Rev Works Orlando Hot Lava FR-S w UEL Headers sittin on CCW's
 

I just dropped off a new FR-S at Rev Works near Orlando,FL to have them do what they do best. They've done a ton of work to my STi and I can't wait to see how the FR-S comes out.

BEFORE (at dealership):

http://s1221.beta.photobucket.com/us...a7d6b.jpg.htmlhttp://i1221.photobucket.com/albums/...psbdf8e09a.jpg


http://i1221.photobucket.com/albums/...ps10dd9242.jpg



AFTER (at Rev Works):

http://i1221.photobucket.com/albums/...ps0e3373ae.jpg

http://i1221.photobucket.com/albums/...ps4c4ecb53.jpg


http://i1221.photobucket.com/albums/...ps89adc815.jpg

http://i1221.photobucket.com/albums/...psbfb4b096.jpg




***Professional Photos coming soon***


We plan on doing the following the next 3-4 weeks:

Stance Coilovers
CCW LM20's 18x9.5 F 18x10 R (black, satin center/gloss lip)
HPS Brake Pads
Stoptech S.S. Brake Lines
M7 T-Titan Sport Muffler, Full Cat Back Exhaust (was an SRT Header Back Exhaust but they're taking too long to ship)
Perrin Overpipe
Perrin Frontpipe
Vibrant Resonator
Perrin Crank Pulley
Rev Works Custom UEL Header (for that Subie rumble!)
Injen SRI
Cusco Rear Lower Control Arms
Hotchkis Strut/Sway Bars
Billet Pro Short Shifter
Sparco Seats
HID Lights (kit)
JDM TRD Shift Knob
JDM Clear Side Markers
JDM TRD Push Start (w BRZ Switch Panel)
JDM Front Bumper Garnish **didn't fit with Seibon Lip, so it's for sale**
JDM Interior Knee Pads/Speaker Pads
Euro Badging (GT86 etc) Matte Black
Seibon Carbon Fiber Front Lip
Side Skirts
Shark Fin Antenna (hot lava)
Carbon Fiber Hood Dampers
Center Console Plaque (86 Circle w "Hachi-Roku" underneath)
Kenwood Double Din w XM/Nav/DVD/Rear Camera
8" Sub/2 Ch. Amp w Light Weight Custom Enclosure
V1 Radar w Concealed Display (hardwired)
Power Rear View Mirror
Python Alarm System w Smart app and LoJack
Custom interior lighting (LED's & amber accent @ pedals, tag lights)

And... in a few months, a Rev Works custom Turbo Kit and Tune. Stay tuned for pics!

Going up on the lift to begin preparing for Rev Works UEL Headers

http://i1221.photobucket.com/albums/...psb17a7d6b.jpg






A few pics of work being done at Rev Works in Florida:

http://i1221.photobucket.com/albums/...ps11bf7c6c.jpg

http://i1221.photobucket.com/albums/...psff5944d2.jpg

http://i1221.photobucket.com/albums/...ps7e37b9c8.jpg

http://i1221.photobucket.com/albums/...ps77bd5454.jpg

http://i1221.photobucket.com/albums/...pscb914f97.jpg

http://i1221.photobucket.com/albums/...pse58d5c97.jpg

http://i1221.photobucket.com/albums/...ps840844f1.jpg

http://i1221.photobucket.com/albums/...ps460e331a.jpg

http://i1221.photobucket.com/albums/...ps5a318ed6.jpg



Which CCW wheels do you think are going on?


http://i1221.photobucket.com/albums/...psd6072f21.jpg



Here's a sneak peak of the wheels on the car. We threw them on real quick just to get an idea of what they would look like on the car, but no stance work has been done yet. More pics soon...

http://i1221.photobucket.com/albums/...ps91194a81.jpg


The M7 Japanese exhaust:

http://i1221.photobucket.com/albums/...ps47f43ef1.jpg



More pics and sound clips coming soon..

Hey, looking forward to meeting you at some point. My car has been up there a few tiems but never as extensively modded as yours is going. I'm going for RTR Class with SCCA so Im limited on my mods.

I wanted to ask you at some point if we could work something out with your front struts. I have Koni front inserts coming and I need a donor set so they can be prepped without taking my car off of the road. I can give you my OEM when we're done incase you want to ever go back to stock. Or if you're willing to see them cheap, I'll buy them off of you.

Hey brother, thanks for the message. Can't wait to meet you guys, too. I know a few of you go out to the meets at Sonics. I look forward to getting out there once we're done.

As for the front struts, you're more than welcome to make me an offer. I have no idea what those are worth.. lol. But I am more than willing to help out anyone associated with Rev Works. It's one big family!

You don't mess around!

How much are they looking to charge for that header?

I'm not sure yet. I'm assuming once they're done they will have a better idea of how much time/work goes into making it and they will price it accordingly. It's the first time they're attempting to make one for an FR-S/BRZ, so this whole process should be interesting. I'm super excited about having that subie rumble, though!! My STi has a Blitz Nur Spec exhaust (deep/nasty rumble, which came off Matt's STi.. thanks Matt!!) and I would love the FR-S to have a similar note. Posting Youtube videos once it's in and we're doing Dyno runs to see some #'s.

New pics up... more coming soon. A big thanks to Rev Works for the great work and to Dan at CCW for helping us custom design some amazing wheels! The UEL headers sound great. Dyno results to be posted soon.

Id be down to meet up with you guys too! Great build btw!!

love it, cant wait to see what happens

This sounded amazing this past weekend!!!

Kinda bummed I missed the meet tonight.

Thanks for all the feedback, guys. It has certainly been a process picking and choosing parts, wheels/tires, etc. We're working with a car that's relatively new to the aftermarket world, so we're definitely doing our research and going with brands that have a proven track record, provide top notch quality, and have good company support behind them. All of this while building a unique but balanced project that most FR-S/BRZ/GT86 enthusiasts can be proud of.

I think a lot of people are going to be excited about hearing the M7 Exhaust with the Rev Works UEL headers. And let me tell you, the headers sound amazing by themselves (stock exhaust)! I don't want to give too much away, but the dyno numbers were pretty impressive.

My guess is the set on the far right but I'd like to see the middle set installed!

Should have went with the grimmspeed hood struts!! But your setup iss going to be insanee!!


Sent from my iPhone using Tapatalk

Finally a set of CCW on a FRS... NICE

You are correct. I was thinking about going with a polished wheel but they are so high maintenance, especially here in Florida where it rains a lot. I've got a set of Linea Corse's on my STi and I'm always cleaning them. But they look so badass. I'm going for the Copper/Black theme on the FR-S.

I know, I should have looked more into that. The grimmspeed's look so sweet. Maybe I'll switch them out eventually. Thanks for the suggestion.

Pics of the CCWs on it NOW!

Pics of CCW's on car should be up by Tuesday or Wednesday! Hoping the Stance coilovers don't give me any trouble.

This M7 Japan T-Titan Full Catback Sports Muffler should be on the car in a few days:

https://vimeo.com/47631472

I'm sure it'll sound amazing with the UEL headers and the Perrin front/overpipe!

Nice build!

Thank you, I appreciate it!

i'm ordering ccw's for my brz as well, good call :D

Wow, you wasted no time!

Nice! Can't wait to see how they look!! I had a tough time choosing since they can do so many different things with their wheel options, but I'm sure whatever you choose is going to look great!

Yeah, luckily this car wasn't my daily so I had an opportunity to just have the shop do the modifications I wanted done right away. The shop mechanic actually broke the car in for me as parts were starting to show up, so once we actually started installing things the engine was over 1,000 miles. The car should be done in less than a week.

A teaser pic of the CCW's is up as well as a pic of the M7 Japanese exhaust. Rev Works is finishing up the stance work on the wheels and tying up a few loose ends. More updates coming this week.

Then it's off to Audio Excellence for all the other goodies and back to Rev Works for the tune (waiting for things to come in).

Some cell phone pics I took yesterday. Professional pics coming soon:

http://i1221.photobucket.com/albums/...ps0e3373ae.jpg

http://i1221.photobucket.com/albums/...ps4c4ecb53.jpg

Very... Very well put together dude.

When are you going to bring it out and learn to drive it quickly?

Lol.. I'm sure if anyone's going to teach me how to drive that thing "properly" it would be you, brother! Looking forward to it!

very nice! thank you for the pics!

:wub: :bow: :thumbup:

how low are you dropped?

Beautiful!

Yeah I hear that! Car looks good! What specs you end up running?

Would like to hear it with the UEL headers. I miss my WRX's rumble.

Those wheels look incredible. Well done.

I'm posting videos soon. We had the uel header, over/front pipe, and the full exhaust on and it sounds wayyyy too loud (no cat, no resonator)! Kinda raspy, but like race car raspy, deep loud... lol. We're throwing a Vibrant resonator on there to tone it down some. I will post a video once I get a chance.

Wheels are CCW LM20's w satin center and gloss lip, polished hardware

Front:
18x9.5 (+44mm) -2 cam. height is 24 1/4 (total), 3.0" Lip
255/35 Hankook V12

*height matched to tires

Rear:
18x10 (+38mm) -3 cam. height is 25 1/4 (total), 3.5" Lip
265's Hankook V12

Really glad the way this car turned out and even happier with the owners excitement! We will be posting our own writeup of the car soon :)

-Matt
Rev Works

Can you get them in black or is that extra?