*** Aggressive wheels? Post them up! *** Thread
 

I realize we don't have a thread for BRZ/FRS with aggressive wheels set-up. Many other forums have a consolidated thread for cars with aggressive wheels so why don't we have one right? I'm big fan of having aggressive wheels, and no, it doesn't necessarily mean it has to be slammed and hellaflushed. It can be just slightly lowered and with fat tires as well. So instead of going each member's build thread and check, let's have one consolidated thread so owners with aggressive wheels share their set up. We can also ask questions about offsets, width, tire sizes, etc. as well.

Requirements for aggressive are:
- Low offset wheels that sit flush with fender or poke a little.
- Stretched tires or fat tires don't matter since everyone has a different view about this.
- Slammed or slightly dropped don't matter neither since everybody has a different view about function > form or vice versa. It doesn't have to be slammed to be aggressive IMO.

***Disclaimer: I don't have an BRZ/FRS yet. Still waiting for more news and info of what is going to happen in 2014.

Pick your rocket bunny car and post. Chances are it's pretty damn aggressive.

^ My rocket bunny car? :iono:

18x10 +12
18x10.5 +17
225/40/18 all around
Roughly -6 degrees camber
Extensive fender mods

http://cdn2.mkimg.carview.co.jp/mink...t=b0082b4b2864

http://cdn2.mkimg.carview.co.jp/mink...t=b0082b4b2864

http://cdn.mkimg.carview.co.jp/minka...6f2a9517a0.jpg

http://cdn.mkimg.carview.co.jp/minka...d4a2b7df97.jpg

http://cdn.mkimg.carview.co.jp/minka...64a59a2994.jpg

Ebphoto's car . Hope he doesn't mind me sharing. ;)

18x9.5 +25
225/40/18
front rolled/slight pull and rear was pulled

http://farm9.staticflickr.com/8457/7...9e833d8c_c.jpg

http://farm9.staticflickr.com/8174/7...ebaa339d_c.jpg

http://farm9.staticflickr.com/8359/8...e578730f_c.jpg

Ill roller's car

18x9.5 +38
Front: 225/40/18
Rear: 255/35/18

http://farm9.staticflickr.com/8355/8...1dcae97d_o.jpg

http://farm9.staticflickr.com/8487/8...bb68cfb3_o.jpg

http://farm9.staticflickr.com/8224/8...3e937419_o.jpg

18x9.5 +30
225/40 front and 245/35 Rear

http://25.media.tumblr.com/tumblr_m5...lclo1_1280.jpg

http://i57.photobucket.com/albums/g2...2/toyota86.jpg

19x10.5 +32
235/30/19

http://farm9.staticflickr.com/8485/8...7e9334f0_b.jpg

http://farm9.staticflickr.com/8337/8...a49cbcd0_b.jpg

http://farm9.staticflickr.com/8207/8...56c9a890_b.jpg

http://farm9.staticflickr.com/8487/8...e406607f_b.jpg

http://farm9.staticflickr.com/8337/8...a7fe1ea4_b.jpg

http://farm9.staticflickr.com/8477/8...a1520c94_b.jpg

AE86guy's car.

18x9.5 +40 (front has 5mm spacer)
265/35/18
No fender mods

http://i49.tinypic.com/b87dqw.jpg

http://i46.tinypic.com/34ipgeq.jpg

Do you know if any fender work was required on these? They look great!

Sure, I edited the posts showing the fender work that was done to the cars, as far as I know. If it's blank, it's cause I'm not sure.

Nice start on this thread Larry!

Wow! They did an amazing job, can't even tell it was done from what I can see.

cool thread. not extreme as above, but i like the fitment. new alignment is much nicer than these older photos as well. my setup is 18x8.5 +30/+40, not as aggressive as the above, but its flush, no poke.

http://farm9.staticflickr.com/8449/8...6b356800_z.jpg
+30 rear by jszumita, on Flickr

http://farm9.staticflickr.com/8455/8...c67df82d_z.jpg
top1 by jszumita, on Flickr

http://farm9.staticflickr.com/8182/8...60593731_z.jpg
top2 by jszumita, on Flickr

So is 9.5 considered aggressive on 86? What size would be the perfect for tracking? Ive seen people 9.5 racing on their brz

17x 8 or 9 depending ob offset

IMO as long as you have the right offset, it will look aggressive. Of course wider wheels tend to look more aggressive ;)...

Keep it going guys.

@ Larryw: :thumbup: for the contribution...

WedsSport 86/BRZ Special Edition Gunmetal TC105N
 

- HRE 540 19x8.5 (Falken 452 215/35); 19x9.5 (Falken 452 235/35), low 30's.
- RSR coilovers (That's as low as it goes in the front...there's more adjustment in the rear)
- Apexi exhaust
- JDP CF front lip

http://i1179.photobucket.com/albums/...dd/file-28.jpg

http://i1179.photobucket.com/albums/...dd/file-29.jpg

http://i1179.photobucket.com/albums/...dd/file-26.jpg

http://i1179.photobucket.com/albums/...dd/file-27.jpg

18x9.5 +33
http://i373.photobucket.com/albums/o...78FF8C3693.jpg
http://i373.photobucket.com/albums/o...791A8CCF61.jpg
http://i373.photobucket.com/albums/o...794F7CA993.jpg
http://i373.photobucket.com/albums/o...796651565E.jpg

Larry, you know if car in post #7 has fender work?

Love this look. Can't wait to get my rpf1s mounted. What size tires and what's the alignment like?

Also nice tasteful job on the splitters front and sides.

i have these, love em

Wow, looks amazing :thumbup:

Fronts should be fine. Rear lips are likely rolled.

The sbc rpf1 offset is 38 not 33. Looks awesome tho

Sent from my SPH-L710 using Tapatalk 2

+ 1! Love those wheels

RPF1 18x9.5+38
 

Enjoy

Hm

this thread is full of win!

:confused0068:

For a few seconds I thought that Redbull car was real, then I saw the electrical socket LOL

18x9.5 +30 225/40r18 rt615ks
http://royal-origin.com/wp-content/u...9/IMG_9993.jpg

LMFAO.... nice. Great thread btw

Nice RC Car. notice the outlet in the background.

Yes i know its my friends.. Rf drift championships

Love most of the wheels I see. Some.. just doesnt do much for me, but thats just me. I know later Im gonna get some new wheels, but thats way later. Good thread though.

Not exactly low offset wheels but they're spaced out to sit flush with the fenders, and its dropped on Megan coils
Attachment 27979

+33 because 5mm spacers, luckily I get paid for thinking for people lol