Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB

Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB (https://www.ft86club.com/forums/index.php)
-   BRZ First-Gen (2012+) — General Topics (https://www.ft86club.com/forums/forumdisplay.php?f=23)
-   -   BRZ owner loses control (Cars&Coffee Meet) (https://www.ft86club.com/forums/showthread.php?t=133198)

steel86gt 02-28-2019 07:20 PM

BRZ owner loses control (Cars&Coffee Meet)
 
Found this today, sadly one of the twins endured a crash when he fishtailed into a light pole making a left turn when he tried to showoff leaving a Cars & Coffee meet. The irony is that it happend right after a Mustang left the place without incident.
https://youtu.be/oGSW1fH-Pi0
:eyebulge:

8RZ 02-28-2019 07:23 PM

So what's his handle on here?

Sapphireho 02-28-2019 07:25 PM

Look for the part out thread.

Chikna 02-28-2019 09:24 PM

What happened to traction control?

HKz 02-28-2019 09:47 PM

Quote:

Originally Posted by Chikna (Post 3190855)
What happened to traction control?

for controlling 170 WHP? psh, only for newbs

Mr.ac 02-28-2019 11:05 PM

Lol what a dumbass. No ducks given.

Also....in before the thread gets close

ermax 02-28-2019 11:05 PM

By the sounds it seems like he lifted which put it side ways so he decided to throw power at it which wasn’t going to help at that point. Looks like it’s wet out. Hard to tell when viewing on my phone.

JR 02-28-2019 11:17 PM

There goes my insurance rates.

soundman98 02-28-2019 11:29 PM

it's always that 1-2 shift that gets them.

JR 03-01-2019 12:23 AM

This almost happened to me back when I had my FRS. It was my first rwd vehicle and I thought I was Chris Harris in it. One early morning, on my way to work, I decided it was a good idea to turn off all the nannies and gun it through a turn before the tires got up to temperature. Lets just say I turned around and went home to change my underwear. Luckily, I just missed the curb by a few inches.

tobin 03-01-2019 09:04 AM

"What mods do you guys recommend for 350 whp?"
"How do I permanently disable traction control?"
"What's the best cold air intake?"

Grady 03-01-2019 10:40 AM

Quote:

Originally Posted by tobin (Post 3190963)
"What mods do you guys recommend for 350 whp?"
"How do I permanently disable traction control?"
"What's the best cold air intake?"

Best mod for 350 WHP? Sell car and buy Oder 400hp Corvette.

At 350whp, 400+ engine HP Engine work should be done, Clutch, Trandmission is on the edge.

Forced induction is needed so cold air intake is not applicable.

Tcoat 03-01-2019 11:13 AM

Quote:

Originally Posted by Grady (Post 3190980)
Best mod for 350 WHP? Sell car and buy Oder 400hp Corvette.

At 350whp, 400+ engine HP Engine work should be done, Clutch, Trandmission is on the edge.

Forced induction is needed so cold air intake is not applicable.

`But everybody knows the car needs at least 300HP to even be drivable `


















































































































http://codyrapol.com/~EvenStevens/Sa...ont-Solved.png

MRCA1ST 03-01-2019 11:55 AM

hope his/her insurance see the video - otherwise the "a puppy came out of nowhere..." story will reign.

Tcoat 03-01-2019 12:04 PM

Quote:

Originally Posted by MRCA1ST (Post 3191025)
hope his/her insurance see the video - otherwise the "a puppy came out of nowhere..." story will reign.

the most popular version on here is "Somebody almost sideswiped me and I crashed avoiding them"

Sapphireho 03-01-2019 12:19 PM

1 Attachment(s)
Quote:

Originally Posted by Tcoat (Post 3190997)
But everybody knows the car needs at least 300HP to even be drivable

.

Gunman 03-01-2019 12:47 PM

Quote:

Originally Posted by Tcoat (Post 3190997)
[SIZE=4][SIZE=2] `But everybody knows the car needs at least 300HP to even be drivable `

It's clearly a fake video, was this on CNN? everyone knows an 86 doesn't have enough torque to break the rear end loose, even in the wet.

Chikna 03-01-2019 12:58 PM

Quote:

Originally Posted by Gunman (Post 3191060)
It's clearly a fake video, was this on CNN? everyone knows an 86 doesn't have enough torque to break the rear end loose, even in the wet.

No, it was posted on FoxNews Fake News.

mazeroni 03-01-2019 01:09 PM

https://media.giphy.com/media/vX9WcCiWwUF7G/giphy.gif

ZionsWrath 03-01-2019 02:26 PM

Quote:

Originally Posted by Gunman (Post 3191060)
It's clearly a fake video, was this on CNN? everyone knows an 86 doesn't have enough torque to break the rear end loose, even in the wet.

Quote:

Originally Posted by Chikna (Post 3191065)
No, it was posted on FoxNews Fake News.


Don Lemoon and Rucker Carlson cage match!!! GO!!

BigTuna 03-01-2019 02:36 PM

Quote:

Originally Posted by Grady (Post 3190980)
Best mod for 350 WHP? Sell car and buy Oder 400hp Corvette.

At 350whp, 400+ engine HP Engine work should be done, Clutch, Trandmission is on the edge.

Forced induction is needed so cold air intake is not applicable.

https://media.giphy.com/media/9eLbjOcGOpmY8/giphy.gif

Grady 03-01-2019 02:41 PM

Quote:

Originally Posted by BigTuna (Post 3191132)

Totally Did! Right after I posted it I realized it. Went back and tried to delete before anyone saw it. Didn’t work. Flame Away I deserve it!

Tcoat 03-01-2019 02:56 PM

https://media.giphy.com/media/3o7aTG...vbIQ/giphy.gif

Azzudien 03-01-2019 03:06 PM

Clearly the only explanation to this video is 2 friends decided to swap cars, and the BRZ owner was in the Mustang, and the Mustang owner was driving the BRZ.

Tcoat 03-01-2019 03:09 PM

Quote:

Originally Posted by Azzudien (Post 3191154)
Clearly the only explanation to this video is 2 friends decided to swap cars, and the BRZ owner was in the Mustang, and the Mustang owner was driving the BRZ.

https://media.giphy.com/media/l41lKX...6TGE/giphy.gif

Azzudien 03-01-2019 03:34 PM

Quote:

Originally Posted by Tcoat (Post 3191158)

Unfortunately after re-thinking my theory I disproved myself.

What BRZ owner would ever be friends with a Mustang owner?

Back to the drawing board

Tcoat 03-01-2019 03:38 PM

Quote:

Originally Posted by Azzudien (Post 3191178)
Unfortunately after re-thinking my theory I disproved myself.

What BRZ owner would ever be friends with a Mustang owner?

Back to the drawing board

I am. Two summers ago we both even traded cars for a an hour to try them out. Neither crashed.


Your theory may still be invalid though since there was a perfectly good crowd that they drove past before hitting the pole. No self respecting Mustang driver would pass up a crowd.

MuseChaser 03-01-2019 03:54 PM

Quote:

Originally Posted by Tcoat (Post 3191181)
...
Your theory may still be invalid though since there was a perfectly good crowd that they drove past before hitting the pole. No self respecting Mustang driver would pass up a crowd.


... regardless of whether or not he was driving a Mustang OR a twin..

FR-Sky 03-01-2019 04:08 PM

That's some serious skill.

Seiryuu 03-01-2019 05:14 PM

I like how the Z3 behind just drove by without a care.

Sapphireho 03-01-2019 05:16 PM

Quote:

Originally Posted by Seiryuu (Post 3191229)
I like how the Z3 behind just drove by without a care.

Well, at 9000 lbs it grips well

Rampage 03-01-2019 06:32 PM

Quote:

Originally Posted by Seiryuu (Post 3191229)
I like how the Z3 behind just drove by without a care.

He probably just thought "Stupid Kid!"

wbradley 03-01-2019 09:57 PM

He is one guy who does not do the pedal dance well!

I think this guy miraculously slammed the curb, damaging his wheels and possibly some suspension components but not jumping the curb and hitting the pole. There might be little to no body damage.

WTB: 2 OEM 86/BRZ wheels plus LCA and assorted other suspension parts for driver side only.

Tcoat 03-01-2019 10:04 PM

Quote:

Originally Posted by wbradley (Post 3191323)
He is one guy who does not do the pedal dance well!

I think this guy miraculously slammed the curb, damaging his wheels and possibly some suspension components but not jumping the curb and hitting the pole. There might be little to no body damage.

WTB: 2 OEM 86/BRZ wheels plus LCA and assorted other suspension parts for driver side only.

Watch it again. He hits the pole hard enough it breaks the light off at the top. Almost enough to knock it over.

We have no idea how old the video is though it may have been some guy looking for parts on here years ago.

Packofcrows 03-02-2019 12:18 AM

vtec kicked in yo.

jbsali 03-02-2019 12:33 AM

never seen a mustang leave a cars & coffee without hitting anyone.. so i guess anythings possible! RIP Lamp post

soundman98 03-02-2019 02:01 AM

https://cdn.shopify.com/s/files/1/01...g?v=1531163473

Rampage 03-02-2019 01:25 PM

Quote:

Originally Posted by Tcoat (Post 3191326)
We have no idea how old the video is though it may have been some guy looking for parts on here years ago.

Nah, it is fresh. It just happened about a week ago. I found the Facebook page of the lady that got the video. They are broiling the BRZ owner and FR-S/BRZ owners in general pretty good over there. I guess the Mustang drivers are getting a little break from the razzing they normally take.

Irace86.2.0 03-07-2019 12:51 PM

Clearly tried to drift the car on wet roads. The tail went out mid turn and he tried to control the slide, so VSC/trac was probably off.

Dadhawk 03-07-2019 01:38 PM

To be fair to the Mustang driver, we don't know that he didn't take anyone out. By the time the 86 turns the corner that entire side of the street is clear, and the Mustang is out of sight. It could very well be on the other side of the shrubbery or well down the street with several people wrapped around the hood.


All times are GMT -4. The time now is 05:50 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
User Alert System provided by Advanced User Tagging v3.3.0 (Lite) - vBulletin Mods & Addons Copyright © 2026 DragonByte Technologies Ltd.


Garage vBulletin Plugins by Drive Thru Online, Inc.