Wheel Directory: Enkei GTC01 17x7.5 +48
 

http://www.darrendriven.com/ft86/title.png

As posted in another topic by @quik1987 ...

http://cdn.mkimg.carview.co.jp/minka...t=2c78f0ad7382
http://cdn.mkimg.carview.co.jp/minka...t=fd4a9bbff8dd
ENKEI Racing GTC01

100-5H 17-7.5jで実測7.8kgと、メーカー公称値より軽かったです（？）
因みに純正は実測9.4kgでした。

51,000 円

Whats with the dual valve stems on these wheels?

Because race car.

Sexy. Me like.

Enlighten me. I have never seen a wheel with two valve stems. What is technical necessity behind two of them?

As far as I can tell, it would just add more weight and the potential of an extra point of failure.

http://www.modified.com/editors/sccp...03_m_rims.html

Ask and you shall receive.

only if it was concave

are you sure these are GTC01's? - the joins around the central hub are more curved and v shaped.... close though... would love to know the wheel specs and offset it they are - I can't actually tell....

http://image.nengun.com/catalogue/or...nkei-gtc01.png

Upon further investigation they seem to be
Rays Gram Lights 57 Ultimate
http://t3hclap.com/wp-content/upload...7Ultimate2.jpg

Enkei GTC01 18x7.5 +48
 

Hey Guys,

I recently got these fitted on Thursday just passed. The car is on stock suspension and I'm now looking to keep it that way. Let me know what you think :party0030:

I apologise about the picture quality as I'm using an iPhone 5.

http://img4.imageshack.us/img4/5998/s86wgtc01.jpg

:thumbup:

Looks nice. Let's see it on the ground now. :popcorn:

Looks great

Nice mate, I'm doing the same thing with 18x8. On stock suspension too. Will post pics when I get them, just going through customs

Yeah I'm leaning towards keeping stock suspension now too. Awesome man! 18x8 is the largest you can get in a 5x100 stud pattern too

More pics please!

Attachment 25217Attachment 25218Attachment 25219

Ok I took some more pics, I'm not the best photographer in the world but it should give you an indication of how it sits in the wheel wells and its current stance

Looks clean man. I thought I was the only lame one that appreciate the stock suspension lol

Lol well it's a bit of that as well as me lacking funds to do something suspension wise. To be honest at the moment, this is my daily driver, so to have coilovers on it or a different set of springs and shocks, it wouldn't be really what I use it for, unless I could get it done where its still a relatively comfortable ride.

Merged another topic with same wheel and same specs.

Standby for photos of the Enkei GTC01 @ 17 X 7.5 and +48 offset with stock suspension and stock tires. Enkei specs the weight at 17.8 pounds. OEM offset is +48.
Installation will be in about one week. (on a Sterling Silver Metallic Premium).

Enkei & Discount Tire did some great timing for me. Got the wheels earlier than expected. They are installed. Enkei supplies an additional spare stem and an allen wrench with each wheel. The allen wrench is for use with the center cap. See close-up photo. The ring used to properly center fit the hub is aluminum, not plastic. Note also: No extra holes for hub studs and all lug nuts require special key.


Attachment 31265

Attachment 31266

Attachment 31267

One more photo:

Looks good!

Although they are heavy, but man do they look good!

Anyone know if the 17x7.5 +48 will clear brembo calipers?