Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB

Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB (https://www.ft86club.com/forums/index.php)
-   Engine, Exhaust, Transmission (https://www.ft86club.com/forums/forumdisplay.php?f=8)
-   -   Which Transmission ? (https://www.ft86club.com/forums/showthread.php?t=20)

gatchaman 10-12-2009 09:24 PM

Which Transmission ?
 
I haven't seen any info posted on what transmission the FT-86 could get yet. I saw that the ADVICS brakes on the car is from a Toyota - Aisin joint venture. Anyone think that the FT86 will get the Aisin 6 speed then? Its used in the MX-5, RX-8 and S2000 so that would probably be a good choice.

Matt 10-12-2009 09:45 PM

Yes, that is what I've read. The Aisin 6 speed.

86Fan 10-12-2009 10:46 PM

I wonder if this car will have an auto trans.

Kenji 10-12-2009 11:19 PM

Quote:

Originally Posted by Matt (Post 165)
Yes, that is what I've read. The Aisin 6 speed.

Heres the inevitable power hungry modder's question -- how much power can the Aisin 6 speed tranny handle?

86Fan 10-13-2009 12:19 AM

If the Toyo is using the AY6 then it can at least handle 273 lb-ft since it's currently used in the Camaro V6 and some other cars.

It should definitely handle the torque from a 2L turbo.

From wiki: The AY-6 is a 6-speed manual transmission manufactured by Aisin. It is designed for longitudinal engine applications and can handle up to 345 ft·lbf (468 N·m) of torque.

Or it could be using the AZ6 which is an older transmission.

White Comet 10-13-2009 02:16 AM

Well, it's going to have a variant of Subaru's awesome 2 liter boxer engine, but I hope that means it won't have that engine's weak 5 speed tranny. I own a WRX, and I granny shift the car to prevent problems. I miss that about my old Z. I could drive it like an ass, and that tranny would take it in stride. :D

Jordo! 10-13-2009 02:42 AM

Aisin 6MT and 6AT

CoreDump 10-13-2009 03:56 AM

Quote:

Originally Posted by Jordo! (Post 180)
Asin 6MT and 6AT

Any chance for a dual-clutch type sequential manumatic?

Jordo! 10-13-2009 07:24 AM

Quote:

Originally Posted by CoreDump (Post 182)
Any chance for a dual-clutch type sequential manumatic?

Not that I've heard, but it's all still up in the air.

Toyota's been really sketchy with the details. The assumption of Asin trannys is based on what's available from the Subaru parts bin to mate up to the EJ20.

I suppose if Subie has been working on an SMG, it's quite possible. I'd definitely shell out for that.

86Fan 10-13-2009 01:38 PM

No way this car gets dual-clutch. The trans would probably cost a lot to develop and Aisin hasn't even developed a dual-clutch yet.

JDMinc 10-13-2009 07:04 PM

Quote:

Originally Posted by gatchaman (Post 162)
I haven't seen any info posted on what transmission the FT-86 could get yet. I saw that the ADVICS brakes on the car is from a Toyota - Aisin joint venture. Anyone think that the FT86 will get the Aisin 6 speed then? Its used in the MX-5, RX-8 and S2000 so that would probably be a good choice.

Anyone here driven the the MX6 and RX8? How'd you like the feel of the shifter? I've driven an s2000 and it felt great, one of the best shifting trannys I've ever experienced actually.

Quote:

Originally Posted by 86Fan (Post 195)
No way this car gets dual-clutch. The trans would probably cost a lot to develop and Aisin hasn't even developed a dual-clutch yet.

I agree theres no way we see a fancy DCT type transmission in this car.

RadOnc 10-14-2009 12:29 AM

Quote:

Originally Posted by 86Fan (Post 175)
If the Toyo is using the AY6 then it can at least handle 273 lb-ft since it's currently used in the Camaro V6 and some other cars.

It should definitely handle the torque from a 2L turbo.

From wiki: The AY-6 is a 6-speed manual transmission manufactured by Aisin. It is designed for longitudinal engine applications and can handle up to 345 ft·lbf (468 N·m) of torque.

Or it could be using the AZ6 which is an older transmission.

Thanks for the info!

Most transmissions wouldn't have a problem but many of us are hoping for an uprated system from the factory so that we can do power upgrades without any fear for the transmission. I could see people putting some very large blowers on this motor.. The AY6 sounds perfect! and we'll let the camaro guys learn the limits of that drivetrain ahead of us :)

MR2fan 10-14-2009 06:31 PM

Quote:

Originally Posted by 86Fan (Post 175)
If the Toyo is using the AY6 then it can at least handle 273 lb-ft since it's currently used in the Camaro V6 and some other cars.

It should definitely handle the torque from a 2L turbo.

From wiki: The AY-6 is a 6-speed manual transmission manufactured by Aisin. It is designed for longitudinal engine applications and can handle up to 345 ft·lbf (468 N·m) of torque.

Or it could be using the AZ6 which is an older transmission.

Hows the reviews on the Camaro V6's transmission so far?

86Fan 10-14-2009 06:41 PM

Quote:

Originally Posted by MR2fan (Post 350)
Hows the reviews on the Camaro V6's transmission so far?

I dont' see any negative reports on their V6 manual so it looks to be good. The V8 trans had some issue but that's unrelated to Aisin.

aspera 10-29-2009 07:00 AM

Sorry if this is a dumb question, but...what 6 speed manual does Toyota use in the Lexus IS 250?

newsuby_02 10-29-2009 01:48 PM

i also hope for 6 speed anything less just wouldnt be as fun and as for how that tranny shifts i have drove the s200, rx8, and mx6 and all shift like butter defiently the best i have ever felt


All times are GMT -4. The time now is 08:46 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
User Alert System provided by Advanced User Tagging v3.3.0 (Lite) - vBulletin Mods & Addons Copyright © 2026 DragonByte Technologies Ltd.


Garage vBulletin Plugins by Drive Thru Online, Inc.