Wheel Directory: 2Crave MACH-9 17x7.5 +45
 

http://www.darrendriven.com/ft86/title.png

Just got these in the mail and got them mounted. They're 17x7.5 +45. The website actually listed them as +35 but the box said +45 :iono: looks like 45 to me. Kinda wish they were actually 35 though. Might look into spacers. Would've liked them to be a little less shiny but i think they look kinda cool

Clean setup.

Wasnt sure about the glossy machined aluminum but i think itll grow on me. Worst case i might try one of those new plasti dip colors.. Maybe the grey or something

I like the stockers better.

If I'd purchased +35 wheels, and got ANYTHING other then what I had paid for, they'd be going back.

i'm honestly not sure which one it is. every site that sells them only lists them as being available in +35 for the 17x7.5's. The box said 45 though. not sure which description is a misprint. I'll probably get spacers though to get them closer to flush. Probably 25mm in the back, not sure what to do in the front though. i don't really want to replace the studs

I like them. They look cool with the blue lugs - classy. Plus anything is better than stock, they're probably lighter too!

Looking at the photos, they are +45. You can confirm this by looking at the outer edge of the rim where it will be stamped J45 or something similar.

If they are not what you ordered i would totally return them.

Send those things back. They were not correctly advertised.

i was thinking about returning them but i kinda like them. it might actually work in my favor since i may use the stock rims for winter tires and if i put the spacers on, it'll make both sets closer to flush which would be nice

I would return them simply because they weren't as advertised, but if you already mounted and put some miles on them, not much of an argument to make at this point. Just enjoy them.

If you plan on lowering later on, definitely get spacers but if you're keeping stock height, I think they're no worse than the stock fitment.

yea i had them mounted and actually got a flat already this morning :( they seem to be holding air but might stop by the tire shop tomorrow morning and have them check it out.

I'm actually lowered an inch now on hotchkis springs; probably not going any lower since its my daily driver

i might pick up the b2 auto spacers. i can get 20mm in the front and 25 in the back for 210 shipped which is pretty decent and they look to be good quality. those should be pretty much perfect for both sets of rims to get them somewhere near flush

well one of them came defective and has a small bend at the edge so the tire can't hold air. perfect :(

waiting to hear back from performanceplustire.com who is going to contact 2crave about a replacement

They are shaved from blanks starting at +45

Added to the Wheel Directory:
http://tinyurl.com/86wheels

So with these wheels, did you have 215/45r17 tires on them? Because i want to get these for my FRS and I know this wheel will fit my tire, just hoping they dont rub.