Need PICS for HTA Front Lip
 

I only see 3 photos around the internet. I need to see how it looks installed from the space between the lip and the bottom front bumper. Whiteout will be nice. please help forum!:thanks:

Pic of a customers car..........

http://i81.photobucket.com/albums/j2...psd03e71d6.jpg


Posted on our Facebook page; http://www.facebook.com/pages/HT-Aut...82641861752760

And a blue one with kit;

http://i81.photobucket.com/albums/j2...ps865d2618.jpg


New stuff being developed here; http://www.facebook.com/pages/HT-Aut...82641861752760

Black;


http://i81.photobucket.com/albums/j2...ps70395897.jpg


Facebook; http://www.facebook.com/pages/HT-Aut...82641861752760

Grey;

http://i81.photobucket.com/albums/j2...ps935b729f.jpg


Facebook; http://www.facebook.com/pages/HT-Aut...82641861752760

So are the FR-S kits available? As in front lip, side skirts, rear spats, and diffuser?(window spoiler if you have it ;)) Do FT86Club members get a special deal? @HTAutos

Full kit

can the rear spats be installed with the rally armor mudflaps? just wondering

Yes, I would think so.

For USA you can buy here; www.koruworks.com
Canada; http://store.fraal.ca/ShopByBrand/HTAutos.aspx
Australia; http://www.importmonster.com.au/

Cheers,

Mark @ HTAutos.;)

Nothing shows up on the Koruworks website for the FR-S

Hey Mark, can you throw up some BRZ pics as well since I know I'm in the market as well and others may find them helpful.

Thanks!

I'm thinking the side skirts will cover the dent the dealership put in my rocker area and this seems like the best match for my tight budget and it looks great.

Here is another link for US/Canada.

http://subarukits.com/shop_usa_5.html#

Too much for me I guess, the $135 for shipping puts me over me meager budget.

So this front lip will fit the FRS for sure? What material is it made of?

Can buy in USA or Canada here; http://koruworks.com/

Australia here; http://www.importmonster.com/

Yes fits the FRS. Made from Polyurethane.

Mark @ HTAutos:)

It is nowhere to be found on their website, at least not that I could find...

Good luck going through Koru I sent an email over a month ago asking about the kit and still havent got a response. how many ppl are interested? maybe I can work something. I ended up ordering mine from uk but shipping is expensive of course.
Ill post pics of mine tomorrow since mine is lowered more then most of these except the whiteout.

Maybe this is something @HTAutos can help us with?

Does anyone know if painting polyurethane will work? i'd imagine it would crack the paint since the material is flexible.

You can paint PU as long as you get a special "flexible" paint but yes, if you hit the paint hard enough, it will crack.

Is drilling really necessary to install this lip ?
Not keen on drilling holes in my baby :)

It is no different than painting the bumper on your brz/frs. :)

BTW almost all of todays automotive paint has the flex-additive in it's binder from the get-go.

lol its so hard to take you seriously with your profile picture. By flexible paint do you mean plastidip? or is there an actual flexible paint?

Yeah I know. Its a pretty funny picture. Anyways. I just remember reading through my owners manual and it was saying *insist on genuine subaru paint for reapirs* and of course it showed how the genuine subaru paint doesnt crack as much as aftermarket paint.

I am leaving my PU lips unpainted so that I can just scratch the hell out of them. I've seen painted cracked lips and it just doesn't look good.

You should definitely try plastidip and see what happens.

The least expensive way to buy the full kit and have it shipped to me in AZ / USA is from the UK EBay site

http://www.ebay.com/itm/Toyota-GT86-...item485678a552

$100.00 US less expensive than all the other sites listed in this thread............

damn that looks like a bootleg copy of the vertex lip...except it doesnt go into the grille area, it just stays tucked under its not bad but kinda like the vertex

all plastic bumpers on any car imaginable are made from polyurethane

there is a chemical additive that you put in the clear and or color Called "flex additive" so no real special paint. now there are "urethane" primers made to adhere to raw polyurethane then over that you can spray whatever you like. with the additive you can bend a paint chip almost 180 degrees over itself and it wont crack pretty cool stuff

www.smyperformance.com keep some stock also in USA

Hi,


Try here; http://koruworks.com/blog/ht-autos-k...-now-in-stock/


Mark @ HTAutos.

Can you install without drilling more holes?

The leading edge of the FRS bumper has a lot of contour so without the additional mounting hardware, it has the potential to be too far away from the bumper leaving a gap.

Thanks!

Eugene@Koruworks

Can be bonded on with PU adhesive sealer, if you do not want to drill.




Mark @ HTAutos.

Attachment 69392


Sent from ARIZONA86 HQ

Decision made. I'm getting one. Looks so good!

Finally got mine on. I'm really happy with this lip.
http://i239.photobucket.com/albums/f...328_120929.jpg

im interested in this lip, but am i reading this right, you have to drill in the bumper to get perfect fitment? can someone clearify please..

Do you also drill for the side skirts?:iono:

I drilled for everything


Sent from ARIZONA86 HQ