Interior Project
 

JDM red handles + black RC parts
https://i.imgur.com/EbAh5TH.jpg

http://i.imgur.com/Avp2yGl.jpg

https://i.imgur.com/eUqANgc.jpg

2017 86 Panel cover
http://i.imgur.com/kQjXVxU.jpg

http://i.imgur.com/b1iFB4Q.jpg

Black Alcantara, black stitching shift boot to match panel cover
http://i.imgur.com/1V3TrQG.jpg

BRZ ts Cluster Hood
http://i.imgur.com/t6O9EsS.jpg

http://i.imgur.com/fLG57lA.jpg

GotDamd!
http://i.imgur.com/f41HF2k.jpg

http://i.imgur.com/J9OBqnS.jpg

http://i.imgur.com/pfG1zCE.jpg

Airbag logo little project. Still not finished; got a couple of rough edges
http://i.imgur.com/YcxoSTj.jpg

Everything installed:
http://i.imgur.com/i1dzVBO.jpg

http://i.imgur.com/JkViaXx.jpg

http://i.imgur.com/VkBcY15.jpg

http://i.imgur.com/FEFC8Qs.jpg

http://i.imgur.com/RpxLQ6k.jpg

http://i.imgur.com/SoHEfOG.jpg

http://i.imgur.com/fs7lYTe.jpg

http://i.imgur.com/KbFGuMj.jpg

http://i.imgur.com/inUH52j.jpg

http://i.imgur.com/yUyrbtg.jpg

Before/After
http://i.imgur.com/juBGhqX.jpg

http://i.imgur.com/fC9yfWf.jpg

Looks amazing man!

Great update

Nice job!
What about the silver vents? Paint or wrap them maybe?
What is the center switch for? Where and how did you get/make it?

Thank you! In a future update they'll be gone, but for now they are still matching the rev tach.
The center switch will be to lift/lower the front suspension to go over speed bumps. I'll be using coilovers + air cup system. I'm reusing the snow/sport switch from the automatic 86.

Interior mods are the best mods.

@JDM_inspired where did you get the shift boot?

Sent from my SM-G935V using Tapatalk

Looks great. You probably have as much money in interior parts as you paid for the car.

22R

That's awesome


Sent from my iPhone using Tapatalk

how much did the black trim pieces and the red door handles cost? love how the black and red combo looks!

The red handles cost around $60 (only place I've seen them is ebay) and all the black trim pieces between $150 and $200.
Here's a list with all the part numbers:
http://www.ft86club.com/forums/showt...43#post1890543

More interior changes coming soon...

for the red door handles did you have to take off the door panel to install them or can you do it without taking it off?

you have to take it off

i would have just done a DIY for a fraction of the price aha but looks good man

Yeah if it's going to come off might as well just paint it your self and clear coat it as well


Sent from my iPhone using Tapatalk

Painted the sides of the OEM seats in red to match the rest of my interior.
http://i.imgur.com/rZnLP6Z.jpg

http://i.imgur.com/NHkl1sc.jpg

http://i.imgur.com/uqjxKkO.jpg

CyberStork gauge needle caps (to be customized)
http://i.imgur.com/bYFjNYf.jpg

http://i.imgur.com/1ymTT8F.jpg

A/C control knobs
http://i.imgur.com/DkqE2VC.jpg

http://i.imgur.com/bFNVkq3.jpg

http://i.imgur.com/48HmXqt.jpg

http://i.imgur.com/YqUFFYv.jpg

http://i.imgur.com/AToZuAn.jpg

http://i.imgur.com/FNS8O2S.jpg

Today I painted the borders of my OEM floor mats:

http://i.imgur.com/w850shp.jpg

http://i.imgur.com/KHB1A5O.jpg

http://i.imgur.com/9WPp25G.jpg

http://i.imgur.com/YGZLyI6.jpg

Where'd you buy all of these parts?

Most interested in the knob.

Second question, how does the shift knob feel compared to the regular stock one? Is the texture any different / grippier?

It feels nicer than the stock one because it gets rid of the stitching and glossy cap that felt a bit uncomfortable. Also grip is better.

Real nice work. I love upgraded interiors. How is the quality of the AC knobs are they a solid metal or plastic ?
Here is a pic of mine most recently
http://i.imgur.com/89B3XyP.jpg

It's cool to see other people using spray dye. I used black dye on all the red stitch. :thumbup:

Your interior looks nice. I like the knob bezels.

Thanks


so how are the knobs mounted, is there double side tape on the backside? If so maybe removing the thickness of the tape and using a glue would get it to sit closer.

Here's one of my favorite updates: Custom Design Gauge Faces.
They looks simple, but a lot of thought went into them. I tried to keep the design as minimalist as possible with highlights only on the rev tach.
It's like a Remix version of the FR-S stock one :D.
Also custom painted the Stork needle caps with a dark tint over the metal and center ring to match.

http://i.imgur.com/oBJq8Xb.jpg

http://i.imgur.com/J9prfws.jpg

http://i.imgur.com/LwQQuIU.jpg

Funny thing is that I used a combination of translucent paint and clear that created a rainbow effect on the surface depending on the angle that light hits it, which wasn't intended to be, but came out really nice.
http://i.imgur.com/mbDZ8Se.jpg

http://i.imgur.com/ZZNsDEZ.jpg

http://i.imgur.com/t7afeXf.jpg

Night Operation
http://i.imgur.com/Y4rG43N.jpg

I don't know anything about photography and lightning so these pictures really don't do justice.

these are awesome. I bought the knurled aluminium ones but because I have a carbon climate control panel cover in place, they don't fit. How snug are these? I literally have like maybe 1-2 mm of room around the knobs.

Steering wheel badge Version 2.0

Not very pleased with the way my previous custom badge turned out, I decided to start over.

After some research I found the Toyota Hub Cap 2994 had a detachable "T" logo with similar dimensions of our Scion steering wheel badge, instead of the oversized "T" that most people use.

https://i.imgur.com/4U3LJpU.jpg


Cut the Scion badge and fitted this one inside
https://i.imgur.com/D0Eykbo.jpg

Found a piece of leather with similar pattern used in the cover.
https://i.imgur.com/PNyoWxl.jpg

Painted the ring flat black and the logo black chrome with a satin finish. And here's the finished product:
https://i.imgur.com/tiW9Sat.jpg

https://i.imgur.com/As4CDFa.jpg

Not OEM quality but I can live with it. https://www.ft86club.com/forums/imag...lies/smile.gif

Ordered the JDM Toyota 86 red shift knob on ebay. Shipped from Japan. Surprisingly came in a Subaru box with a part number that is not listed anywhere. The quality is exactly the same as my stock knob so I doubt it's a counterfeited part. Anyway, this should match my new leather seats nicely https://www.ft86club.com/forums/images/smilies/wink.gif.

https://i.imgur.com/yZh7wnq.jpg

https://i.imgur.com/Uu0gpEH.jpg

Well, after six months of adding some color to my seats they have degraded into plain fugly:

https://i.imgur.com/nhjzr6a.jpg

https://i.imgur.com/2Z2hkzD.jpg

I was already planning on doing leather seats at a later stage anyway, but it became a priority.

https://i.imgur.com/tBhjhQE.jpg

https://i.imgur.com/M8EIgjC.jpg

https://i.imgur.com/YrqcbbP.jpg

https://i.imgur.com/qrFdJnr.jpg

https://i.imgur.com/raLj2Bf.jpg

https://i.imgur.com/azvedQt.jpg

https://i.imgur.com/6ALhlJi.jpg

https://i.imgur.com/dANAA62.jpg

https://i.imgur.com/Nu2LH85.jpg

https://i.imgur.com/LqHuUOr.jpg

looks great imo. now I want.


I kinda want to do up my interior a bit like the SEMA convertible that had a beige and black theme on the interior.
how do they feel? do they slide around at all on the seat?

Your interior looks great! I'm interested in the armrest. Is that an OEM part (sorry, new to the 86)? Is it this: https://www.toyotapartsdeal.com/oem/...03-06750.html? I also see non-OEM versions that look like yours on ebay for more money, so a little confused. Also, know if it's available anywhere with the orange stitching (I've got the 860SE)?

Thanks.

EDIT: Found it: https://www.86speed.com/products/ora...-rest-lhd.html

I was about to post that link LOL

I was able to source the JDM 2017 Alcantara door trims with red stitching. Why do the Japanese always keep the nicer stuff for themselves? :cry:

https://i.imgur.com/mIEwdLG.jpg

https://i.imgur.com/YilFKbQ.jpg

https://i.imgur.com/bhBEV2A.jpg

https://i.imgur.com/MS6b2gd.jpg

Next: I gotta do something about that center plastic piece on the door cards. Now it looks so out of place...

@Raven86Project; Do you have a part number for the center console bezels? How hard were they to install? Looking at the picture, it appears that they pop out of the center console?

*Edit: Found the info I was looking for here in this thread. Nice work, by the way!

Installed Sweidit Alcantara shifter boot/e-brake combo with leather handle.
https://i.imgur.com/v2lITol.jpg

https://i.imgur.com/3b3ZEPR.jpg

https://i.imgur.com/r0IX7rZ.jpg

Here's a comparison of the three OEM interior trims:
1.JDM 86RC (matte black)
2.BRZ tS (metallic charcoal)
3.Standard (silver)
https://i.imgur.com/JAJ711R.jpg

Just got all the tS parts (except the AC pillars, where I'm keeping the 86RC ones)
https://i.imgur.com/c6OP3uD.jpg

https://i.imgur.com/iSKweUd.jpg

https://i.imgur.com/jM38VAP.jpg

https://i.imgur.com/8ZwmbiZ.jpg


https://i.imgur.com/IekJRRJ.jpg

https://i.imgur.com/PypwSGh.jpg

Got my Tanabe Revel VLS gauges and currently working on the custom placement. Thanks to ft86club user Lunatic for the custom made panel.
https://i.imgur.com/khy0tz1.jpg

https://i.imgur.com/auYDO8Y.jpg

I really like this... that user willing to make more? lol

LOL, maybe. This was a panel that he made for his personal use and when he changed his setup I asked him to purchase it.

I enjoy your Instagram, and saw you got the HKS turbo kit. When is it going on and thoughts on the build quality of it?

Thanks man! I haven't seen too many kits in person to compare with this one but quality seems top notch. The installation is being delayed for one remaining item that hasn't arrived yet. The JDL slim fan kit was ordered Aug 15th and still don't have a delivery date.