Custom Magnaflow Cat Back
 

Just wanted to share my FR-S's new exhaust. It was custom made to fit my custom diffuser that I fab'd up and installed (diffuser is from an Elise). The exhaust is made by Burlingame Mufflers: Performance and Custom. It is a hair quieter than my Muffler delete I had before this.

Full 2.5 inch tubing with 3" tips. A Race Magnaflow muffler installed midship where the stock resonator used to be.

[ame]http://youtu.be/BH_WiPiCD84[/ame]

http://burlingamemufflers.com/


P.S. Dan is truly a master at his trade and an absolute delight to deal with.

http://sphotos-b.xx.fbcdn.net/hphoto...82246182_n.jpg

http://sphotos-a.xx.fbcdn.net/hphoto..._8088248_n.jpg

Took it home and put the "beauty rings" around the tips. I'll get better pics during the day when I am at the track today. =)

http://sphotos-b.xx.fbcdn.net/hphoto...01111956_n.jpg

I like that ALOT!!!

So is the diffuser and grille from an Elise? It's a shame here in the UK we are required to have the lower light section as I'd love to do that.

Sounds good!

So where's the reverse light now?

Reverse light delete for now cause race car. I may put some in later

That is very nice!! I wonder if you could get led switchbacks to work as both turn signals and reverse lights?

Sent from my SCH-I535 using Tapatalk 2

Damm that should be the stock look. Nice job!

Very cool! Was the diffuser a direct fit or was there cutting involved?

Looks great man!, but not a big fan of cutting the rear crash beam like that.

Very nice!! How do you plan to finish the panels? Or leave raw because racecar?

The funny thing is with a few more exterior changes you could have people fooled on what the car is... Is that a lotus? Is That a Race Car? Yes, Yes it is. :D

Looks and sounds great! :thumbsup:

Nice job, looks mean. Would have been perfect if it used the Toyota "T" weave!

that is ridiculously awsome

nice work

http://pictures.topspeed.com/IMG/cro...c-5_600x0w.jpg

This immediately popped into my head

Oh hell yeah

Wow, i do see the resemblance! Neat. Thanks for the props guys. :w00t:

bumper beam is reinforced. No worries. Also. Because Racecar.

I like everything except the grill. IFK maybe just need to paint the back of it black

Like the sound but loved what you did to the rear.

Looks awesome and exhaust sounds good too.

This makes me jelly :wub:

Pretty sweet! Where did you source the diffuser, and how much did it run you? I might have done a single exit turn down through that hole in the middle of the diffuser. Then you could mount some reverse lights in those two holes where the exhaust is now.

cause racecar!! bad ass man.

There is plenty of space for reverse lights! :bonk: :happyanim:I won't be using the stock piece though. Maybe ill do the whole switch back thing into the turn signals.

Which manga flow muffler was used for this? Part number if available.

I'll ask Burlingame Mufflers about the part number when I see them next week. It is a 6" diameter race muffler. It is something like 20" long.

I like that rear diffuser setup a ton! Thanks for the idea! :)

part number: 10436

Thank you, I have the JDL EL header now, I am looking to run 2.5" pipes with a high flow cat, and two 14832's at the back