Leather wrapped interior pieces (including dash trim) pics
 

Just got these back today:

http://i26.photobucket.com/albums/c1...7/dashtrim.jpg


The trim piece was bonded to create a single piece. It was also sanded down so that when wrapped it retains the original dimensions.

http://i26.photobucket.com/albums/c1...17/speaker.jpg


Speaker grill had to be cut out and then bonded / siliconed back in place.



http://i26.photobucket.com/albums/c115/Dean017/CC.jpg



The cluster surround was also covered, but I don't have a pic.

Total ran me around $1k at Mark Luhr's custom upholstery in Santee, California for the labor and a full hide.

I like haha

Any installed pictures yet?

How much did it cost?

says 1k

Working on it :)

Could save a bit with a cheaper material. He's also a bit more expensive than some other places, but his work is quite good.

Installed pics

Looks a lot better in person

http://i26.photobucket.com/albums/c115/Dean017/wide.jpg



http://i26.photobucket.com/albums/c1...rinstalled.jpg

Love it. It adds so much more of a finished and higher quality look to the interior.

Nice. Now you just need an e-brake boot.

Wow, that's nice!

Pricey, too. How's the price of Alcantara compared to leather?

Looks great. Not sure on cost, but you get what you paid for with this sort of work. Kudos!

I like it! Expensive though...

Not really sure about the dash, maybe I need to see better pics. Really digging the speaker trim though.

Alcantara is typically a touch more expensive...

It is pricey but understandably so. I had 7 pieces covered, they had to figure out how to do a lot of the stuff, there was cutting and bonding involved, and they ordered a full cow hide.

Very nice!!! The red stitching looks like it matches well.

I don't think the price is that bad..looks great

Love how the center console piece came out. Nice man!

Oh damn, I really like how it turned out ..
Might have to copy ..

This looks fantastic... money well spent.

Looks fantastic. A g not is expensive, but I am sure the super long and crappy labor with material cost is fair for sure.

I've dabbled with upholstery in the past, and it's definitely something I'd just rather spend the money on these days. It's not worth the headache and risk of fucking up to do it myself.

Oh wow that looks great!

I though of having all the sliver trim found in the car painted gloss black. Such as the silver piece on the steering wheel, the vents, the center console pieces by the climate controls, and the silver piece around the shiftier.

It would look good and be much cheaper. However your way is much more baller.

You spend a grand on interior and then show it off using the 5 dollar Snoopy camera you bought back in '73?

j/k...looks good from what I can tell. :)

Looks really nice. :thumbsup:

It's actually a Sony DSC-TX7...I just can't take pictures for shit :P
I think the ISO was too high and my hands shake like I have MS. I'll have my better half take a few...she's much better at it.

edit: Probably the best I'm able to do.



http://i26.photobucket.com/albums/c1...7/CIMG0718.jpg

http://i26.photobucket.com/albums/c1...7/CIMG0731.jpg


http://i26.photobucket.com/albums/c1...7/CIMG0702.jpg

Sweet!!!

+1

That looks absolutely fantastic! Well worth the money, especially considering it would probably cost at least half that much just to get the speaker panels and knee pads from Japan. I will definitely be doing the same, with the exception of the dash section. Haven't figured out what I want to do with that yet.

Nice work! Definitely raises the caliber of the interior!

Looks great. I ordered leather heated seats. I might have to copy to match the leather seats. looks awesome money well spent.

Anyone in the Cleveland area that could do work like this. I ve been in Florida for the last 11 years just moved back so as far as where to take my vehicles for modding and interior work like this I need some direction on reputable shops.

Again looks very high end great job

Where did you get the leather heated seats? I dig this idea for the dash. It would be nice if someone would let us send them our parts and have them covered and returned.

I really like the look of this.. now if someone would make a flat bottomed steering wheel.. and add some Aluminum bits for the console pieces and the steering wheel.. PERFECT! :)

It looks great!
How did you install? Using double side tape?
Thanks.

^ this made me LOL