Closed deck block, heads, head studs, rods, pistons, Edelbrock SC plus much more!
 

I'm preparing to do a V8 swap on my BRZ so all of these FA20 associated parts gotta go! All parts are very low miles. Most less than 1000 miles.

Here's what's left. All very high quality parts.

Edelbrock complete supercharger kit with less than 1000 miles on it!
$3600 shipped

SOUTH BEND CLUTCH STAGE 3 DAILY (400 FT/LBS) less than 1000 miles
$600 plus shipping

2016 Manual transmission with 17K miles
make me an offer prefer pick up

Ecutek tuning cable
$240 shipped

Closed deck block
ARP head studs
Carrillo CP pistons and rods 12.5:1
Stock heads



I will be pulling apart the FA20 in the weeks to come so all parts will be available!

Firm on your prices? Was looking at clutch and Perrin engine mounts

Yeah, I'm pretty firm on prices as everything is practically new. But feel free to PM me an offer. If things don't sell over time then I'll be more willing to negotiate.

Where in California are you located?

San Luis Obispo

Too bad for me you're not local to LA

Shipping within CA is pretty reasonable.

Do you have the whole oil cooler setup, or just the heat exchanger itself?

What version is the IRP shifter?

Yes, I have the lines, sandwich plate, the whole set up.

It is the V3 literally installed for only 48 hours. Loved the feel of it, requires some effort when shifting but it feels almost like a gated shifter when installed. No longer missed the shifter feel in my S2000 after installing this shifter. There will be some rattle at high rpm's though. I will include some sound deadening foam I purchased which was able to muffle 90% of the rattle free of charge to whoever buys. If you already have a loud exhaust or or drive with your windows down then the rattle shouldn't bother you too much.

Which version of the Flex Fuel Kit do you have?

MK1 which is the latest version as far as I know.

Are you selling the engine?

Not as a whole but it will be parted out. The closed deck shortblock will be for sale as well as everything else that's still in good condition forged pistons etc.

Sent you a PM about the oil cooler. Very interested.

Flex Fuel still available?

Sent from my G8142 using Tapatalk

Yes, as of right now but it I'm sure it will be gone soon!

Bump cause everyone could use some boost in their life!

Bump lots of high quality parts still available

Bump

Parts going fast! Still some good stuff left though

Edelbrock kit still available! Someone add boost so you have something extra to be thankful for come thanksgiving!

Prices reduced

are those mounts still available and how much?

What’s lowest you’ll go for sc?

How much for the steering wheel?

Only parts left are what's listed.

Only parts left are what's listed.

bump

New photo added showing complete Edelbrock kit. Only thing I'm missing is the directions which you should easily be able to get from Edelbrock for free.

bump

Prices lowered bump

make me an offer

PMed you

Also PM'ed. :thumbsup:

Didn't get a PM from you. If anyone is serious and doesn't want to low ball me on a practically brand new kit please message me. I will include the Ecutek cable for the price listed. Thanks

I re-sent the message.

bump

bump