Greddy front lip for Toyota 86 painted in d4s black - 220
Jdm clear side markers - 50

Pickup in San Diego

Looking to trade my Greddy CS GTS v2 catback for either a Fujitsubo authorize R catback + cash on my end OR a greddy supreme SP catback

This exhaust purchased used assuming it was fine, but had to be modified as it was tweaked and would refuse to line up to 2 of the rear hangars. Pretty much all the hangars were cut off and rewelded to make the exhaust fit properly. The midpipe portion had to be clearanced for the driveshaft flange. Before anyone mentions it, previous Gen catbacks fit fine on the new Gen, it was an issue with the catback itself, not the car.

The exhaust tips were all stripped of their bluing but left the gold discoloration. This can be polished away, but it will also remove the Greddy logo on the side of the tips.. I’m planning on calling greddy and trying to get new tips to include.
The Greddy center plate was welded on, as the tabs holding it often ripped off. This essentially makes the rear portion one giant piece.

Tldr: underneath it, it ain’t pretty, but no one will even see it.

Despite all this, it DOES still function properly and sounds amazing. Very minimal drone gets drowned by music easily at highway speeds. It’s a quality exhaust and was unfortunately neglected.

I’m looking to trade because I’m looking for something a tad quieter and have a different approach in mind.

Located near Glendale, CA

Oft v2 - SOLD

2017- 2020 BRZ Limited Steering Wheel

Has small scuffs at top of steering wheel.

$100 OBO

Local pick up only in 91311.

https://i.imgur.com/8yBqRHT.jpg
https://i.imgur.com/NLfboPz.jpg
https://i.imgur.com/XFPZDXy.jpg
https://i.imgur.com/67dntg9.jpg

Located in 92691

Primered trunk - SOLD
SSI UEL Catless Header - SOLD
Zenki BRZ Wing (K1X) - SOLD

Cosmis MR-II 5x100 18x8.5 +22 - $500
All wheels have curb rash, 2 have small bends (& hold air).
3 x Firehawk Indy 500 245/35 with tons of tread
1 x POPPED tire, will need replacement
PM for more pics

https://i.postimg.cc/T24pwj5m/IMG-20220122-161305.jpg
https://i.postimg.cc/qR7vBgkj/IMG-20220122-161409.jpg



EDIT: Misc. OEM Pre-2017 parts

https://i.postimg.cc/2SV5RJ1j/IMG-20...-015051-01.jpg
https://i.postimg.cc/kXhnccf0/IMG-20220214-022025.jpg

Struts (no rear bumpstops) $60
Front endlinks $10
Overpipe $20
BNIB Front plate mount $10
Trunk struts/hinges $40
Climate control unit $20
FR-S foglights $25
FR-S grill $20
BRZ DRLs $50
BRZ foglight bezels $20
BRZ tow hook covers (all) $5
Subaru all-weather trunk mat $25
Intake sound tube $10
Differential bolts $15
Wheel locks (like new) $10
Scion badge FREE
Subaru + BRZ badges FREE
STi rear hubs (for 5x114.3 conversion, 0 miles but surface rust) $60

FS: Gruppe-S UEL Headers & Overpipe - $300,
invidia catless resonated front pipe - $125

local pickup in Garden Grove.

https://lh3.googleusercontent.com/pw...-no?authuser=0

https://lh3.googleusercontent.com/pw...-no?authuser=0

WTS/WTT: looking to swap out my TRD sway bars. I have the full front and rear kit that the previous owner purchased as a dealer option when he bought the car originally. I have otherwise stock 2019 suspension - so the rear bar is only a tiny bit larger than the 15mm OEM but the front bar is a lot stiffer. I think it's contributing to some understeer with the 2017+ spring rates. It should be a nice improvement on 2013-2016 suspension or anyone with the TRD lowering springs!

Open to offers and suggestions. I'm totally good with trading back to stock (+cash) with the thick rear stock bar on 2017+, or for earlier gen cars just taking your front bar and buying an aftermarket adjustable rear bar for some post-alignment balance tuning.Attachment 209862Attachment 209863

Sent from my ONEPLUS A6003 using Tapatalk

ISO Perrin SS Drift Button

Wish I was doing this under better circumstances, but here goes... totaled my car recently and I have a lot of rare, high-quality STI JDM parts (imported from Japan) that are up for sale to a good home.

Check out what I have here. Happy to add more pictures. Located in Reno, Nevada but happy to negotiate on shipping. Being in Socal helps with costs. Check out everything I have for sale here.

https://i.imgur.com/tR39h99.jpg

FOR SALE:

STI ts GT Carbon Fiber Wing - $1400
(Imported from Japan) 1 of 3 known (at least to me) in the states. Excellent condition. You will need to get new mounting hardware. The Subaru part number you need is: E7210CA101 see link for part details.

https://i.imgur.com/F1kiQxJ.jpg

https://i.imgur.com/yfr9gWQ.jpg

Varis Arising I Carbon Fiber Hood - $1400
Imported from Japan by Evasive Motors. The Hood is painted in 2014 world rally blue and has a FULL clear bra. Comes with removable rain guards and pre-installed aero latches.

https://i.imgur.com/OT0WMZG.jpg

https://i.imgur.com/J1MflTH.jpg

https://i.imgur.com/3pBd0Wh.jpg

Forged Pro Drives (18+8.5+40 front | 18x9.5+40 rear) - $1700
With Michelin Pilot Sport 4S's[/B] 245 front tires | 265 rear tires. These were bought from the original owner as silver. I powder coated them gloss black. Could use a new powder coating. Comes with TPMS sensors, but will need reprogramming.

https://i.imgur.com/zxc3L99.jpg

https://i.imgur.com/vTMjklA.jpg

STI ts JDM Front Bumper Shrouds/Accents/LED Dayliner Cover Extensions - $150
Imported from Japan parts. Has a full matte clear bra overlay. The clear bra has some damage and nicks but excellent condition underneath. Will need new 3M sticky tape for mounting. Comes with original mounting instructions and templates.

https://i.imgur.com/DA8JWKD.jpg

APR Carbon Fiber Canards - (13-16 BRZ) - $250
Comes with mounting hardware. Canards have a full layer of clear bra - 100% protected and in perfect shape.

https://i.imgur.com/vNNCcwi.jpg

https://i.imgur.com/sbypk6n.jpg

Crystal Cylica Black Radio Antenna - $80
Perfect for that JDM look.

https://i.imgur.com/j79FcBn.jpg

S> 17x9 +35 Vordoven Forme 9 Machine Silver OC
 

Hello everyone. I'm selling a set (4) of Vordoven Forme 9 17x9 +35 wheels. They've been used for 5 years, but are still very clean 8/10. One of the wheels has minor chips. Tires need to be replaced. Tire Sensors installed.

$700

Pickup in Santa Ana, CA


Here's the gallery with a preview of how it'll look on your car!


https://i.imgur.com/8DgEBUQ.jpg

https://i.imgur.com/JHmEXs0.jpg https://i.imgur.com/ByK3CZs.jpg
https://i.imgur.com/9YbOhdo.jpg
https://i.imgur.com/3uaKB7x.jpghttps://i.imgur.com/XPDJz6s.jpg
https://i.imgur.com/FVDGhyn.jpg

BUMP. Car has sold. Many parts available!
 

BUMP. Car has sold. Many parts available!

WTB: Header and o2 Sensor
 

Anyone have a Stock Header and o2 sensor (not defective hopefully) for sale?

thanks!

Selling Tein Flex Z coilovers that I’ve had for approximately 10k miles. Shoot me some offers. Dm for more info