Originally Posted by Sarlacc (Post 970659)

My GT86 has fog lights. I haven't even turned them on yet.
Why do you want fog lights so bad? They're kind of useless in all but extreme conditions.

Originally Posted by YamahaR86 (Post 970276)

Skeptical on the switch since the fr-s only has the trunk and gauge brightness there.

I saw a member here with the fog switch there but he had to drill to have it mounted there.

Originally Posted by TwinWhiteOut86frs (Post 970372)

LMAO thats not even a frs bumper in the picture..good luck with that sir

Originally Posted by supramkivtt2jz (Post 970664)

I used the fogs all the time in my A4 - i like having a better view of whats to the side of the road without using my brights to blind people

Originally Posted by Bt216 (Post 1003201)

I just bought this kit.. the seller already sold 7 of these. I asked to buyers how was the quality and they said good

Originally Posted by Sexyeve (Post 1006390)

Does not look right to me and not much info on what your buying .
Found this on Ebay http://cgi.ebay.ca/ws/eBayISAPI.dll?...e=STRK:MESE:IT

Originally Posted by Sarlacc (Post 971902)

That's a bad habit IMO. (And it's illegal in many parts of the world.)
Two reasons for this:
1. Your fog lights will annoy and "blind" oncoming traffic.
2. The effective range of what you can see is limited to the brightest part of the road. You can see further ahead with just your low beam than you can with your fog lights on.

The general rule of thumb is you should only use fog lights when visibility is under 100m/330ft. And even then it's a judgement call, in heavy snow it's often better to leave them off.

So by all means, buy cheap aftermarket fog lights as bling on the car, but please don't use them unless it's absolutely necessary.

Originally Posted by killercl0wnfish (Post 1017992)

bulbs work fine and are nice and bright i orderd a 35w 3000k kit for them ... lenses seems thick and when i tap on them dont sound like its thin or weak.. i can adjust mine with a turn of a screw driver from the back... u dont need any kind of oem switch i just wired mine to the factory fog light wire that is already ran to the turn signals then found the white wire under the steering wheel and ran switch from wire to switch then switch to ground ... works perfect and even shows the fog indacater on the dash comes on with head lights only and use switch when u wanna turn it off or keep it off

Originally Posted by Fast_Freddy (Post 1017984)

Aren't you confusing fog lights with driving lights?

Originally Posted by killercl0wnfish (Post 1017992)

bulbs work fine and are nice and bright i orderd a 35w 3000k kit for them ... lenses seems thick and when i tap on them dont sound like its thin or weak.. i can adjust mine with a turn of a screw driver from the back... u dont need any kind of oem switch i just wired mine to the factory fog light wire that is already ran to the turn signals then found the white wire under the steering wheel and ran switch from wire to switch then switch to ground ... works perfect and even shows the fog indacater on the dash comes on with head lights only and use switch when u wanna turn it off or keep it off

Originally Posted by killercl0wnfish (Post 1017992)

bulbs work fine and are nice and bright i orderd a 35w 3000k kit for them ... lenses seems thick and when i tap on them dont sound like its thin or weak.. i can adjust mine with a turn of a screw driver from the back... u dont need any kind of oem switch i just wired mine to the factory fog light wire that is already ran to the turn signals then found the white wire under the steering wheel and ran switch from wire to switch then switch to ground ... works perfect and even shows the fog indacater on the dash comes on with head lights only and use switch when u wanna turn it off or keep it off

Originally Posted by Arrakis (Post 1018598)

Hi killercl0wnfish,

Congrats, You new fog-lights look great!

Could you explain how you tapped the wires of your aftermarket fog-lights to the factory fog-lights wiring? I thought our FRS does not come with factory fog-lights!

Can you turn your new fog-lights on & off independently from the low beam and the high beam? Thanks!