Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB

- Member's Car Journals (https://www.ft86club.com/forums/forumdisplay.php?f=40)

- - Trxn’s 860 Build (https://www.ft86club.com/forums/showthread.php?t=128608)

Trxn’s 860 Build

Welcome! I present my 2017 Toyota 86 860 Special Edition build. Purchased on July 9, 2017. My manual swapped daily driver. Feel free to follow my 86 @li.motive on IG.

Current Setup:

https://uploads.tapatalk-cdn.com/202...a31d682ba9.jpg

https://uploads.tapatalk-cdn.com/202...e9a74efa68.jpg

https://uploads.tapatalk-cdn.com/202...d03d71746f.jpg

https://uploads.tapatalk-cdn.com/201...85b900bc25.jpg

Trxn’s 860 Build

Exterior:
Lamin-X Door Handle Cup Paint Protection
Lamin-X Door Door Edge Guards
PastiDipped Emblems
PlateGuard Tabless License Plate Frame
EzAuto Wrap Glossy Golden Yellow Tint Film
H&R Trak+ Spacer 20mm & 25mm
Helix Clear Sidemarker
Sylvania LED 194 Cool White (Side Markers)
WEIMELTOY 194 Led Car Bulb (License Plate/Trunk)
OLM TR Style Front Bumper Skirt Cover
GCS Smoked 4th Brake Light
Zenki Taillights (Cleared Modded)
Diode Dynamics Tail as Turn

Wheels/Tires:
Volks Racing ZE40 18x9.5 +43 5x100 Gold
Firestone Firehawk Indy 500 255/25R18
Michelin CrossClimate 2 215/45R17
Project Kics R26 Lug Nuts
Project Kics 65/56 Hub Centric Ring

Interior:
WeatherTech FloorLiner Front and Rear
Pilot Automotive 194 LED (Dome Light)
Solar Gard Ultra Performance 60 Tint (Rear)
Diode Dynamics SmartTap Flasher Relay
Lexen Precut Ceramic Tint 15% (Sides)
ROBOQI Magnetic Car Phone Mount (Magsafe)
Motoshield Pro Nano Ceramic Tint 70% (Windshield)

Suspension:
Tein Flex Z Coilovers
ISC Suspension Rear Lower Control Arm V3
Cusco Strut Bar w/ Master Cylinder Brace

Engine/Transmission:
Mishimoto Silicon Induction Hose
OpenFlash Header v1
HKS Dual Resonated Front Pipe
Perrin Overpipe
HKS Super Hybrid Air Filter
Torque Solution Cam Plate
Torque Solution Shifter Carrier Bushing
Torque Solution Rear Shifter Bushing
MTech Shifter Springs
MTech Clutch Spring
Motul Gear 300 Transmission Fluid
Raceseng Sphereology Shift Knob
Perrin 2.5" Resonated Catback

Tune:
OpenFlash Tablet Stage 2 E85

Others:
ATE Type 200 Brake Fluid

To be installed:
Perrin 19mm Front Sway Bar
Whiteline Rear Lower Control Arms
Whiteline Adjustable Toe Arms
JDM Exhaust Hangers 44066AJ010 x7
PLM UEL Header

Retired:
RaceComp Engineering Yellow Springs
Killer B Motorsport Round Shift Knob Black (Delrin)
Pilot Automotive 3175 LED (License Plate Light)
WizGear Magnetic: Car Mount with Twist Lock
Precut Sun Strip 20%

Delivery Day 7.9.2017

First Detail 7.15-17.2017

Photos 7.17.2017

LED Dome Light 7.17.2017

Phone Mount and Plasti Dip 7.19.2017

LED License Plate Light 7.20.2017

Installed LED license plate bulbs.

These bulbs are not the brightest, maybe even on the dimmer side. They are dimmer than the LEDs that Phillips makes. But, I like it.

https://uploads.tapatalk-cdn.com/201...ab31ba9b3c.jpg https://uploads.tapatalk-cdn.com/201...ffbcf32c5b.jpg https://uploads.tapatalk-cdn.com/201...927e5ba098.jpg

Diode Dynamics SmartTap 8.1.2017

Installed DD's SmartTap Flasher Reply that replaces the factory one.

I got it mainly for the one tap feature for lane changes. The other features are bonuses. Getting the factory reply out was a real struggle but I managed with a flat head from the back. The departure lights works but the arrival lights do not. At the time of installation, I e-mailed them and Diode Dynamics knows that arrival light feature does not work on 2017 cars. Kinda bummed. It would be so cool if it worked. Not sure if they came out with a fix...

https://uploads.tapatalk-cdn.com/201...3f4d87c932.jpg
https://uploads.tapatalk-cdn.com/201...c994472e98.jpg

Window Tint August???

Sometime in August and before the road trip to Canada I got my windows tinted at Winner's Window Tint in Rockville.

I should have gone with a darker tint. There was just a big jump from legal to illegal percentage.

Road Trip to Canada 8.20.2017

Went on a road trip to Quebec to meet family.

The car drove great. The only discomfort I felt was with my shoulders. Due to the bolsters, my shoulders got sore from not being able to lay flat. But, this only happened after like 6 hours of straight driving. Really not that bad. Caught a whole bunch of bugs on my front bumper and sap juice on the car from parking under a sap soaked tree in Canada. I don't have much phone pictures because my canoe of two other friends capsized at Black Hill and my HTC got toasted a week before.

https://uploads.tapatalk-cdn.com/201...a68682384f.jpg https://uploads.tapatalk-cdn.com/201...39325ddb56.jpg https://uploads.tapatalk-cdn.com/201...dafa028ec9.jpg

Lowering Springs! 8.22.2017

Installed RaceComp's Yellow Springs for the 86.

I didn't measure how much exactly it dropped but in the end it looks so so so much better. I fell in love with the car all over again. Regarding ride quality, I can't tell you the difference...I kinda feel rides a tiny tiny bit stiffer? Or is it just my imagination? After the springs are put on, you can visually see the increased camber in rear. Not that big of a deal to me though. May need LCA later down the road. Really want wheels though. Honestly, this is the best thing that happened to the 86 this far.

Before:

https://uploads.tapatalk-cdn.com/201...5aedb673d1.jpg

After:

https://uploads.tapatalk-cdn.com/201...cd61f5ed08.jpg
https://uploads.tapatalk-cdn.com/201...314cfab412.jpg

Photos 10.8.2017

Photos 11.12.2017

Photo 12.30.2017

Did a little bit slow-mo snow drifting too. :thumbup:

https://uploads.tapatalk-cdn.com/201...e81d0297c5.jpg

Detail 06.18.2018

Induction Hose 7.1.2018

Installed Mishimoto Induction Hose.

Only struggle was with removing the PVC tube. Also, factory clamp for the PVC tube is just too small somehow so I switched it out with a different one.

https://uploads.tapatalk-cdn.com/201...408d3bc18d.jpg

Before:

https://uploads.tapatalk-cdn.com/201...38a9ad66c5.jpg

After:

https://uploads.tapatalk-cdn.com/201...9788bbcb4b.jpg https://uploads.tapatalk-cdn.com/201...0c96d0aa3b.jpg

Fog Light Tint 7.4.2018

OpenFlash Tablet 7.14.2018

Got my OpenFlash Tablet today. Can't wait to try out Stage 1 and then 2 soon.

https://uploads.tapatalk-cdn.com/201...39ff94ce8c.jpg

OpenFlash Header v1 8.11.2018

Installed the OpenFlash headers v1. There is quite a sound difference than what I've read. Right around 2k the rumble is super audible and I really like it. I think it's a little more powerful overall. I'm more excited about the louder sound it gave the 86 than the power gains. Also, the stock header is surprisingly heavy.

https://uploads.tapatalk-cdn.com/201...67a02f2caa.jpg
https://uploads.tapatalk-cdn.com/201...66ce7cc2bf.jpg
https://uploads.tapatalk-cdn.com/201...1546510dab.jpg

H&R Trak+ Wheels Spacers 8.17.2018

Installed 20mm and 25mm pairs of wheels spacers from H&R. I brought them used but they were pretty beat.

Gives the 86 a very flush fitment. Not used to the look at first but we'll see.

https://uploads.tapatalk-cdn.com/202...50477f7197.jpg

https://uploads.tapatalk-cdn.com/202...6be50b2e6b.jpg

https://uploads.tapatalk-cdn.com/201...ab410ca399.jpg

https://uploads.tapatalk-cdn.com/202...bd59170695.jpg

https://uploads.tapatalk-cdn.com/201...5692cc8bbb.jpg

I think some spoiler risers will look awesome. Love the 860 bro.

Helix Clear Side Marker 8.24.2018

Installed Helix's clear side markers from another member of the forum. It is also paired with Sylvania 194 cool white LEDs. Condition of them weren't the greatest but its not that visible. The non-orange color of the side markers really gave the 86 a better look.

https://uploads.tapatalk-cdn.com/202...432fdfaf91.jpg

https://uploads.tapatalk-cdn.com/202...18b89406ff.jpg

https://uploads.tapatalk-cdn.com/202...8522b2ce6a.jpg

https://uploads.tapatalk-cdn.com/202...3d5c029f0c.jpg
https://uploads.tapatalk-cdn.com/202...053a82658d.jpg

Shoutout to @xlost_king for this dope roller:

https://uploads.tapatalk-cdn.com/201...2354eceb5f.jpg

20% Sun Strip 9.29.2018

Installed sun stripe tint. UltimaCool DUO 20% tint.
Brought it precut for 13-16 Scion FRS thinking it would be the same but actually the mirror cut out is different so I had to make my own cuts.
https://uploads.tapatalk-cdn.com/201...637e7c0fa3.jpg
https://uploads.tapatalk-cdn.com/201...10ce588ed7.jpg
https://uploads.tapatalk-cdn.com/202...c00378d249.jpg

Sound Clips OFH v1 8.12.2018 + 10.21.2018

Here are some sound clips after the install of the Open Flash Header v1 and pop tune. Everything header back is stock.

Revs
Acceleration

Halloween Photoshoot 10.27.2018

Photos 2.24.2019

Photos 3.18.2019

Photo @ Bethany Beach, DE 3.19.2019

Photos @ Surf City, NC 5.30.2019

[IMG]https://uploads.tapatalk-cdn.com/20200517/883b338866fa6aff9e63d9***3a626a3.jpg[/IMG]
https://uploads.tapatalk-cdn.com/202...bddbd6daac.jpg

OLM TR Style Front Bumper Skirt Cover 8.22.2019

Installed the OLM TR Style Lip on the 86. Fitment was very tight so I had to really stretch the bumper over the bumper. I didn't peel off any of the backings for the adhesive stripes that came on the lip. There is a little gap on the right side of the lower portion highlighted in one of the pics below. It could probably be eliminated had I used the adhesive. Other than that, I cut the weather stripping a little too long which I will fix later.

https://uploads.tapatalk-cdn.com/202...f31feb1a39.jpg
https://uploads.tapatalk-cdn.com/202...1acb2c42db.jpg
https://uploads.tapatalk-cdn.com/202...c5f0a1f0fe.jpg
https://uploads.tapatalk-cdn.com/202...b34c73d45d.jpg
https://uploads.tapatalk-cdn.com/202...6f4c873684.jpg

Photo 10.18.2019

Photo 10.25.2019

Photos 10.26.2019

Photo 11.27.2019