Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB - Wheel Directory: Work Emotion XD9 18x9.0 +38 / 18x10.0 +38

- Wheels | Tires | Spacers | Hub -- Sponsored by The Tire Rack (https://www.ft86club.com/forums/forumdisplay.php?f=24)

- - Wheel Directory: Work Emotion XD9 18x9.0 +38 / 18x10.0 +38 (https://www.ft86club.com/forums/showthread.php?t=15446)

Wheel Directory: Work Emotion XD9 18x9.0 +38 / 18x10.0 +38

Those rear control arms are wild looking

yeah, we started at -5 and settle on -2.5

Where can we find these GTSpec parts for the BRZ? Looks great!!

please dont shoot me for asking but i thought i knew rim offset inside out... How can u be +38 and still have 3" lip.... I thought lip amount was totally dependent on how low u run the offset i.e lower offset = more poke (as some call it) = more lip???

and please i beg of u give me a detailed answer because i never want to embarrass myself so much EVER again publicly..

thanks in advance.....

That "lip" is a combination of wheel style, offset and overall width.

If the wheel is 10" wide, it's either got to have serious "lip" or serious curve on the spokes (unless the offset is +60).

Now go back to bed, it's still early there.

Quote:

Originally Posted by FT-86GOD (Post 398240)

On one piece wheels, lip size are based on the preset style/face of the wheels. Not the offset.

On two piece and three piece wheels, lip size are based on offset.

But what about watanabe Magnesium race rims for example? there one piece rims and there lip is totally determined by the offset?

Quote:

Originally Posted by FT-86GOD (Post 398288)

But what about watanabe Magnesium race rims for example? there one piece rims and there lip is totally determined by the offset?

each wheel lines are different. Watanabe uses different production mold for each offset, hence they are expensive.

Well this makes absolutely no sense to me. If the face of those work rims are +38 and there 9inch they are VERY sunk into the arch regardless of the lip..

Hopefully someone can explain it for me at length because this is the first I've heard of anything like this, especially 1 piece offset being different to 2 piece lip being an extension to that etc..

I'm not trying to be difficult... I just thought I had my head around all this stuff

18x9.0 uses the one mold. 2" lip. To achieve the offset, WORK shaved the inside hub.

18x10 uses another mold with 3" lip.

where can i purchase those arms?...

This is the kind of content I've been waiting for.

Loving those GT Spec parts.

White XD9s are the hotness!

Bingo! WORK Emotion XD9 - 18x9.0 +38mm (2" Lip) is teh hottness!

Another option to consider......

First world issues................sigh

thats beautiful! just a suggestion... how about painting the wheels to match the pearl a little? maybe and off-white?

all the car needs is an turbo! :party0030:

yes, 10" looks so good in the back

are these available in a polished special order

How does it drive in a staggered setup compared to stock?

Everyone asking about the GTSpec Parts just go to GTSpecs website, or this companies if they offer the parts

dig the strut brace. lovely.

Looks good! I almost regret buying a blue car when I see those pictures. :thumbsup:

Quote:

Originally Posted by S2kphile (Post 399255)

How does it drive in a staggered setup compared to stock?

Can't give a true evaluation, only drove 22 miles with the stock setup then this happen.

Quote:

Originally Posted by subatoy (Post 399166)

thats beautiful! just a suggestion... how about painting the wheels to match the pearl a little? maybe and off-white?

all the car needs is an turbo! :party0030:

Yeah we are planning to paint it pearl white after wekfest NJ this weekend.

Quote:

Originally Posted by igorot (Post 399209)

are these available in a polished special order

No, only silver, bronze or white.

Added to the Wheel Directory:
http://tinyurl.com/86wheels

white on white!! ftw

Looks...
F A N T A S T I C.

GTSPEC parts look the deal.

Thanks @RavSpec for sharing the Specs.

18s look perfect...just curious, how much clearance was available to fit 19s in the same specs?

Probably ok, still a lot of camber adjustment possible.

My god. That white POPS! Looks great!

I am thinking of going with the exact same set up only in bronze on the whiteout fr-s. Glad i stumbled across this post because that fitment is on point and is exactly what I want. Car looks sick.

Quote:

Originally Posted by sdwztofu (Post 442050)

I am thinking of going with the exact same set up only in bronze on the whiteout fr-s. Glad i stumbled across this post because that fitment is on point and is exactly what I want. Car looks sick.

Cool, let me know we can package the wheel with coil over :)

Quote:

Originally Posted by RavSpec (Post 442091)

Cool, let me know we can package the wheel with coil over :)

I will keep that in mind I think I am going to go with fortune auto coilovers because they are local to me and work with are car club with discounts and so on. :thumbup:

Re: WORK Emotion XD9 - 18x9 / 18x10 with GTSPEC

I have to ask where you can get these wheels. We can only find them available in the 5X114.3 at the stagger sizes that you have on yours. The FRS comes with a 5x100 ??? How does this work out. Did you use a bolt pattern adapter? We want this exact setup for the Turbo FRS that we are building to sell in order to get enough traction for the expected horsepower.

Quote:

Originally Posted by ScionofLewisville (Post 526908)

You can order them from Ravspec, they are working from home with the storm coming in but email is sales@ravspeconline.com