Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB

Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB (https://www.ft86club.com/forums/index.php)
-   Member's Car Journals (https://www.ft86club.com/forums/forumdisplay.php?f=40)
-   -   Daniel's 86 (https://www.ft86club.com/forums/showthread.php?t=29762)

DanoFA20 02-25-2013 01:00 PM

Daniel's 86
 
So i purchased my ultramarine FR-S 6MT october 20th, received november 1st.
:happyanim: obviously like other members they jumping with joy!

i'd like to document my build and if any new members who have questions on things i my self have done and can answer i will be happy to help :)

So as of now i havent done anything, due to back surgery so now im recovered and back to work.

on my list to do.



-Engine Management Tune

-Mishimoto Inlet tube,drop in filter

-Clear Side Markers

-Red Tail Lights

-Fog Lights

-Duck Bill

-Oil Cooler

-Mishimoto radiator

-Invidia catless front pipe. INSTALLED

-Possibility HKS Headers

-Overpipe.

-Short Shift Kit

-Pulleys

-Belt

-Lower Rear Control Arms GT Spec

-Seats,Harnesses,Harness Bar

-BC Racing BR Coil Overs-INSTALLED

-Perrin Brake Booster Brace. INSTALLED

-DBA Slotted Rotos.

-Stop tech SS brake lines. INSTALLED

-Ferodo DS2500 Pads. INSTALLED

-Invidia N1 Titanium Tipped Exhaust. INSTALLED

-17x8 Rota Grid bronze +35 offset,225/45/17 Dunlop Star Spec DZII ORDERED INSTALLED

-Toyota Emblems-INSTALLED

-Carbonfiber Driveshaft

-Crawford Air Oil Separator

-Raceseng cam plate. INSTALLED

-Tow hooks

-Silicone coolant hoses



as for gauges id really like a 3 pod gauge single DIN and replace the stock head unit with a single DIN .
Im going to ad a Wide band a gauge for oil pressure and a gauge for oil temp

Ect. Better clutch/ flywheel. Knee pads, underpanels, engine dress up, rad cap, oil cap.

Come Spring I will be changing fluids, Trans,Diff,Brake Fluid. Ive heard great things from Motul for Gear Oil and I may stick with old faithful ATE Super Blue for brake fluid unless some one knows better break fluid that they could recommend.
http://sphotos-b.xx.fbcdn.net/hphoto...83137313_n.jpg

http://sphotos-b.xx.fbcdn.net/hphoto...00835399_n.jpg

http://sphotos-a.xx.fbcdn.net/hphoto...32005518_n.jpg

http://sphotos-b.xx.fbcdn.net/hphoto...35425531_n.jpg

http://sphotos-a.xx.fbcdn.net/hphoto...35613117_n.jpg

http://sphotos-a.xx.fbcdn.net/hphoto...83596985_n.jpg

DanoFA20 02-28-2013 08:08 AM

Springs being ordered next week

diss7 02-28-2013 05:11 PM

Nice looking car!

Mods list is pretty sweet as well. You've done your research.
Dream world, I'd go Volks over Rotas, (wouldn't everyone!) but hey can understand as the te37's are probably 4 times the price!

Luke.Cariveau 02-28-2013 05:19 PM

Look's Great!

Spencer Strayer 02-28-2013 07:38 PM

best color!

DanoFA20 03-01-2013 10:21 AM

Quote:

Originally Posted by diss7 (Post 763828)
Nice looking car!

Mods list is pretty sweet as well. You've done your research.
Dream world, I'd go Volks over Rotas, (wouldn't everyone!) but hey can understand as the te37's are probably 4 times the price!

yah te37s that id ideally want are like 4000+$ and rotas seem to be a decent wheel for the price so for now ill get them :)

DanoFA20 03-01-2013 10:25 AM

Quote:

Originally Posted by diss7 (Post 763828)
Nice looking car!

Mods list is pretty sweet as well. You've done your research.
Dream world, I'd go Volks over Rotas, (wouldn't everyone!) but hey can understand as the te37's are probably 4 times the price!

Yah ive been keeping an eye on all parts that have been released for the car. and i keep checking dyno charts and watching videos and have been singling out specific parts that seem to get great praise :-D

Jayde 03-01-2013 11:13 AM

So many mods to do, so little cash to spend. Well, me anyway. :D

DanoFA20 03-02-2013 12:35 PM

Quote:

Originally Posted by Jayde (Post 765452)
So many mods to do, so little cash to spend. Well, me anyway. :D

Dude anthony i know right!! youre like oh i need that , oh whats this do? oh i need that too. hey but theres this part too i need this FFS! :bonk:

DanoFA20 03-11-2013 10:15 PM

-Update. Toyota Front and rear badges ordered waiting on paycheck to order springs.

DanoFA20 03-14-2013 10:55 AM

-update: RCE Yellows ordered.

DanoFA20 03-28-2013 11:03 PM

So last sunday i went down to CT for my first Auto X with my 86 was a blast did quiet well :) http://sphotos-b.xx.fbcdn.net/hphoto...47159558_n.jpg

DanoFA20 04-19-2013 06:15 PM

https://fbcdn-sphotos-h-a.akamaihd.n...98583570_n.jpg

took first this past weekend in STX class doing good this season :) more to come !

DanoFA20 05-10-2013 06:18 PM

So recently i ordered wheels tires and coilovers.

I bought 17x8 +35 Rota Grid racing in gold. with blue lugs hub centric rings and Dunlop Direzza ZII tires 225/45/17 after i put those on the handling was just insane.

shortly after i got coils bought BC Racing Br coilovers. ride height adjusted evenly and got it aligned. im very happy with the handling and the ride quality.

the only thing that sort of sucks is that the rear camber is un adjustable until i get control arms. so im sitting at -3.4 in the rear and adjusted the front camber to -1.1

sunday im auto crossing once again at the fairfield county sports car club event. to test how much more traction and handling improvements i get from this set up next will be a full corner balance


https://fbcdn-sphotos-g-a.akamaihd.n...69552484_n.jpg

https://fbcdn-sphotos-b-a.akamaihd.n...43126819_n.jpg

https://fbcdn-sphotos-e-a.akamaihd.n...65604185_n.jpg

https://fbcdn-sphotos-c-a.akamaihd.n...13272428_n.jpg

DanoFA20 06-12-2013 11:35 PM

So I raced in the Wicked Big MEET 2013 auto cross event here are some pro photos taken of my car.


https://fbcdn-sphotos-c-a.akamaihd.n...54494858_n.jpg

https://sphotos-a.xx.fbcdn.net/hphot...76136574_n.jpg

https://fbcdn-sphotos-g-a.akamaihd.n...74011943_n.jpg

https://fbcdn-sphotos-f-a.akamaihd.n...74782421_n.jpg

https://sphotos-b.xx.fbcdn.net/hphot...32638618_n.jpg

https://sphotos-b.xx.fbcdn.net/hphot...42429780_n.jpg

DanoFA20 06-12-2013 11:37 PM

I also have an update. i Recently added Ferodo DS2500 Pads for front and rear.

I added Stop Tech SS brake lines front and rear.

ATE Super Blue brake fluid.

Perrin Brake Booster brace.

The brakes after the installs are an incredible improvement. i first did the brace, then added lines and fluid, then added pads the increase with each part is amazing. Highly recommended .

DanoFA20 10-02-2013 04:42 PM

New Update.

Sorry i havent been on in a while ive been having one busy summer.

so i havent tracked a in a little but im going to be at the end of the month. i got bored of the hp and sound so i decided to go to the next step, so i bought a catless front pipe made by Invidia. very easy install like the cat back system. nice welds and good material. the sound is deff louder and more race car like sound lol. i can definitely feel the hp and trq gain when you step on it. more responsive and just to test it out. my friend with a bone stock brz rolled off a light with me we went from 1st to 4th gear and i was a good 3 car lengths ahead at least. and the stock catted pipe weighs a ton. this new one weighs 3.9 pounds or so

THMotorsports.com 10-02-2013 06:29 PM

Looks great nice to see these getting tracked

DanoFA20 10-03-2013 02:52 PM

Quote:

Originally Posted by THMotorsports.com (Post 1246932)
Looks great nice to see these getting tracked

thanks dude :) gotta upload my photos from newjersey motorsport park im going at the end of the month too at thunderbolt:w00t:

THMotorsports.com 10-03-2013 02:55 PM

NP! Thinking of picking my self one up ^_^ looking forward for the new pics!!!

DanoFA20 10-03-2013 02:58 PM

https://scontent-b-iad.xx.fbcdn.net/...54032306_n.jpg

https://scontent-a-iad.xx.fbcdn.net/...81062119_n.jpg

https://scontent-b-iad.xx.fbcdn.net/...41933172_n.jpg

https://scontent-b-iad.xx.fbcdn.net/...43059402_n.jpg

https://scontent-b-iad.xx.fbcdn.net/...27225011_n.jpg

https://scontent-a-iad.xx.fbcdn.net/...44555109_n.jpg

https://scontent-a-iad.xx.fbcdn.net/...62737181_n.jpg

https://scontent-a-iad.xx.fbcdn.net/...44192887_n.jpg

https://scontent-a-iad.xx.fbcdn.net/...32771442_n.jpg

https://scontent-a-iad.xx.fbcdn.net/...32771442_n.jpg


pictures from NJMP August 3rd 2013 ma birfday

GT86drifter 10-03-2013 03:42 PM

yay! track car!

Simply_the_best 10-03-2013 06:56 PM

I see that you are planning on getting the Mishimoto oil cooler. I had spoke with someone over at Mishimoto a few weeks ago and their oil cooler does not come with a thermostat. I know that the Perrin one does and personally think it looks way better as well. Perrin makes some quality parts.:party0030:

DanoFA20 10-13-2013 12:37 PM

Quote:

Originally Posted by Simply_the_best (Post 1249198)
I see that you are planning on getting the Mishimoto oil cooler. I had spoke with someone over at Mishimoto a few weeks ago and their oil cooler does not come with a thermostat. I know that the Perrin one does and personally think it looks way better as well. Perrin makes some quality parts.:party0030:

maddd money for that kit. its kind of ridiculous how much some of the basic mod parts for this car costs. 600$ for an oil cooler is kinda out of control lol

DanoFA20 12-31-2013 11:28 AM

So I decided that I love this car soo much im not going to track her much,too scared of possibly crashing or someone hitting me. So I bought a 86 RX7 turbo II track prepped for racing in. cheap car and parts are cheap too. Ill still use the 86 for auto cross and maybe a few drift events

PoorMansRacing 12-31-2013 11:35 AM

Quote:

Originally Posted by DanoFA20 (Post 1267451)
its kind of ridiculous how much some of the basic mod parts for this car costs. 600$ for an oil cooler is kinda out of control lol

This.

Agreed! When I compare the prices of bolt-ons for this car and my previous cars, it's one hell of a difference :(

sklimo 12-31-2013 11:41 AM

She is looking good Daniel!!!

DanoFA20 12-31-2013 11:42 AM

Quote:

Originally Posted by BRZTimeTrials (Post 1421318)
This.

Agreed! When I compare the prices of bolt-ons for this car and my previous cars, it's one hell of a difference :(

i know!! like headers should be less control arms should be less. lots of stuff

DanoFA20 12-31-2013 11:45 AM

buying a crank pulley next. and my friend for the holidays is buying me fog lights :happyanim::happyanim:

PoorMansRacing 12-31-2013 11:46 AM

Quote:

Originally Posted by DanoFA20 (Post 1421329)
i know!! like headers should be less control arms should be less. lots of stuff

When I saw the prices for control arms, I was like yeah...no.... :thumbdown:

DanoFA20 12-31-2013 11:53 AM

Quote:

Originally Posted by BRZTimeTrials (Post 1421337)
When I saw the prices for control arms, I was like yeah...no.... :thumbdown:

im going to need them my camber is like -3.3

DanoFA20 02-26-2014 06:44 PM

update- installed raceseng cam plate great fix very easy

Luckrider 03-15-2014 03:30 PM

Being from Stone Ridge I can only imagine you enjoy the Shawangunk byway semi-regularly correct?

DanoFA20 03-26-2014 02:48 PM

Quote:

Originally Posted by Luckrider (Post 1601877)
Being from Stone Ridge I can only imagine you enjoy the Shawangunk byway semi-regularly correct?

i actually havent been there before lol

Luckrider 03-26-2014 03:16 PM

You are missing out. After feeling the grip of my new wheel/tires, I can't wait to go back out there. It is truly a fantastic road with amazing views.


All times are GMT -4. The time now is 12:44 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
User Alert System provided by Advanced User Tagging v3.3.0 (Lite) - vBulletin Mods & Addons Copyright © 2026 DragonByte Technologies Ltd.


Garage vBulletin Plugins by Drive Thru Online, Inc.