Vivid Racing CF front diffuser and trunk spoiler!
 

Our Project Scion FR-S just had a nice little photoshoot done to show off our new Agency Power carbon fiber accessories we have developed. So far, this little RWD rocket has come along way nicely. Since receiving the car as part of the First 86 in May, we have been hard at work developing parts. Our exhaust system is one of the most popular out right now for the FR-S and BR-Z. In addition to the exhaust, we have also developed a header, front pipe, lightweight crank pulley, and short ram intake. Thanks to Subaru, the rear suspension is the same as the GH Subaru STI so the Agency Power rear control arms, sway bar links, and sway bar fit perfect! Our new Agency Power carbon fiber kit includes a front lip that gives the front end some additional curves and brings the narrowed front bumper out a bit. The sloping lip reminds us of the popular Liberal body kit from the Bugeye Subaru days. Carbon fiber accents were done on both the mirror covers and side panels. To match the newly updated front, we created a clean trunk lip spoiler that was not to over the top but swept well with the Scion FRS lines.

Stanced on a set of KW Coilovers with Gram Lights wheels, this Scion FR-S also has our very popular Agency Power shorty antenna and shift knob in place for the 6 speed gear box. Enjoy these photos while they last, this FR-S is headed to the mod room to get a make over for the quickly coming 2012 SEMA show in Las Vegas!

http://www.vividracing.com/blog/wp-c...cy_power-2.jpghttp://www.vividracing.com/blog/wp-c...cy_power-4.jpg
http://www.vividracing.com/blog/wp-c...cy_power-8.jpghttp://www.vividracing.com/blog/wp-c...cy_power-6.jpg
http://www.vividracing.com/blog/wp-c...cy_power-1.jpg

Coming soon! I will keep you all posted on official release and pricing!

Ride is looking fantastic, I think my that's my favorite wing ive seen so far, will be looking out for pricing and more info on it.

http://www.vividracing.com/blog/wp-c...cy_power-8.jpg

Doesn't look like the spoiler is attached properly on the edge of the trunklid. Otherwise looks great.

More pics???

spoiler would look better if it was about half as tall, and the fitment...

Looks clean!

I disagree with you on the height of the spoiler. If you look at the front lip, you can see that it protrudes quite a bit at the bottom, so I think the spoiler evens out the front/rear. The 3rd pic isn't the best angle to showoff that spoiler, but I will reserve judgement until I see more pics. But I will say, FINALLY someone comes out with a clean, simple front lip! MORE PICS PLEASE! :w00t:

Spoiler height is just fine. No pics of the front lip though?

No pictures of the front of the car :(

from the side, the diffuser doesn't appear to be straight.

its looks like it shoots down at an angle away from the body line.

like the spoiler.

Kit looks great. Time to start saving up for this. More photos please.

Clean, simple front lip check out the downforce one from Evasive.

That one is too simple for my tastes lol. I prefer a full lip vs splitter type. Been waiting for a lip like the one below and Vivid came closest so far. I appreciate the tip though!

http://i1107.photobucket.com/albums/...cionFRSlip.jpg

Awesome wheels
Specs on them?

price?

Very aggressive look!

I agree. I love the aggressive rake but how it slopes into the side doesn't quite look proportional to the rest of the car. Bummer! It would have been top on my list. From the side profile picture, it's all win though!

Also, love the look of the exhaust but the Y-pipe looks like it hangs pretty low. Anyone scrape this on anything yet? Not sure why it has to hang that low.. there's a relief cut in the rear crossmember to route the exhaust I thought.

Pricing?

Geez you guys are tough! These are the very first protypes, and only ones in existence so they are still getting some massaging here and there. I will have plenty of pics from all angles soon when we officially release the parts as well prices.

Thanks Guys!

Just trying to help (I hope i'm helping) because I REALLY WANT THESE. If you can straighten out that corner radius i'd seriously be all over that rear wing. I like the aggressive rake. I like that's its CF. I'm hoping it's a stick-on (no holes). But that weird round edge is a dealbreaker. If other folks like it by all means make it and sell it! I'll continue waiting.

BTW.. if you guys make a close replica of the factory BRZ Limited rear diffuser in CF I'd throw money at you right now.

if you guys can make a cheaper version of the Tamon style lip i'm pretty sure youll make a bunch of people on this site happy including myself:w00t::w00t:
http://i33.photobucket.com/albums/d7...pse4f29eb0.jpg

Pictures of the bottom of the diffuser or is it just a lip? IMO there is a huge difference between the two.

RYU hit the nail. That's exactly what I thought looked funky on the spoiler. Vivid, if you guys re-shape those areas and straighten out that front lip so it's level with the body/side skirts and price em fairly, these will sell like hot cakes!

looks nice :thumbup: ... is it not just a reflection causing the funny angles on rear spoiler

I'd like to see more pictures of the front lip.

the boot lid. there is but i'm hoping someone makes like a cheaper version of it because to me that shape is perfect!!

+1

http://file028b.bebo.com/1/large/200...556806820l.jpg
If you can make the edges flow like this on the back I think we'd have a clear winner!

I was talking about the front diffuser/lip

Sorry for quoting the pic but really wanted to make sure you caught my question of, "where did this come from?" I love the wings.

No worries, it's a photoshop (not mine) that has been floating around for a while.

I just want to say thank you for whomever came up with this photochop. Those nasty FR-S/GT86 "fangs" was what sealed the deal with the BRZ for me. Those OEM fang things are hideous! Anything to smooth out that front lip would be such an improvement.

http://i1107.photobucket.com/albums/...cionFRSlip.jpg

No worries guys, I will pass all this along to AP as well. I do appreciate the input as well, just ball bustin a little bit with ya.

I want that info too! Anyone have any ideas? Also what models are they? They look like 57Xtreme, but I don't see the holes in the spokes.

I'll take the hideous fangs over that goofy smiley mouthpiece you guys call a front bumper anyday! :bellyroll:

what are wheel size and offset and tire and size?

Gram Light 57 Extremes 19×8.5 +35 front and 19×9.5 +43 rear

Also...

http://www.vividracing.com/blog/wp-c...sc_6901a_0.jpg

http://www.vividracing.com/blog/wp-c.../dsc_6900a.jpg

http://www.vividracing.com/blog/wp-c.../dsc_6909a.jpg

These are all test fit pictures as well.

Front lip looks so clean and flows with the body. Will you be selling painted front in the future or will it be cf for now

great. and what tires and sizes?

does the lip come in frp version?

Can't tell by pics but did they fix the 86 badge? I remember when the photos were 1st found and posted on here the close up of the fender piece showed the 86 piston badge upside down.

CF looks soo sexy but too much $$$ for me

Front splitter sticks out waaaaay too far. And the spoiler looks....not good...looks very amateurish...maybe it's the pics?