Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB

Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB (https://www.ft86club.com/forums/index.php)
-   Engine, Exhaust, Transmission (https://www.ft86club.com/forums/forumdisplay.php?f=8)
-   -   NA Tuning. HKS Full Exhaust (https://www.ft86club.com/forums/showthread.php?t=124349)

Raven86Project 12-28-2017 02:40 PM
NA Tuning. HKS Full Exhaust
 
https://i.imgur.com/YIHeaFs.jpg

HKS Legamax Premium
https://i.imgur.com/4mizOPC.jpg

HKS Dual Resonated Front Pipe
https://i.imgur.com/YEY5kN5.jpg

Tanabe Over Pipe
https://i.imgur.com/w1ZKOOV.jpg

HKS Super Manifold "Boxer Spec"
https://i.imgur.com/mU2fMpP.jpg

Perrin Inlet Hose
https://i.imgur.com/LUjy1AK.jpg

Blitz Air Filter
https://i.imgur.com/W6HYc0d.jpg

https://i.imgur.com/xdzc6BF.jpg

Getting it tuned next week. Will post final results with a video :D

Teseo 12-28-2017 02:43 PM
Brand of the header?

Raven86Project 12-28-2017 02:47 PM
I just edited the post with names

weederr33 12-28-2017 06:08 PM
Beautiful! I'm excited to hear it.

FunnyGopher 12-28-2017 08:47 PM
Man. I remember looking at this package when I was shopping for exhausts. I ultimately decided not to go UEL, but this was the best sounding UEL setup IMO. And it's catted! :D

Summerwolf 12-28-2017 09:13 PM
Quote:
Originally Posted by FunnyGopher (Post 3021436)
Man. I remember looking at this package when I was shopping for exhausts. I ultimately decided not to go UEL, but this was the best sounding UEL setup IMO. And it's catted! :D
Catted?

Raven86Project 12-28-2017 10:03 PM
Quote:
Originally Posted by weederr33 (Post 3021390)
Beautiful! I'm excited to hear it.
Thank you for the positive feedback!:thumbup:

FunnyGopher 12-28-2017 10:29 PM
Quote:
Originally Posted by Summerwolf (Post 3021450)
Catted?
It is indeed.
Link to the HKS page on the header: https://www.hks-power.co.jp/en/produ...haust/db/17479

Summerwolf 12-29-2017 12:04 AM
That is one tiny "catalyzer."

Raven86Project 01-04-2018 03:31 PM
https://i.imgur.com/Hl27DBw.jpg

https://i.imgur.com/6IYW6g0.jpg

https://i.imgur.com/t14p2ee.jpg
:D

Here's the video:

https://i.imgur.com/8AgcLhv.jpg

Gamace 05-27-2020 12:21 AM
Do you have sound clips of this setup? I ordered my parts and they are on their way. However, I went with the Deep package.

Sent from my SM-N975U1 using Tapatalk

Raven86Project 05-28-2020 07:46 PM
Quote:
Originally Posted by Gamace (Post 3335286)
Do you have sound clips of this setup? I ordered my parts and they are on their way. However, I went with the Deep package.

Sent from my SM-N975U1 using Tapatalk
Here's another old clip from my instagram before I went turbo:

https://www.instagram.com/p/BfLTAkdHs9K/

Gamace 05-30-2020 06:38 PM
Quote:
Originally Posted by Raven86Project (Post 3335943)
Here's another old clip from my instagram before I went turbo:

https://www.instagram.com/p/BfLTAkdHs9K/
Thank you and I just received my headers but the instructions are in Japanese. I'm trying to use Google Translate to translate them to English.

Did you already translate the instructions for the install? Also roughly how long did it take for you to install it?

Sent from my SM-N975U1 using Tapatalk

x1UP 05-30-2020 07:17 PM
Quote:
Originally Posted by Gamace (Post 3336655)
Thank you and I just received my headers but the instructions are in Japanese. I'm trying to use Google Translate to translate them to English.

Did you already translate the instructions for the install? Also roughly how long did it take for you to install it?

Sent from my SM-N975U1 using Tapatalk
The instructions to install these are pretty much the same as any other UEL or EL header install. All you have to do is find a YouTube video of a UEL header install on a BRZ and 86 and you should be good.

The install is fairly easy, you just need to uninstall the old header and then install the new one - pretty much just a bolt on!

Gamace 05-30-2020 07:19 PM
Quote:
Originally Posted by x1UP (Post 3336673)
The instructions to install these are pretty much the same as any other UEL or EL header install. All you have to do is find a YouTube video of a UEL header install on a BRZ and 86 and you should be good.



The install is fairly easy, you just need to uninstall the old header and then install the new one - pretty much just a bolt on!
Well I have been watching videos as well. The Instructions kinda look crazy lol so I wasn't sure if because HKS stuff just look complicated more than other installs lol.

Sent from my SM-N975U1 using Tapatalk

x1UP 05-30-2020 07:20 PM
Haha nope! It all should be the same! I can't speak for the the HKS install, but from videos i've seen, should be the same.

Excited to see your setup once all installed!

Gamace 05-30-2020 07:22 PM
Quote:
Originally Posted by x1UP (Post 3336675)
Haha nope! It all should be the same! I can't speak for the the HKS install, but from videos i've seen, should be the same.

Excited to see your setup once all installed!
I will post some pics if I can take them. I installed my HKS Hi-Power Spec L Catback Exhaust a week ago. Then I just got the headers and currently waiting on the HKS Flash Editor so that I can tune it and complete the HKS Deep Package for that Boxer rumble!

Sent from my SM-N975U1 using Tapatalk

x1UP 05-30-2020 07:46 PM
Quote:
Originally Posted by Gamace (Post 3336676)
I will post some pics if I can take them. I installed my HKS Hi-Power Spec L Catback Exhaust a week ago. Then I just got the headers and currently waiting on the HKS Flash Editor so that I can tune it and complete the HKS Deep Package for that Boxer rumble!

Sent from my SM-N975U1 using Tapatalk
Nice! You got the HKS Deep package. Curious to hear how that sounds. I know there's been videos, but always like to see an updated one.

I'm actually planning on getting the Boxer Spec header as well (have to wait about 4 weeks though), so that's exciting!

Gamace 05-30-2020 08:07 PM
Quote:
Originally Posted by x1UP (Post 3336678)
Nice! You got the HKS Deep package. Curious to hear how that sounds. I know there's been videos, but always like to see an updated one.



I'm actually planning on getting the Boxer Spec header as well (have to wait about 4 weeks though), so that's exciting!
I will try to make a video and post it then! I am excited.

Sent from my SM-N975U1 using Tapatalk

Raven86Project 05-30-2020 11:33 PM
Quote:
Originally Posted by x1UP (Post 3336673)
The instructions to install these are pretty much the same as any other UEL or EL header install. All you have to do is find a YouTube video of a UEL header install on a BRZ and 86 and you should be good.

The install is fairly easy, you just need to uninstall the old header and then install the new one - pretty much just a bolt on!

Pretty much this

Gamace 06-02-2020 12:13 PM
Quote:
Originally Posted by Raven86Project (Post 3023845)
Is that the thermal shield in the centre of the picture? I'm sorry for asking all these questions. Its my first time learning all these car stuff. Just want to make sure I don't screw up any installation.

Sent from my SM-N975U1 using Tapatalk

Raven86Project 06-03-2020 02:33 AM
Quote:
Originally Posted by Gamace (Post 3337645)
Is that the thermal shield in the centre of the picture? I'm sorry for asking all these questions. Its my first time learning all these car stuff. Just want to make sure I don't screw up any installation.

Sent from my SM-N975U1 using Tapatalk

That's correct :thumbsup:


All times are GMT -4. The time now is 03:06 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
User Alert System provided by Advanced User Tagging v3.3.0 (Lite) - vBulletin Mods & Addons Copyright © 2026 DragonByte Technologies Ltd.


Garage vBulletin Plugins by Drive Thru Online, Inc.