2022+ Exhaust compilation thread
 

I wanted to create a new thread to compile the exhaust options for the 2nd gen cars going forward. This thread is intended to include cat backs and axle backs, Headers and front pipes we can save for a separate thread. Generally catbacks will fit on all cars. Axle-backs only fit on the date range they were designed for, as 13-16, 17-20, and 22+ all have different midpipe to muffler connections.

If you find new clips or info about compatible exhausts, feel free to reply to the thread and I'll add to/edit the original post.

APEX Integration:
APEX'i N1, catback
https://youtu.be/WVuQwKjRTk4

AVO Turbo World:
AVO Turbo World catback
+6HP, +10LBF (with catted front pipe)
https://youtu.be/5_Un7H6kHbA


Fujitsubo:
Authorize S axleback? sounds like a single muffler system, still under development iteration
https://twitter.com/fujitsubo_exh/st...70469489184773

HKS
HKS Spec LII catback
https://youtu.be/FGs76FwZMwk

HKS Legamax Premium axleback
https://www.youtube.com/watch?v=yM3U1mfZhCU

Kakimoto Racing
Regu.06&R catback
https://youtu.be/C7aKyhHtD3E

Class KR Dual catback
https://youtu.be/WnlgIFC_4Us

Class KR catback
https://youtu.be/JIiRKHDDnOI

MXP Performance
MXP Comp RS catback
https://www.instagram.com/p/CUkbDNJFTmg/

Perrin
3” catback for 1st gen (ZN6/ZC6), direct bolt on with no modifications required. Thanks @trippinbillies40 for the info
https://www.youtube.com/watch?v=n5KU55am9YI

STI Performance
STI muffler (axleback)
https://youtu.be/lH7VWy--0z0

Reserved for more entries

How about the STi axle back exhaust?

https://www.sti.jp/parts/subarubrz_zd/muffler/

Do we know whether existing FA20 aftermarket headers will fit/suit the FA24 as yet?

I haven't seen any news one way or another.

While it tells us nothing, the exhaust gaskets are the same.

Updated with @trippinbillies40 Perrin catback.

https://youtu.be/C7aKyhHtD3E

https://youtu.be/WnlgIFC_4Us

https://youtu.be/JIiRKHDDnOI

Added [emoji106]

HKS Legamax Premium
https://www.youtube.com/watch?v=yM3U1mfZhCU

The TOM's is my favorite so far :)

Is the Tom’s an actual product? I keep seeing concept in the material for that car.

https://www.royalbodykits.com/collec...em-toyota-gr86

A U.K. company I know nothing about.

Also says you need to purchase rear diffuser to install.

Question:

Sounds like the catbacks will fit on all years including the 2022 models. If i were to get lets say a midpipe from a 2016 and fit that to the front pipe, it would make sense that an axelback for the 2016 would then fit correctly?

Reason i ask, Nameless performance makes the best sounding exhaust imo. They do not have any 2022 exhausts yet however i know i can get an old gen midpipe pretty easily. So if that were to fit to the front pipe no problem, i should be able to then just buy the Nameless system and have no issues...is the hope.

Most likely yes, however a few members have noted that some exhausts interfere with some of the lower rear bumper aero underneath the car, right by the axleback flange.

Interfere as in massive bumping? Or it just wouldnt fit at all?

It was the xforce catback specifically. Sounds like it sticks out more to the side than the OEM flange location. With an OEM midpipe you’d likely be okay.

https://www.ft86club.com/forums/show...4&postcount=72

I have test fitted the FA20 header from FT86Motorsports.com, FTSpeed, HKS, Gruppe-s, and Tomei. On our shops 2022 BRZ with no fitment issues.

Hey all,

I wanted to cross post this here: https://www.ft86club.com/forums/show...&postcount=252

Been watching review of the prior gen catbacks installed on the 2022. Many videos have the same issue of exhaust tip / muffler alignment. See linked post for specifics.

Are there any subtle changes in the exhaust hanger locations on the 2022? I'll look for more examples if there is interest... or unless anyone has data points about alignment, mounting locations, etc. and wants to share. :)

Anyone know if this will fit the 22 BRZ
https://injen.com/i-30498585-injen-p...ses1230tt.html

type 60r
 

Id like for to hear a Tomei type 60r on a 2022. just for shits and gigs. no-one has done it yet that I can find.

I noticed that inlet pipe of old models is on the side, while it's in the middle in the 2022 model.
Do you know what changes in terms of performance and sound?