![]() |
how to turn that rear triangle reflector into working brake light
I found this how-to guide on his to do this here
Quote:
But there is a couple things to add If you want your new brake light to stay lit and get brighter when brakes ar pressed connect to the wire that it shows in the guide, but if you want to have it only light up when brakes are pressed this is how Disconnect the 4 pin plug from the left brake light, peel back the plastic protector, find the solid green wire and that's where your positive wire needs to be connected, you can strip a little section and solder the wire to it or use on of those quick crimps. Also you do not have to pull the existing harness out the way he does just run your wires and zip tie or tape your new wires to the old ones The two silver screws on top of the reflector are a bit tricky to get but just work at it, they are 3/8in screws or Phillips screwdriver I also wired up a toggle to kill the light when I feel I dont need it just buy a basic toggle and cut your power wire, put some wire connectors that fit the toggle on each piece of the cut hook it up and your good to go I've completed mine and will add a link to a video when it's darker to show y'all mine |
Well there was a guy on here doing retrofits until the mods got overzealous and banned him.
I'll see if i can help you out |
cool beans
|
Very nice!:thumbsup:
|
Quote:
|
Quote:
https://www.youtube.com/watch?v=ycS5...e_gdata_player |
Good work. I'd honestly prefer turning it into a rain light for track use that flashes on it's own every .25 seconds. I assume the process would be similar?
|
Quote:
[ame="http://www.youtube.com/watch?v=ycS5aTbF9I0"]Scion fr-s backlight #2 - YouTube[/ame] |
Quote:
If you have any questions just pm me |
Quote:
|
Wait wait wait... You're from Beaumont, TX and you have a Québec license plate? lol
You sure travelled far to get screwed on taxes and registration fees. |
Quote:
|
Quote:
no i found this diy and shared it, added a little bit |
Quote:
|
Is there anyone who imports all the OEM stuff for this? I'd only want it if it would function like the OEM Foglight, only turning on when the foglight stalk switch is turned.
|
Nice write up! :thumbsup: now I gotta do this haha
|
Thanks for posting this up Chris. I decided to use a GM 3157 socket and white LED bulb. LEDs match up really well with the rest of the lights.
http://i805.photobucket.com/albums/y...stall_Edit.jpg http://i805.photobucket.com/albums/y...Viper_FRS2.jpg |
FYI, if anyone want to save the hassle to drill the Scion housing.
We have the Toyota 86 Fog light housing available Toyota 86 Fog Light housing |
Quote:
Sent from my SGH-T999 using Tapatalk 2 |
Did this tonight with some custom LED's i built, turned out awesome! Wired mine up to only come on when the brakes are applied.
|
for $200 I will go take my chances with the dremel and drill bits..
|
Cost me about $25. My bulb was $18. You have to do the same amount of work in the end if you get a rip off kit. Hell, I'ld make a kit and sell it for $50 shipped if anyone is interested.
|
Is it possible to splice the wires to the front fog lights (BRZ limited)? So you have the option of turning it off/on?
|
is it legal to use this as the 3rd brake light in CA? im planning to use the 3rd brake light delete DIY and use the triangle light as the 3rd brake light
|
Quote:
Quote:
|
Quote:
Quote:
|
Quote:
|
Quote:
|
Quote:
Personally I'd tie it into a switch and use it as a fog light. |
this is sweet! nice find!
|
| All times are GMT -4. The time now is 11:45 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
User Alert System provided by
Advanced User Tagging v3.3.0 (Lite) -
vBulletin Mods & Addons Copyright © 2026 DragonByte Technologies Ltd.