green.

Would love to join you guys for a cruise one day...

Sent you a PM so we can organize something.

Today my Momo wheel, NRG quick release, Works Bell Hub.

Gotta thank @Evasive Motorsports got from the US to Australia quickly, great packaging but gave me a fright when i opened it under the air con and was quickly covered in packing pellets.

Installing ASAP

http://i.imgur.com/aqQnT0n.jpg

http://i.imgur.com/JSGIuAT.jpg

Because airbags are for wussies! :burnrubber:

:thumbup: Pretty much, i'll try make a Diy for the install as well as there isn't really too much info on installing these for the 86/BRZ yet.

Well, i have yet to have a good drive with it to make up my mind, just took it for a small test to make sure i wouldn't die haha.

http://i.imgur.com/hMvPPNN.jpg

http://i.imgur.com/g3SH3j5.jpg

After having a bit of a drive with the wheel i had to take the quick release out. Both it and the dish on the wheel combines led to the wheel being a bit too close to me while driving.

So wheel is not directly on the hub and feels wonderful to use, i have two options now. Get a wheel with less dish or source a smaller quick release hmmmmm.

So i've decided to go for a smaller QR on the wheel.

Either way it feels wonderful to drive with.

Also did some painting to my tyres for fun, ordered some rear LCA's as well.

http://i.imgur.com/iBDr8MU.jpg

Looks great. I was so close to buying an MX5 that had a similar wheel and tyre package.

So today marks 1 year with my 86.
A lot of money, time and love has gone into it hopefully year 2 will be just as fun.

Cupcake just because
http://i.imgur.com/hnWJOZh.jpg

Been a little while since an update.

Put slotted and dimpled RDA doscs and redstuff pads on today (front only waiting for rears to arrive)

http://i.imgur.com/RRFsXbm.jpg

http://i.imgur.com/x3TXkNo.jpg

Also put the OEM hood back on for winter for heat and to stop rain getting on the supercharger belt.

http://i.imgur.com/3VAuSbk.jpg

So after deciding i need more in the way of brakes i have purchased a AP Racing Sprint kit that should fulfill my track demon.
Picking up some 300V 0W20 tomorrow and the PCV Radium catch can should be arriving any day.
I should really scrub the faded bridgestone off my wheels.