Wheel Directory: Rotiform NUE 18x9.5 +25
 

http://www.darrendriven.com/ft86/title.png


Hey guys! Just wanted to show my BRZ on Rotiform NUE. The tires are 225/40 but id like to test out something a little meatier down the road. I'm running -2 camber all around with all 4 fenders rolled. No rubbing issues that I've noticed yet. I can definitely run less camber with a some pull on the fenders. Enjoy the pics! I'll upload better pictures when I get the chance.

Attachment 51442
Attachment 51445
Attachment 51446
Attachment 51447
Attachment 51448
Attachment 51449

:word::coolpics: :thanks:

These are on my very short list. I know these are more street oriented wheels, how much do they weigh and what tires did you end up with?

Hey. I'm not sure about the weight. I can find out but I had some crappy nankangs laying around which I decided to use. When it's time I'd like to wrap them in Hankook RS3.

I'm usually not a fan of 5 spoke wheels, but I gotta say, I kinda like the looks of those. Available in chrome?

Awesome, i just recently ran into a fell car dude who had these wheels. They cracked after a drift session sadly.

Hope you have better luck!

They are about 25 pounds.

Wow. That's crazy! did he contact the manufacturer?

Not sure.

I questioned Rotiform with use on the track, even made a topic on them.

http://www.ft86club.com/forums/showt...t=41980&page=2



You'll be fine for street driving.


Heres an old pic i found on the internet a while back. http://mail.aol.com/38041-111/aol-6/...wMail&partId=0

I hope i don't worry you. :lol:


Sorry TC.

Haha no worries. I barely drive the car hard. I usually have the wife and the baby in the back seat if we aren't using the forester. Yes I can fit my wife and a rear facing seat in the back! The wife does enjoy riding in the brz and puts our little one right to sleep!

Do you feel that you are at the maximum of the fitment? Do you feel that 235/40 would be good without any rubbing?

With my current ride height, I think I can fit 235/40. I'll definitely need to pull the fenders though and definitely run a little more camber. Like I said, I'm running -2 camber on all 4s and so far I have no rubbing issues with my wife and baby in the back.

Thanks a lot. I plan to run 18x9.5+28 on 235/40 so I will take your advice seriously :)

Looks DOPE. Subscribed.

Are these cast or forged? I assume cast based on specs?

Yes they are cast. You should check out their site. Lots of great looking wheels forged and cast!!!

Rotiform NUE's 18x9.5 +25 Square
 

Wheels Specs : Rotiform NUE's 18x9.5 +25 Square

Suspension: BC Racing extreme drop coilovers with 10k springs square, and stance LCA's

i still need to get camber bolts up front and toe links in the back

A few quick photos that i snapped with my phone

http://farm6.staticflickr.com/5482/1...48f438d3_b.jpg
Rotiform NUE on frs by smsalsuwaidi, on Flickr

http://farm4.staticflickr.com/3829/1...ac9c417b_b.jpg
Rotiforms nue on frs by smsalsuwaidi, on Flickr

http://farm3.staticflickr.com/2857/1...8949d9f4_b.jpg
rotiform nue on frs by smsalsuwaidi, on Flickr

http://farm4.staticflickr.com/3704/1...4d2b0c8f_b.jpg
rotiform nue on frs by smsalsuwaidi, on Flickr


:burnrubber:

Did you remove any looking collars in the front?? If so how many?

Interesting, I find these somewhat intriguing and repulsive at the same time.

Surprisingly I didn't , but I am running a bit more camber up front because I'm maxed out with my toe in the rear

There goes another axle. :lol:


Honestly though, i wish you luck. I quite like the look.

hope it does go :D then i can get a pair rated for some high hp ;)


Thanks

There are aftermarkets axles already?

Yes.. DSS 600hp and 1000hp ones. I have their cf shaft and it is a quality piece.

Looking clean! What tire sizes??

Thanks ,215/40

215?? Jebus! A bit of stretch huh? Got a closer picture?

Give us some pics down the side, please.
Rotiforms:party0030:

A bit sadly, not as much as I wanted

I'll post some up

They look good on your car. I'm have a hard time picking between these and the rotiform blq.

My car does not look low in this picture :(
http://farm8.staticflickr.com/7401/1...575fa0c2_b.jpg
FRS on Rotiform NUE by smsalsuwaidi, on Flickr
@sevi21 here you go
http://farm6.staticflickr.com/5542/1...d50d6c5c_b.jpg
Stretch on Rotiform NUE 9.5 215/40 by smsalsuwaidi, on Flickr

Tires have curb protectors on them don't they? That will reduce the amount of stretch they appear to have, looks good though man

Why does yours seem lower than mine I'm maxed out on extreme lows too lol

18" maybe?
Also my rear is a tad lower thanks to the stance lcas's I want to go lower but I don't know

Any problems full locking the steering wheel with 9.5 up front?

Never use full lock tbh, but i do get occasional rubbing on turns sometimes.
Fyi, my fenders are pulled up front ( very mildly )

Quick midnight shoot
Car is really dirty and the rims are too, they look way better cleaned

Ignore the crappy silencer, thats the only way my car is drivable, running a straight manifold back and i really feel like i should drop it some more


http://farm8.staticflickr.com/7453/1...df4298c9_b.jpg
Frs on Rotiforms NUE by smsalsuwaidi, on Flickr

http://farm4.staticflickr.com/3706/1...578fc6ea_b.jpg
Frs with toms by smsalsuwaidi, on Flickr

http://farm6.staticflickr.com/5472/1...5d3cfc9d_b.jpg
Frs with rotiforms toms and crappy exhaust by smsalsuwaidi, on Flickr

http://farm8.staticflickr.com/7332/1...58cefb8b_b.jpg
Frs rotiforms by smsalsuwaidi, on Flickr

looks amazing!

Looks hella clean man good job. If you dont mind helping me out i would really appreciate it. I currently am parting out my Genesis Coupe which i had slammed on CCW LM5T's 18x10.5 +10F and 18x11 +6R but clearly they wont fit on the new BRZ i'm buying on thursday so i have these for sale, and purchasing a new set. I will be putting the BRZ on air bags so would like to know what is considered "aggressive" on the frs/brz. Your 18x9.5 +25 seems to be pretty flush on coils, of course with some decent camber in the rear. Keep up the great work man

Hmmmmm it's really a tough call, it all depends on how much your willing to go with. I feel like there isn't much room in the front, but I'll be adding more camber soon, the rear thou could talpke some more

Thanks :D,

http://farm6.staticflickr.com/5508/1...b2134eea_b.jpg
DSC_0436 by smsalsuwaidi, on Flickr

http://farm3.staticflickr.com/2821/1...eb0f1504_b.jpg
DSC_0437 by smsalsuwaidi, on Flickr

http://farm4.staticflickr.com/3731/1...e71c349a_b.jpg
DSC_0440 by smsalsuwaidi, on Flickr

http://farm6.staticflickr.com/5494/1...7f84528b_b.jpg
DSC_0438 by smsalsuwaidi, on Flickr

http://farm4.staticflickr.com/3782/1...05cb83a9_b.jpg
DSC_0439 by smsalsuwaidi, on Flickr

http://farm8.staticflickr.com/7414/1...f47194eb_b.jpg
DSC_0453 by smsalsuwaidi, on Flickr