BRZ Polyurethane CS Side Skirts
 

UPDATE: 12-12-12 ***BACK IN STOCK***

Found these on Ebay... Might be a nice option verses the more expensive alternatives that are currently on the market, namely the original STi version.

http://www.ebay.com/itm/350667506758...84.m1497.l2649

For anyone that has HT Autos STi lip and rear spats like myself, these should pair up nicely :thumbsup:

They also offer an STi inspired front lip here...

http://www.ebay.ca/itm/2013-Subaru-B...69842e&vxp=mtr

Nice find

CS = Chargespeed replicas. Debating if I should order a set.

A replica of their CF sideskirts you mean ? Don't know if CS offers a Polyurethane sideskirt. I'm gonna try out a set, price is right :thumbsup:

I guess HT Autos STi inspired front lip/rear spats would also be concidered replicas. I have them and the quality seems great!

Will they also plan to develop the rear spat (lip) roof wing (spolier) which like Charge speed?
Thanks

Any idea how these are mounted/installed? I'm assuming they'll work with the JDM underpanels?

Bayson R also made a prodrive replica piece for the 2002/2003 WRX, so fitment should be good.

Yeah they should mount on stock under panels just fine. If you look closely at the side skirts, you can see all the the pre-drilled holes where they'll be secured :thumbup:

Sent from my Nexus 7 using Tapatalk 2

Price is good even cheaper than HT auto. I am seriously thinking...

HT don't have the body pair, front and rear only.
This CS..don't have the rear pair yet.
The real charge speed, not really worth that much.
Sti, I don't really like the little body warp in front of the rear wheel.

I am looking for whole body kit (front lip, side skirts, rear spat and roof wing (optional) in PU or PP or ABS for BRZ for a very long time.I cannot understand why all the brands which you list above are all short one of the items.

HT Auto does not have side skirts.
Bayson R does not have rear spat
STI does not have rear spat.
><

Haha, good to see someone think the same...

I compare the eBay photo with HT auto pics under another thread, I think I wait for the HT set. The HT one has a more aggressive and mean front look, and the 2 sharper points in the middle part is nicely matched with the BRZ base shape.

My last PM to HT auto to inquire about the side, their response is "difficult to find a car in UK to do test fitting...."

Any GT86 Member from Great Britian reading this?

The Front Lip for BRZ: I personal prefer STI>Bayson R > HT Auto
I agree that HT Auto have more aggressive front looking, but the problem comes from the conner.
http://subarukits.com/prod_desc_brzlip.html?sno=298
It looks like two layers hamburgers for me.
The STI one fold up in the corner, so it looks more like integrated together.
http://www.sti.jp/parts/catalogue/brz_zc6/ST96020AS000.html
The Bayson R is in between.
Side Skirts: I am not sure.
I prefer the step like more than the bottom line before.
Something like Toyota 86 OEM one.
http://www.ft86club.com/forums/showthread.php?t=14209
I prefer a little bit more aggressive, because have already spent the money.
The bottom line is too miner and looks not too much different with and without.
However, I am not sure now. Sometimes the bottom looks nice and clean, but the step like
one looks heavy which makes car like transformer.
Ex. http://www.c-west.co.jp/aero/brz/ss.asp
Rear Spat: I also not sure now, because there are not too many option for BRZ in PU or PP or ABS.
Especially, I have OEM rear diffuser there. I am not sure which one can with the OEM rear
diffuser accessory without modification.
HT Auto did provide the information and their can fit withOEM rear
diffuser.
http://subarukits.com/prod_desc_brzrearlip.html?sno=298
However, the spat is really very tiny. I am not sure that it will looks better
compared without.
How do you think?
Thanks.

I personally like the STi lip overall compared to the others. But I have HT Autos front lip and rear spats and they're still very nice. Really love the flares on the original STi lip though. I don't see a whole lot of difference between Bayson R's front lip as to HT Autos which is slightly more aggressive
It would come down to price for me between the two if I didn't already have one :thumbsup:

btw STi Front Lip is $460.39 Plus Shipping at japanparts.com

STi

http://imageshack.us/a/img198/5426/t...8799176483.jpg

HT AUTOS

http://imageshack.us/a/img203/4016/k...k5bqhcz6by.jpg

Bayson R's

http://imageshack.us/a/img809/9321/flippubrz13cs4.jpg

Thank you. I want sideskirts like this hella bad, but have only found them in cf basically. These are perfect.

It is too bad that the front lip does not fit on the FRS. Do the skirts?

FRS and BRZ are the same on the sides and rear, just the front bumper different therefore side skirts shall fit on both.

The Bayson R’s front lip might more close to Charge Speed on, so they called CS style.
http://www.chargespeedusa.com/#/item/charge_speed_2013-2015_subaru_br-z_bl_cf_front_lip/
STI have already released the GURNEY FLAP, SIDE UNDER SPOILER PAIR, STI: FRONT UNDER SPOILER
and SKIRT LIP (addition rubber to add on the front lip).
Potentially might also release the rear spat ( not sure which can fit with the OEM rear
diffuser accessory well without modification or not)
http://www.ft86club.com/forums/showthread.php?t=15582.
However, the japanparts. com shows the price is exclude (tax and charges)
(Air to door for example)
http://www.japanparts.com/delivery.htm
I am not sure how much additional money need to pay than the price on the website.
Secondly, I do not have garage and BRZ is my first can. I do not have experience to installed theses body kits by myself. The install instruction is written in Japanese. The local body shop might cannot understand.
Could you take some pictures with different angle with your HT Auto rear spats?
Thanks a lot.

I can't say for sure, as long as the contour is the same I can't see why not. However the pre-drilled holes may not line up or be the same as the FR-S
But if they fit, worse case scenario would be to re-drill holes

Might be worth messaging them before committing :thumbsup:

I think it is a little too busy, too much where the 3 lines meet at the rear bottom: the point that spat meets the diffuser and happen to be the curve line come down from the top, the black part.

Somehow I have this fear these kids on the street will stand on that spat...

Yeah I also have the STi gurney flap, just need to install it and my HT Auto front lip. The rear spats are installed and I will snap a couple pics when I get time, unless someone else here has some pics on hand of them installed ?

Installation is very straight forward on rear spats and gurney flap as I would suspect the side skirts are also. The most entailed install would be with the front lip as you need to remove some undertrays and drill holes.
If you search the forums here, you'll find some detailed pics and install instructions done by others ;)

One big reason to go for Sti for over $500 shipped is the little logo!

"STI"

Need to think.

Or you could just go buy an STi badge off ebay for $15 and call it day! :bellyroll:

On a side note, the legit STi sticker that came with my gurney flap from japanparts.com is a joke in comparison to the one I bought off ebay :thumbsup:

http://www.ebay.com/itm/Impreza-STi-...7de136&vxp=mtr


Don't get me wrong, there are some things you just can't compare or replace with against some STi goodies. For example, I just ordered Colin smoked LED tail lights from japanparts that I could not find anywhere else. So I paid through the nose, including insane shipping charges to get what I wanted. But in the case of front lips, rear spats and side skirts, we have other options that are very comparable at a fraction of the cost :thumbup:

Unless of course japanparts is using a different variety of "High Quality Polyurethane" than what others are using ?? ;)

Hahaha... I almost thought that little badge cost $250. This brand name premium thing is very -Louis Vuitton.

I also thought that rear diffuser, rear spat and rear bottom line should align well.
However, I saw the SEIBON’s result is totally not match what I thought.
Maybe I am a old style guy. ><

Are those HT Autos rear spats ? Mine don't stick out that far, I'm positive!

Looks like they are using a CF variant of some sort for rear spat as it's higher up and extends out further than HT Autos rear spat

Pretty sure I've seen oem diffuser and HT Autos rear spats together and it looked pretty good

http://farm9.staticflickr.com/8296/7...cea70749_o.jpg
http://farm9.staticflickr.com/8306/7...9caa7227_c.jpg
http://farm9.staticflickr.com/8174/7...9231c8a7_c.jpg

No, this is SEIBON’s result.
I just try to response "86BRZ" that I also thought the rear spat, diffuser and the bottom
line of the car should align well. However, I saw SEIBON design, The bottom line of rear
spat is front than the diffuser.
The only other HT Auto rear spat picture which I fought in this forum might be this.
Thanks.

Perhaps STI will never come out some rear spat for the rear because they have diffuser already.(?) now the close up pics showing the corner roundness of the spat and the diffuser not really from the same style, but they point together, that's the part I am picky about.

Sorry guys...picky me.

I thought tht they will from two links as below

1.http://www.ft86club.com/forums/showthread.php?t=15582.

2. http://www.sti.jp/parts/catalogue/brz_zc6/index.html (The rear has

spats on it)

However, I do not know that can fit well with OEM diffuser well without

any modification or not. I never see any picture with OEM rear spats and

diffuser together.

Thanks.

http://www.sti.jp/parts/catalogue/brz_zc6/ST96020AS000.html
http://www.sti.jp/parts/catalogue/brz_zc6/ST96030AS020.html
http://www.sti.jp/parts/catalogue/brz_zc6/ST96010AS000.html

I cannot read Japanese, but I put it on Google translator.
It looks like the OEM one is functional not only for the looking and also did the test.
I am not sure that is true or not and I also not sure others are also functional or just for look. Thanks.

Looks like everything but the front lip should fit an FR-S and I like a different front lip anyway.... nice

Even if they are functional, which STi stuff tends to be, 99% of us will never know. Either it is a small amount and/or we will basically never see those speeds unless at a track (is STi wing from WRX becomes functional at 117, but damn could you tell). Not sure if we could notice side skirts. So if you have a track car tour looking to spend a lot for function, but most of us just want and need the looks.

Unique LED tail light, do you mean something as below?
http://www.ft86club.com/forums/showt...t=15927&page=6
http://www.ebay.com/itm/New-LED-JDM-...704226?vxp=mtr
Thanks.

Yep that's them! I see the seller is out of japan. I saw this before I bought mine, but price including shipping was better from japanparts :thumbup:

Not too mention, those are specific to the FR-S
I ordered a set for BRZ ;)

Sent from my GT-I9300 using Tapatalk 2

A closer look of the STI and SEIBON rear spats, both have the extra bumper overlap, make it a "L" shape, whereas the HT Auto only a flat piece. I think the extra "black" upper cover a few inches make it less "point together but. Or line up"?

I am not sure which style looks better, but there are also some not “L shape” rear spates in the market.

pic1: APR Performance
pic2:TRUST
pic3:Chargespeed
pic4:Tamon Designs

Just ordered those side skirts and the HT Auto's rear spats to finish up our BRZ. We have the HT Auto's lip on it already. Will be sure to post up pictures.

HT front, Bayson R side skirts, and the HT rear spats is one of the combo I am considering, please post details pics, interested to know how their black material match to each other and if their edge roundness match, etc.

Another set considering is STI front + ? Skirts + ? Rear

Why you are not considering
1. STI front + STI side + ? rear or
2. Bayson R front + Bayson R side + ? rear

I t might will less mismatch issue, if you all buy from same brand as much as possible.
Third possibility might push HT Auto to develop the side, Bayson R rear and STI rear. ><
Thanks.

I'll have the same setup :thumbsup:

Just got tracking. Side skirts won't be here till Friday. Damn Thanksgiving.